BLACK DECKER BDXPA0001 User manual

1
INSTRUCTION MANUAL
CATALOG NUMBERS
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, go to http://www.blackanddeckerelectrical.com
If you can’t find the answer or do not have access to the Internet, call
1-844-746-6688 from 9 a.m. to 5 p.m. EST Mon.-Fri. to speak with an agent.
Please have the catalog number available when you call.
Indoor Wireless Remote Control Outlet
BDXPA0001
SSAVE THI MANUAL FOR FUTURE REFERENCE.

2
ENGLISH
English (original instructions) 3
Español (traducido de las instrucciones originales) 8

3
Important Safety Guideline
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to
hazardous situations and your risk of personal injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may
result in property damage.
WARNING: PLEASE READ THIS INSTRUCTION MANUAL THOROUGHLY AND
COMPLETELY BEFORE INSTALLATION & USE. FAILURE TO DO SO COULD
CAUSE DAMAGE TO PROPERTY, SERIOUS INJURY OR DEATH, AND VOID YOUR
WARRANTY.
For California residents / Pour les résidents de la Californie / Para residentes en California
WARNING:Cancerand ReproductiveHarm -
www.P65Warnings.ca.gov.
AVERTISSEMENT: Cancer et Troubles de l'appareil reproducteur -
www.P65Warnings.ca.gov.
ADVERTENCIA:Cáncer y Daño Reproductivo-
www.P65Warnings.ca.gov.
s

4
Indoor Wireless Remote Control Outlet
Power input: 125V/60Hz
Power output: 1250W/10A (Max.)
Transmitter frequency: 433.92MHz
Remote transmitter battery: DC CR2032, 3V battery 1pc
Transmission range: up to 100ft
23
Plug the receiver into a standard
AC electrical wall socket.
Plug the appliance into the receiver
outlet.
2. To manually control the outlet, press the
ON or OFF button on the remote control.
Once completed, you can then use the
remote control to turn the connected
outlet ON/OFF.
3.
1
1.Step A: Locate the battery compartment on the back
of the remote.
Push down and away to slide the compartment
cover off.
Step B: Remove the plastic battery tab from the battery
compartment in the back of the remote control
to activate the pre-installed battery.
Step C: Slide the compartment cover on the remote
and click securely into place. Your remote is
now ready to use.
OFFON
Specifications:
WARNING: Danger of explosion if battery is incorrectly replaced. When replacing battery,
replace it with the same or equivalent type CR2032. Observe correct polarity (+ and –) when
replacing batteries. Do not store or carry batteries so that metal objects can contact exposed
battery terminals.
DANGER: DO NOT INGEST BATTERY; CHEMICAL BURN HAZARD. This product contains
a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close
securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.

Indoor Wireless Remote Control Outlet
5
1. Appliances to be connected to the remote control socket MUST NOT exceed the
voltage and current ratings as in “Specifications”.
2. Operation is subject to the following two conditions:
(1) this appliance may not cause harmful interference, (2) this appliance must accept
any interference received, including interference that may cause undesired operation.
3. Only for indoor use and storage.
4. Low transmitter battery may lower the distance between the transmitter and the receiver.
Remote Battery Replacement:
If operation of the receiver unit becomes erratic, it may be necessary to replace the battery
in the hand-held remote unit. To do this, first remove the battery compartment cover. Press
the tray release button on the back of the remote. Next, remove the depleted battery and
discard according to local ordinances. Be sure to correctly install the new battery. Replace
battery compartment cover and test by using it to control the indoor remote control outlet.
CAUTION:

CAUTION: WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS.
Repair or replace damaged cords.
Indoor Wireless Remote Control Outlet
6
Double Insulation
Double insulated appliances are constructed throughout with two separate layers of electri-
cal insulation or one single layer of reinforced insulation between the user and the
appliance’s electrical system. Products built with this insulation system are not intended to
be grounded. As a result, this appliance is equipped with a two-prong plug which permits it to
be used without concern for maintaining a ground connection.
NOTE: Double insulation does not take the place of normal safety precautions when
operating this appliance. The secondary insulation system is for protection against injury
resulting from a possible failure of the primary insulation within the product.
Polarized Plugs
Polarized plugs (one blade is wider than the other) are used on equipment to reduce the
risk of electric shock. When provided, this plug will fit in the polarized outlet only one way.
WARNING:
Do not alter the plug in any way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
WARNING: A grounded appliance with an adaptor is not recommended.

Indoor Wireless Remote Control Outlet
7
1 YEAR LIMITED WARRANTY
IMPORTANT: Proof of Purchase is required to obtain warranty service.
Paragon Group USA Inc. warrants to the original owner that our products will be free from
defect in workmanship and material for a period of ONE YEAR from the date of purchase.
Should any unit(s) prove to be defective during this period, Paragon Group USA Inc. will be
responsible for replacement of the defective unit(s) only. Paragon Group USA Inc. is not
responsible for labor charges or any incidental or consequential expenses.
Not Covered – Batteries are not covered by this warranty. Repair service, adjustment and
calibration due to misuse, abuse or negligence are not covered by this warranty. Unautho-
rized service or modification to this product or of any furnished components will void this
warranty in its entirety.
This warranty does not include reimbursement for inconvenience, installation, set-up time,
loss of use, postage, unauthorized service, or other products used in conjunction with
BLACK+DECKER products.
Copyright 2021 Black&Decker
BLACK+DECKER and the BLACK+DECKER Logo are
trademarks of Stanley Black Decker, Inc. or
an affiliate thereof and are used under license.
Ph: 1-844-746-6688
www.blackanddeckerelectrical.com
E-mail: [email protected]
Imported by:
Paragon Group USA,
Englewood, NJ, 07631
USA
C

1
INSTRUCTION MANUAL
CATALOG NUMBERS
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, go to http://www.blackanddeckerelectrical.com
If you can’t find the answer or do not have access to the Internet, call
1-844-746-6688 from 9 a.m. to 5 p.m. EST Mon.-Fri. to speak with an agent.
Please have the catalog number available when you call.
Indoor Wireless Remote Control Outlet
BDXPA0001
SSAVE THI MANUAL FOR FUTURE REFERENCE.

2
ENGLISH
English (original instructions) 3
Español (traducido de las instrucciones originales) 8

3
Important Safety Guideline
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to
hazardous situations and your risk of personal injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may
result in property damage.
WARNING: PLEASE READ THIS INSTRUCTION MANUAL THOROUGHLY AND
COMPLETELY BEFORE INSTALLATION & USE. FAILURE TO DO SO COULD
CAUSE DAMAGE TO PROPERTY, SERIOUS INJURY OR DEATH, AND VOID YOUR
WARRANTY.
For California residents / Pour les résidents de la Californie / Para residentes en California
WARNING:Cancerand ReproductiveHarm -
www.P65Warnings.ca.gov.
AVERTISSEMENT: Cancer et Troubles de l'appareil reproducteur -
www.P65Warnings.ca.gov.
ADVERTENCIA:Cáncer y Daño Reproductivo-
www.P65Warnings.ca.gov.
s

4
Indoor Wireless Remote Control Outlet
Power input: 125V/60Hz
Power output: 1250W/10A (Max.)
Transmitter frequency: 433.92MHz
Remote transmitter battery: DC CR2032, 3V battery 1pc
Transmission range: up to 100ft
23
Plug the receiver into a standard
AC electrical wall socket.
Plug the appliance into the receiver
outlet.
2. To manually control the outlet, press the
ON or OFF button on the remote control.
Once completed, you can then use the
remote control to turn the connected
outlet ON/OFF.
3.
1
1.Step A: Locate the battery compartment on the back
of the remote.
Push down and away to slide the compartment
cover off.
Step B: Remove the plastic battery tab from the battery
compartment in the back of the remote control
to activate the pre-installed battery.
Step C: Slide the compartment cover on the remote
and click securely into place. Your remote is
now ready to use.
OFFON
Specifications:
WARNING: Danger of explosion if battery is incorrectly replaced. When replacing battery,
replace it with the same or equivalent type CR2032. Observe correct polarity (+ and –) when
replacing batteries. Do not store or carry batteries so that metal objects can contact exposed
battery terminals.
DANGER: DO NOT INGEST BATTERY; CHEMICAL BURN HAZARD. This product contains
a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close
securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.

Indoor Wireless Remote Control Outlet
5
1. Appliances to be connected to the remote control socket MUST NOT exceed the
voltage and current ratings as in “Specifications”.
2. Operation is subject to the following two conditions:
(1) this appliance may not cause harmful interference, (2) this appliance must accept
any interference received, including interference that may cause undesired operation.
3. Only for indoor use and storage.
4. Low transmitter battery may lower the distance between the transmitter and the receiver.
Remote Battery Replacement:
If operation of the receiver unit becomes erratic, it may be necessary to replace the battery
in the hand-held remote unit. To do this, first remove the battery compartment cover. Press
the tray release button on the back of the remote. Next, remove the depleted battery and
discard according to local ordinances. Be sure to correctly install the new battery. Replace
battery compartment cover and test by using it to control the indoor remote control outlet.
CAUTION:

CAUTION: WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS.
Repair or replace damaged cords.
Indoor Wireless Remote Control Outlet
6
Double Insulation
Double insulated appliances are constructed throughout with two separate layers of electri-
cal insulation or one single layer of reinforced insulation between the user and the
appliance’s electrical system. Products built with this insulation system are not intended to
be grounded. As a result, this appliance is equipped with a two-prong plug which permits it to
be used without concern for maintaining a ground connection.
NOTE: Double insulation does not take the place of normal safety precautions when
operating this appliance. The secondary insulation system is for protection against injury
resulting from a possible failure of the primary insulation within the product.
Polarized Plugs
Polarized plugs (one blade is wider than the other) are used on equipment to reduce the
risk of electric shock. When provided, this plug will fit in the polarized outlet only one way.
WARNING:
Do not alter the plug in any way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
WARNING: A grounded appliance with an adaptor is not recommended.

Indoor Wireless Remote Control Outlet
7
1 YEAR LIMITED WARRANTY
IMPORTANT: Proof of Purchase is required to obtain warranty service.
Paragon Group USA Inc. warrants to the original owner that our products will be free from
defect in workmanship and material for a period of ONE YEAR from the date of purchase.
Should any unit(s) prove to be defective during this period, Paragon Group USA Inc. will be
responsible for replacement of the defective unit(s) only. Paragon Group USA Inc. is not
responsible for labor charges or any incidental or consequential expenses.
Not Covered – Batteries are not covered by this warranty. Repair service, adjustment and
calibration due to misuse, abuse or negligence are not covered by this warranty. Unautho-
rized service or modification to this product or of any furnished components will void this
warranty in its entirety.
This warranty does not include reimbursement for inconvenience, installation, set-up time,
loss of use, postage, unauthorized service, or other products used in conjunction with
BLACK+DECKER products.
Copyright 2021 Black&Decker
BLACK+DECKER and the BLACK+DECKER Logo are
trademarks of Stanley Black Decker, Inc. or
an affiliate thereof and are used under license.
Ph: 1-844-746-6688
www.blackanddeckerelectrical.com
E-mail: [email protected]
Imported by:
Paragon Group USA,
Englewood, NJ, 07631
USA
C

8
MANUAL DE INSTRUCCIONES
NÚMEROS DE CATÁLOGO
¡Gracias por elegir BLACK+ DECKER!
LEA ANTES DE DEVOLVER ESTE PRODUCTO POR CUALQUIER RAZÓN.
Tomacorriente con control remoto
inalámbrico para interiores
BDXPA0001
CONSERVE ESTE MANUAL PARA REFERENCIA FUTURA.
Si tiene alguna pregunta o problema con su compra de BLACK+DECKER,
diríjase a http://www.blackanddeckerelectrical.com.
Si no puede encontrar la respuesta o no tiene acceso a internet, llame al
1-844-746-6688 de 9a.m. a 5p.m. (EST), de lunes a viernes para hablar con un agente.
Tenga a mano el número de catálogo cuando llame.

9
3
Español (traducido de las instrucciones originales) 8
English (original instructions)
ESPAÑOL

10
Definiciones: Símbolos y palabras de alerta de seguridad
For California residents/Pour les résidents de la Californie/Para residentes en California
WARNING:CancerandReproductiveHarm
www.P65Warnings.ca.gov.
AVERTISSEMENT: Cancer et Troubles de l'appareil reproducteur -
www.P65Warnings.ca.gov.
ADVERTENCIA:Cáncer y Daño Reproductivo
www.P65Warnings.ca.gov.
Este manual de instrucciones utiliza los siguientes símbolos y palabras de alerta de
seguridad para alertarlo de situaciones peligrosas y del riesgo de lesiones personales o
daño a la propiedad.
PELIGRO: Indica una situación peligrosa inminente que, si no se evita, resultará en la
muerte o en una lesión grave.
ADVERTENCIA: Indica una situación peligrosa potencial que, si no se evita, podría
resultar en la muerte o en una lesión grave.
PRECAUCIÓN: Indica una situación peligrosa potencial que, si no se evita, es posible
que resulte una lesión menor o moderada.
(Utilizado sin palabra) Indica un mensaje relacionado con la seguridad.
AVISO: Indica una práctica no relacionada con una lesión personal que, si no se evita,
es posible que resulte en daño a la propiedad.
ADVERTENCIA: LEA ESTE MANUAL DE INSTRUCCIONES MINUCIOSA Y COM-
PLETAMENTE ANTES DE LA INSTALACIÓN Y EL USO. EN CASO DE QUE NO LO
HAGA PODRÍA CAUSAR DAÑO A LA PROPIEDAD, LESIONES GRAVES O LA
MUERTE, Y DEJAR SIN EFECTO LA GARANTÍA.
CONSERVE ESTAS INSTRUCCIONES PARA REFERENCIA FUTURA.
Guía de seguridad importante

11
Tomacorriente con control remoto inalámbrico para interiores
Alimentación de corriente eléctrica: 125 V/60 Hz
Salida de corriente eléctrica: 1250 W/10 A (Máx.)
Frecuencia del transmisor: 433.92 MHz
Batería del transmisor con control remoto: Una batería DC CR2032, 3 V
Rango de transmisión: hasta 100 ft (30 m)
23
Enchufe el aparato en el
tomacorriente del receptor.
3.
1
APAGARENCENDER
Especificaciones:
ADVERTENCIA: Peligro de explosión si se pone mal la batería. Cuando cambie la
batería, reemplácela con el mismo tipo o un tipo equivalente a CR2032. Observe que la
polaridad (+ y –) sea la correcta cuando la cambie. No guarde o traslade las baterías de
manera que los objetos metálicos puedan entran en contacto con las terminales expuestas
de dicha batería.
PELIGRO: NO INGIERA LA BATERÍA; PELIGRO DE QUEMADURA QUÍMICA. Este
producto contiene una batería tipo botón. Si se traga la batería tipo botón, puede causar
quemaduras internas graves en solo dos horas y esto puede llevar a la muerte.
Mantenga las baterías nuevas y las usadas fuera del alcance de los niños. Si el compar-
timiento de la batería no cierra de forma segura, deje de usar el producto y manténgalo fuera
del alcance de los niños.
Si cree que alguien podría haberse tragado las baterías o que podría haberlas puesto dentro
de alguna parte del cuerpo, busque atención médica de inmediato.
1. Paso A:
Paso B:
Paso C:
Presione hacia abajo y hacia afuera para sacar
la tapa del compartimiento deslizándola.
Ubique el compartimiento de la batería en
la parte posterior del control remoto.
Quite la pestaña de plástico del compartimiento de la
batería en la parte posterior del control remoto para
activar la batería que viene instalada.
Deslice la tapa del compartimiento del control remoto
hasta que haga “clic” en el lugar correcto. Su control
remoto está listo para ser usado.
2. Enchufe el receptor en una toma
eléctrica de pared estándar de CA.
Para controlar de forma manual el tomacorri-
ente, presione el botón ON (encendido) u
OFF (apagado) del control remoto.
Una vez que haya finalizado, puede usar el
control remoto para ENCENDER/APAGAR
el tomacorriente conectado.

Tomacorriente con control remoto inalámbrico para interiores
12
2. Su funcionamiento está sujeto a las siguientes dos condiciones:
3. Únicamente para uso y almacenamiento en interiores.
4. Si el transmisor tiene poca batería, puede disminuir la distancia entre el transmisor
y el receptor.
PRECAUCIÓN:
Si falla el funcionamiento de la unidad receptora, es posible que tenga que reemplazar la
batería de la unidad portátil del control remoto. Para hacer esto, primero quite la tapa del
compartimiento de la batería. Presione el botón para liberar la bandeja de la parte
posterior del control remoto. Luego, quite la batería agotada y deséchela conforme a las
normas locales. Asegúrese de instalar la batería nueva de forma correcta. Vuelva a
poner la tapa del compartimiento de la batería y pruebe el control usándolo para controlar
el tomacorriente con control remoto para interiores.
1. Los aparatos que se vayan a conectar a la toma del control remoto NO DEBEN
exceder las clasificaciones de voltaje y corriente mencionados en “Especificaciones”.
(1) Este aparato no puede causar interferencia dañina; y (2) este aparato debe aceptar
cualquier interferencia recibida, lo que incluye interferencia que puede causar un
funcionamiento indeseado.
Reemplazo De La Batería Del Control Remoto:

PRECAUCIÓN: UTILICE SOLO PARTES DE REPUESTO IDÉNTICAS EN LA REPARACIÓN.
Repare o reemplace los cables dañados.
Tomacorriente con control remoto inalámbrico para interiores
13
Doble aislamiento
Los aparatos con doble aislamiento se construyen con dos capas separadas de aislamiento
eléctrico o una única capa de aislamiento reforzado entre el usuario y el sistema eléctrico
del aparato. Los productos construidos con este sistema de aislamiento no están creados
para tener conexión a tierra. En consecuencia, este aparato está equipado con un enchufe
de dos clavijas que permite usarlo sin tener la preocupación de la conexión a tierra.
NOTA: El doble aislamiento no reemplaza las precauciones de seguridad normales cuando
se lo utiliza. El sistema de aislamiento secundario es para la protección contra lesiones
causadas por una posible falla del aislamiento principal dentro del producto.
Enchufes polarizados
Los enchufes polarizados (una clavija es más ancha que la otra) se utilizan en el equipo
para reducir el riesgo de descarga eléctrica. Cuando se brinde este tipo de enchufe,
entrará en el tomacorriente polarizado únicamente de una manera.
ADVERTENCIA: No se recomienda el uso de un aparato con un adaptador con
conexión a tierra.
ADVERTENCIA: No modifique el enchufe de ninguna forma. Si el enchufe no entra
completamente en el tomacorriente, delo vuelta. Si aun así no entra, comuníquese con un
electricista calificado para que instale el tomacorriente adecuado.