Black Box LGH1006A User manual

724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
Page 5 Page 6
© Copyright 2016. Black Box Corporation. All rights reserved.
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc. Any other trademarks mentioned in this manual
are acknowledged to be the property of the trademark owners.
lgh1006a_qsg_rev1
Quick Start Guide
Has (4) 10/100/1000BASE-T(X) ports and
(2) 100/1000BASE-X SFP ports.
LGH1006A Industrial Ethernet Switch
LGH1006A
Black Box Tech
Support: FREE! Live.
24 / 7. Tech support
the way it should be.
Great tech support is just 60 seconds
away at 724-746-5500 or blackbox.com.
Order toll-free in the U.S.:
Call 877-877-BBOX
(outside U.S. call 1-724-746-5500)
FREE technical support
24 hours a day, 7 days a week:
Call 724-746-5500 or
fax [phone]
Web site: www.blackbox.com
E-mail: [e-mail]
Customer
Support
Information
LGH1006A Quick Start Guide
What’s Included
Your package should include the following
items. If anything is missing or damaged,
contact Black Box Technical Support at
724-746-5500 or [e-mail].
• (1) LGH1000 Series Industrial Ethernet Switch -
(4) 10/100/1000-Mbps, (2) GE SFP
• (1) 6-pin terminal block
• (4) RJ-45 dust covers
• (2) SFP slot dust covers
• (3) M3 round screws
• (2) wall mount brackets and hardware
• (1) DIN rail
• This Quick Start Guide
Specifications
Approvals
Ethernet Standards IEEE 802.3 for 10BASE-T
IEEE 802.3u for 100BASE-TX and 100BASE-FX
IEEE 802.3ab for 1000BASE-T
IEEE 802.3z for 1000BASE-X
IEEE 802.3x for Flow control
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS),
EN61000-4-4 (EFT), EN61000-4-5 (Surge),
EN61000-4-6 (CS), EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Environmental
Operating Temperature -40 to +158° F (-40 to +70° C)
Storage Temperature -40 to +185° F (-40 to +85° C)
Operating Humidity 5 to 95%, noncondensing
Performance
MAC Table 1K MAC addresses
Processing Store-and-Forward
Physical
Connectors (4) 10/100 /1000BASE-T(X) RJ-45,
auto-MDI/MDI-X ports,
(2) 100/1000BASE-X SFP ports
Enclosure IP-30
Dimensions 5.68"H x 1.03"W x 3.74"D
(14.43 x 2.61 x 9.49 cm)
Weight 0.9 lb. (0.41 kg)
Indicators (2) Power LEDs:,
(1) Fault LED,
(4) 10/100/1000BASE-T(X) RJ-45 Port LEDs,
(2) 100/1000BASE-X SFP port LEDs
User Controls
SFP Speed DIP switches 1
and 2 (for ports 5 and 6)
DIP Switch ON: SFP speed is set to 100 Mbps,
DIP Switch OFF: SFP speed is set to
1000 Mbps
Relay Output DIP switches 1
and 2 (for Power 1 and
Power 2 ports)
DIP Switch 1: Power 1 failed warning,
DIP Switch 2: Power 2 failed warning
Specifications (continued)
Power
Input (2) 12–48 VDC inputs on 6-pin terminal block
Consumption 6.4 W (powered device not included)
Overload Current Protection Present
Reverse Polarity Protection Present
Fault Contact Relay Output 1 A at 24 VDC

724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
LGH1006A Quick Start Guide
Table 3. Power DIP switches
for PWR-1 and PWR-2.
Power DIP Switch
Settings
Description
PWR 1 PWR 2
OFF OFF Power failure relay alarm disabled
ON OFF PWR-1 failure, relay alarm enabled
OFF ON PWR-2 failure, relay alarm enabled
ON ON PWR-1 or PWR-2 failure, relay alarm
enabled
Installation
Install the DIN rail or wallmount brackets on the switch
as shown below.
Figure 3. DIN Rail or Wallmount brackets installation.
LGH1006A Quick Start Guide
Page 3Page 2 Page 4
Overview
The LGH1006A Industrial Ethernet Switch is an
unmanaged Ethernet switch, with four 10/100/
1000BASE-T(X) ports and two 100/1000BASE-X SFP
ports. To set the optical network speed SFP port,
change the settings of the DIP switch as described in
Table 3-1. The operating temperature ranges from
-40 to +158° F (-40 to +70° C).
Features
• Provides four 10/100/1000BASE-T(X) ports.
• SFP port supports 100BASE-FX and 1000BASE-X
dual speed.
• Switch supports auto-negotiation and auto-MDI/
MDI-X.
• Uses store-and-forward transmission and flow
control.
• Has IP-30 housing.
• Mounts on a DIN rail or on a wall.
Hardware Description
Figure 1. Front panel.
Table 1. Front panel components.
Component Description
(2) LEDs: PWR1, PWR2 Lights when corresponding power port is
adtive
(1) Power Fault LED Lights when the power fails
(2) SFP Link/Act LEDs Lights when there is actibiy on the
corresponding port
(2) 100/1000BASE-T(X) SFP
port
Lights when the port is operating at 1000
Mbps
(4) Gigabit LAN ports Lights when the port is operating at 1000
Mbps
(4) Port Link/Act. LEDs Lights green when there is activity on the port
(4) 100-Mbps LEDs Lights amber when the corresponding port is
operating at 100 Mbps
Table 2. SFP speed selection DIP switches
(for Ports 5 and 6.
SFP Speed Selection DIP
Switch Positions 1 and 2
Description
Both OFF 1000 Mbps
Both ON 100 Mbps
Power Connection Guide
Figure 2. Power connections.
LGH1006A Quick Start Guide
Attaching the
DIN rail brackets Attaching the
wallmount brackets