BLACK DECKER BXSH44005GB User manual

BXSH44005GBwww.blackanddecker.co.uk
This product is only suitable for well-insulated
spaces or occasional use.
DO NOT COVER

ENGLISH (Original instructions)
2
What’s in the box
Instruction Manual
Tower Heater
Remote Control
Features
1. LCD display / Control Panel
2. Handle / Remote Control
Holder
3. Air Outlet
4. On/Off Switch
5. Base
6. LCD Display
7. ‘-‘ Button
8. ‘+’ Button
9. On/Standby Button
10.Mode Button
11. Oscillation Button
12.Timer Button
Remote Control Key
1. Power On/Off button
2. Mode button
3. Timer button
4. Up button
5. Oscillation button
6. Down button
6
7
8
9
10
11 12
2
3
4
5
1
1
2 4
5
6
3
DO NOT COVER
DO
NOT
COVER

ENGLISH
(Original instructions)
3
Intended Use
Your BLACK+DECKER BXSH44005GB Digital
2.2kW PTC Tower Fan Heater has been designed for
heating small and medium spaces.
This appliance is intended for indoor household use
only.
Thank you for choosing BLACK+DECKER. We hope
that you will enjoy using this product for many years.
Safety Instructions
WARNING: Read all safety
warnings and all instructions. Failure
to follow the warnings and
instructions listed below may result in
electric shock, re and/or serious
injury.
♦ Read this manual carefully before
using the appliance.
♦ The intended use is described in
this manual.
♦ The use of any accessory or
attachment or the performance of
any operation with this appliance
other than those recommended in
this instruction manual may present
a risk of personal injury.
♦ Retain this manual for future
reference.
♦ WARNING: When using mains-
powered appliances, basic safety
precautions, including the following,
should always be followed to
reduce the risk of re, electric
shock, personal injury and material
damage.
Using Your Appliance
Please read the operating
instructions carefully before using
your portable heater for the rst time.
♦ Check that the voltage of the main
circuit corresponds with the rating
of the appliance before operating.
♦ The heater must not be located
immediately below a socket outlet.
♦ Do not use this heater in the
immediate surroundings of a bath,
a shower or a swimming pool.
♦ In order to avoid overheating, do
not cover the heater.
♦ Children of less than 3 years should
be kept away unless continuously
supervised.
♦ Children aged from 3 years and
less than 8 years shall only switch
on/off the appliance provided that
it has been placed or installed
in its intended normal operating
position and they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand the
hazards involved. Children aged
from 3 years and less than 8 years
shall not plug in, regulate and clean
the appliance or perform user
maintenance.
♦ CAUTION: Some parts of this
product can become very hot and
cause burns. Particular attention
has to be given where children and
vulnerable people are present.
♦ Children shall not play with the
appliance.

ENGLISH (Original instructions)
4
♦ Do not let the cable hang over the
edge of a table or counter or let
it come into contact with any hot
surfaces.
♦ The use of accessory attachments
is not recommended by the
appliance manufacturer, apart from
those supplied with this product.
♦ Do not pull the plug out by the
cable as this may damage the plug
and/or the cable.
♦ Do not use this product for anything
other than its intended use.
♦ This appliance is for household use
only.
♦ Do not carry the appliance by the
power cable.
♦ Do not use the appliance outdoors.
♦ Do not operate with wet hands.
♦ Use of an extension cable with this
appliance is not recommended.
However, if it is necessary to use
an extension lead, ensure that
the lead is suited to the power
consumption of the appliance to
avoid overheating of extension
cable, appliance or plug point. Do
not place the extension cable in a
position where it can be pulled on
by children or animals or tripped
over.
♦ Always unplug the unit when not in
use or before cleaning.
♦ The manufacturer does not accept
responsibility for any damage
or injury caused by improper or
incorrect use, or for repairs carried
out by unauthorised personnel.
Safety Of Others
♦ Close supervision is necessary
when any appliance is used by or
near children.
♦ Children should not play with the
appliance.
♦ Cleaning and user maintenance
should not be undertaken by
children without supervision.
♦ Take care when any appliance is
used near pets.
♦ Do not allow the cord to become
twisted or come into contact with
children.
After Use
♦ While cleaning, DO NOT use a wet
cloth or use water on any part of
the unit, as this may cause a short
circuit or electrical shock.
♦ Keep this unit clean. Do not allow
objects to enter the ventilation
opening as this may cause electric
shock, or damage to the unit.
Switch off at the wall socket then
remove the plug from the socket
when not in use or before cleaning.
♦ Check all inlets and outlets from
time to time for accumulated dust.

ENGLISH
(Original instructions)
5
♦ Disconnect the unit from mains
outlet when it is not in use, or
before relocating or cleaning it.
♦ Switch off, remove the plug from
the socket and let the appliance
cool down before leaving it
unattended and before changing,
cleaning or inspecting any parts of
the appliance.
♦ When not in use, the appliance
should be stored in a dry place.
Children should not have access to
stored appliances.
Inspections And Repairs
♦ Do not attempt to dismantle, repair
or remould any part of the unit. This
should only be done by a qualied
service agent. Even the change of
power cable should be done by a
qualied person.
♦ In the unlikely event the appliance
develops a fault, stop using it
immediately and seek advice from
the manufacturer.
♦ In case of technical problems,
switch off the product and do not
attempt to repair it yourself. Return
the appliance to an authorised
service facility for examination,
adjustment or repair. Always
insist on the use of original spare
parts. Failure to comply with the
above mentioned precautions and
instructions, could affect the safe
operation of this product.
Additional Safety Instructions for
This Appliance
♦ Install the unit on at and hard oor
to diminish vibration or noise.
♦ Always operate the appliance on a
smooth, even, stable surface. Do
not place the unit on a hot surface.
♦ Ensure that the unit is switched off
after use.
♦ Do not immerse cables, plugs or
any part of the appliance in water
or any other liquid.
♦ Operate the unit only at the voltage
specied.
♦ Do not use the unit near open
windows, as contact with rain and
other natural elements could cause
an electrical hazard
♦ Do not put heavy objects on the
appliance.
♦ Do not tip the unit on its side.
♦ Never insert any other object into
the unit body to avoid any hazard
or unit failure.
♦ Do not put the unit close to
heat-generating devices or
near ammable and dangerous
materials.
♦ If the supply cable is damaged,
it must be replaced by the
manufacturer or its service agent or
a similarly qualied person in order
to avoid a hazard.

ENGLISH (Original instructions)
6
♦ For optimal airow circulation,
leave a distance of at least 1 metre
around the appliance on every side.
Always direct the airow in order
to optimise heating. Avoid corners,
small objects and other surfaces
or objects which may impede the
airow.
♦ The appliance must be positioned
so that the plug is accessible.
WARNING: Do not place the unit
on or near a hot gas electric burner.
Electrical safety
Before use, check that the mains voltage
corresponds to the voltage on the rating plate.
This product must be earthed. Always
check that the mains voltage
corresponds to the voltage on the rating
plate.
♦ Appliance plugs must match the outlet. Never
modify the plug in any way.
♦ Do not use any adapter plugs with earthed (Class
1) appliances. Unmodied plugs and matching
outlets will reduce the risk of electric shock.
♦ To avoid the risk of electric shock, do not immerse
the cord, plug or appliance in water or other liquid.
Extension cables & class 1 product
♦ A 3 core cable must be used as your tool is
earthed and of class 1 construction.
♦ Up to 30m (100 ft) can be used without loss of
power.
♦ If the supply cord is damaged, it must be
replaced by the manufacturer or an authorised
BLACK+DECKER Service Centre in order to avoid
a hazard.
Labels on Appliance
The following pictograms along with the date code
are shown on the appliance:
WARNING: Hot surface
WARNING: Do not cover
Warning! Before assembling, switch the appliance
off and remove the plug from the socket.

ENGLISH
(Original instructions)
7
Features
1. LCD display / Control Panel
2. Handle / Remote Control Holder
3. Air Outlet
4. On/Off Switch
5. Base
6. LCD Display
7. ‘-‘ Button
8. ‘+’ Button
9. On/Standby Button
10.Mode Button
11. Oscillation Button
12.Timer Button
Use
About the Controls
♦ 2 speed settings and cooling fan
♦ Oscillation function
♦ Timer
Turning the Unit On or Off
♦ To turn the unit On or Off, plug it into a mains
socket and ick the Power On/Off switch at
the back of the appliance to the On position
(represented by the symbol ‘I’). The unit will give
off a short beeping sound to indicate it has been
powered up.
NOTE: When it is rst powered up, the unit will
automatically go into Standby mode. The LCD
screen will show the average heating temperature
(25 degrees) for a moment, then default to displaying
the room temperature until a selection is made.
♦ When the appliance has been powered up, press
the On/Standby button to turn it on. The unit will
automatically start operating in cooling mode
and remain in this setting until another selection
is made. The cooling fan indicator will light up
on the unit’s LCD screen to indicate the unit is in
operation.
♦ To turn the appliance off, rst press the On/
Standby button while the unit is in operation to
put it into Standby mode. A 30-second countdown
will begin on the unit’s LCD screen. When the
timer reaches ‘0’, the unit will automatically go into
Standby mode.
♦ When the countdown has concluded and the unit
is in Standby mode, ick the Power On/Off switch
to the Off position (represented by the symbol ‘O’)
to turn the unit off completely.
Heat Setting Selection
♦ This unit is equipped with a choice of High or Low
heat settings, as well as a cooling fan setting.
♦ Press the Mode button on the remote control
or the unit’s control panel to cycle between the
available heating and cooling settings. The
corresponding indicators will light up on the
unit’s LCD screen to show each setting has been
selected.
Temperature Selection
♦ The unit’s temperature can be adjusted manually
in any of the 3 available heat settings.
♦ Use the Up and Down arrows on the remote
control or the ‘+’ and ‘-‘ keys on the unit’s control
panel to manually adjust the heating output
temperature. Use the Up arrow or ‘+’ key to
increase the temperature, and the Down arrow or
‘-‘ key to decrease it.
NOTE: The temperature will increase or decrease by
increments of 1 degree, from a minimum of 10 to a
maximum of 49 degrees.
NOTE: The unit’s default heating temperature is 25
degrees.
NOTE: Whenever a temperature of 23 degrees or
above is selected, the unit will automatically default
to a High heat setting; whenever a temperature of
20 degrees or below is selected, it will automatically
default to a Low heat setting; whenever the
selected temperature is below room temperature,
it will automatically default to Cooling mode. At
temperatures between 20 and 23 degrees, the heat
settings can be adjusted manually according to
preference.

ENGLISH (Original instructions)
8
Setting the Timer
♦ The unit is equipped with a programmable 8 hour
timer.
♦ Press the Timer button on the remote control or
the unit’s control panel to activate the timer. The
corresponding indicator will light up and the text
‘0H’ will be displayed on the LCD screen to show
the timer function has been activated.
♦ Once the timer has been activated, continuously
press the Timer button to manually adjust the
length of the pre-set heating cycle, from 0 to a
maximum of 8 hours.
NOTE: The length of the timed cycle will increase
or decrease by increments of 1 hour, from 0 up to 8
hours.
Oscillation
♦ This heater is equipped with an oscillation
function.
♦ To activate the oscillation function, press the
Oscillation button on the remote control or the
unit’s control panel. The corresponding indicator
will light up to show the oscillation function has
been selected, and the fan will begin to oscillate.
♦ Press the Oscillation button again while the
function is in operation to turn it off.
Inserting the Batteries
♦ The unit can be operated through its built-in
control panel or the included remote control. To
use the remote control, start by inserting the
batteries.
♦ To insert the battery into the remote control, rst
pull out the battery compartment from underneath
the remote. To do this, push the recessed notch
on the battery cover to the right using a thumb,
then pull the cover towards you and away from the
main body of the remote.
♦ Once the cover has been removed from the
remote, insert 1 x CR2025 battery into the
corresponding slot, ensuring the polarity is
correct.
♦ When you have correctly inserted the battery,
push the battery compartment back into the
remote until it clicks into place.
♦ The remote control is now ready for use.
CR2025
3V

ENGLISH
(Original instructions)
9
Cleaning and maintenance
WARNING: Before cleaning and maintenance,
switch the appliance off and remove the plug from
the socket, to prevent electric shock.
♦ Do not immerse any part of the appliance, power
cord or plug in liquids.
♦ Use a soft damp cloth to wipe the surface. Avoid
using detergent, spray or chemicals as these may
cause damage to the appliance.
Mains plug replacement
If a new mains plug needs to be tted:
♦ Safely dispose of the old plug.
♦ Connect the brown lead to the live terminal in the
new plug.
♦ Connect the blue lead to the neutral terminal.
♦ If the product is class I (earthed), connect the
green/yellow lead to the earth terminal.
Note! If your product is class II double insulated
(only 2 wires in the cord set), no connection is to be
made to the earth terminal.
Follow the tting instructions supplied with good
quality plugs. Any replacement fuse must be of the
same rating as the original fuse supplied with the
product.
WARNING: The above section on mains plug
replacement is for authorized service centre
persons.
Protecting the environment
Separate collection. Products and
batteries marked with this symbol must
not be disposed of with normal household
waste.
Products and batteries contain materials that can
be recovered or recycled, reducing demand for
raw materials. Please recycle electrical products
and batteries according to local provisions. Further
information is available at www.2helpU.com.
Technical data
BXSH44005GB
Input voltage V AC 220 - 240
Frequency Hz 50
Power input W2200
Weight KG 4.8
Product Guarantee
This product comes with a 2 Year guarantee from the
original date of purchase. If any defect arises due to
faulty materials of workmanship, the faulty products
must be returned to the place of purchase. Refund or
replacement is at the discretion of the retailer. This
guarantee is in addition to and in no way prejudices
your statutory rights.
The Following Conditions Apply:
♦ The product must be returned to the retailer
with proof of purchase or a receipt within the
1st year of purchase. For any product related
issues after 12 months please contact our
customer services team.
♦ The product must be installed and used in
accordance with the instructions contained in
this instruction guide.
♦ It must be used only for domestic purposes.
♦ It does not cover wear and tear, damage,
misuse or consumable parts.
♦ This guarantee is valid in the UK and Republic
of Ireland.
For all customer service enquires please contact
us below;
RKW,
Sutton House,
Berry Hill Road,
Stoke-on-Trent,
ST4 2NL
Email [e-mail]
Tel [phone]

ENGLISH (Original instructions)
10
Model Identier(s): BXSH44005GB
Item Symbol Value Unit Item Unit
Heat Output Type of heat input for electric storage, local space
heaters only (select one)
Nominal heat
output Pnom 2.2 kW Manual heat charge with integrated thermostat No
Minimum heat
output (indicative) Pmin 0kW Manual heat charge control with room and/or outdoor temperature feedback No
Maximum
continuous heat
output
Pmax, c 2.2 kW Electronic heat charge control with room
and/or outdoor temperature feedback No
Auxiliary electricity
consumption Fan assisted heat output No
At nominal heat
output elmax 0kW Type of heat output/room temperature control (select one)
At minimum heat
output elmin 0kW Single stage heat output and no room temperature control No
In standby mode eISB 0.000 kW Two or more manual stages, no room
temperature control No
With mechanic thermostat room
temperature control No
With electronic room temperature control No
Electronic room temperature control plus
day timer Yes
Electronic room temperature control plus
week timer No
Other control options (multiple selections possible)
Room temperature control with presence
detection No
Room temperature control with open
window detection No
With distance control option No
With adaptive start control No
With working time limitation No
With black bulb sensor No
Contact Details: Imported by Black & Decker, 210 Bath Road, Slough, Berkshire SL1 3YD

11

United Kingdom & Black & Decker Tel. [phone]
Republic Of Ireland 210 Bath Road Fax [phone]
www.blackanddecker.co.uk Slough, Berkshire SL1 3YD
emeaser[email protected]
08/2019