SACKit Touch 100 User manual

1
SACKit Touch 100
USER MANUAL
BRUGERMANUAL
GEBRAUCHSANLEITUNG
UK
DK
DE

2
CONTENT
Thank you! ................... 3
Quick Start Guide ............. 4
Product overview ............. 4
Product functionality........... 5
The Device ................... 6
Product setup. . . . . . . . . . . . . . . . . 8
Troubleshooting .............. 9
Cleaning of the product ........ 10
Technical specifications ........ 10
Important safety information ... 11
Disposal of the product ........ 12
Complaints ................... 12
Tak! ......................... 13
Quick Start Guide ............. 14
Produkt overblik .............. 14
Produkt funktioner ............ 15
Beskrivelse af produktet ........ 16
Produkt opsætning ............ 18
Troubleshooting .............. 19
Rengøring af produktet......... 20
Tekniske specifikationer ........ 20
Vigtig sikkerhedsinformation .... 21
Bortskaffelse af produktet ...... 22
Reklamationer ................ 22
Vielen dank! .................. 23
Kurzanleitung................. 24
Produktübersicht .............. 24
Funktionen ................... 25
Produktbeschreibung .......... 26
Produkteinstellung............. 28
Fehlersuche .................. 29
Reinigung .................... 30
Produktangaben............... 30
Entsorgung................... 32
Reklamation .................. 32

3
THANK YOU!
Thank you for purchasing the SACKit Touch 100 Bluetooth & Acve Noise Cancellaon
headphone from SACKit. Please read the entire instruction manual before using the
product and save it for future reference. We reserve the right to change or update
information and to correct errors, inaccuracies, or missions in text, images, and technical
data. If you have any questions regarding technical problems please contact our customer
services. We hope you will enjoy your new SACKit Touch 100 headphones.
Let SACKit rock your life!

4
QUICK START GUIDE
When you first get your SACKit Touch 100 headphones you need to charge them before they are ready
for use. SACKit Touch 100 is charged by using the included USB cable.
Charge SACKit Touch 100 for 4 hours minimum before using the product the first time.
Please turn off your headphones after use to prolong battery life.
PRODUCT OVERVIEW
3. 3.5mm AUX
2. Acve Noise
Cancellaon (ANC)
5. Volume up
5. Volume down
6. X Buon
8. Charging Port
4. Headband
1. Double Doughnut
design
7. Power Indicator

5
PRODUCT FUNCTIONALITY
Here follows a description of all the products features. Please use the ’Product Overview’ in the beginning
of this user manual to locate them on the SACKit Touch 100 (page 4).
1. Double doughnut design
• The double doughnut ear cushions ensure both comfort and sound quality by direcng sound at you
and encapsulates the whole sound without being uncomfortable to wear for a longer me.
2. Active Noise Cancellation (ANC)
• Press the Acve noise cancellaon buon to acvate ANC
• With ANC acvated you can minimize background noise to further enjoy your music
3. 3.5 mm AUX
• 3.5 mm AUX jack connecon to connect the headset to a device without Bluetooth
• In-line use is possible when the baery is empty
4. Headband
• Adjustable headband to ensure a comfortable t for everyone
5. Volume up/down
• Volume buons used to adjust the volume of SACKit Touch 100
• Also used to skip to next or previous song
6. X Button
• Master funcon buon
• Used to power SACKit Touch 100 on and o
• Plays and pause music when the headset is in Bluetooth mode
• Accepts and rejects incoming calls
7. Power indicator
• Indicates when SACKit Touch 100 is turned on and o
• Flashes when SACKit Touch 100 is in Bluetooth pairing mode
8. Charging port
• Charging port for the included USB charging cable

6
How to pair SACKit Touch 100 and your device
1. First use: Long press the X Buon for 10 seconds. Aer the rst 5 seconds, you will hear the ON
sound. Keep pressing the buon for another 5 seconds to turn on pairing mode, indicated by ashing
the power indicator red and blue
2. Switch on Bluetooth on your device
3. Choose “SACKit Touch 100” under Bluetooth sengs on your device. Your headphones are now con-
nected with your device
4. Start playing music on your device
5. Long press the X buon to turn o your SACKit Touch 100 headphones
6. SACKit Touch 100 will automacally pair with the last connected device
To connect to a newdevice make sure that the previous connected device is disconnected otherwise con-
necng opportunity won’t appear on the new device.
THE DEVICE
Operation instructions for use after first pairing
1. Aer rst me pairing your SACKit Touch 100 headphones and your Bluetooth device will be conne-
cted automacally
2. Bluetooth device will automacally reconnect, the LED light will blink blue once SACKit Touch 100
is successfully paired.
3. Turn the headphones on by holding down the X buon unl you hear the ON sound
4. Long press X buon to turn o SACKit Touch 100
Note: If the pairing is not successful, please turn the headphone off and back on and retry pairing.
Operation instructions for in-line use
Use the 3.5mm audio cable when you do not wish to use Bluetooth connection or when the battery needs
recharging. In-line use is possible when the battery is empty.
For in-line use:
• Connect the 3.5mm plug intoyour SACKit Touch 100 Headphone 3.5mm jack, then connect the oth-
er 3.5mm plug to your device 3.5mm jack
• Adjust the volume using the controls on your mobile phone
• Enjoy the music
Bluetooth Multipoint
SACKit Touch 100 comes with the Bluetooth Multipoint feature. This means that up to two devices
can be connected to the headphones at the same time. This enables you to for example connect the
headphones to a computer and a smartphone at the same time. To switch between the two devices,
just pause the music/sound on one device and press play on the other. If your phone rings, the SACKit
Touch 100 will automatically jump on the phone.
To connect a second Bluetooth device after a first one is already connected:
1. Turn o the SACKit Touch 100,
2. Then long press the X Buon for 10 seconds. Aer the rst 5 seconds, you will hear the ON sound.
Keep pressing the buon for another 5 seconds to turn on pairing mode, indicated by ashing the
power indicator red and blue
3. Switch on Bluetooth on your new device
4. Choose “SACKit Touch 100” under Bluetooth sengs on your device. Your headphones are now
connected with your new device

7
How to use the Active Noise Cancellation function
1. Push the ANC buon on the le ear cup turning on the green LED light and you can enjoy the headp-
hones in Acve Noise Cancellaon mode
2. When you don’t need the Acve Noise Cancellaon funcon, turn the ANC funcon of by pushing the
ANC buon
3. Acve Noice Cancellaon can be acvated and deacvated even when the SACKit Touch 100 Head-
phone is turned o. The Acve Noise Cancellaon will also remain on even when you turn the SACKit
Touch 100 Headphone o.
Battery information
• Baery: rechargeable Polymer Lithium-Ion Baery, DC: 3.7V/500mAh
• Power: USB DC5V, Please use the USB cable sealed with our headphone for charging
• Charging Time: For rst me use please be sure the baery has been charged fully before use. It
needs more than 4 hours of charging the rst me, then 2-3 hours for recharging
• When the red light is on, the headphone is in charge mode. The red light will turn o when the baery
is fully charged.

8
Making calls with SACKit Touch 100
WhenSACKitTouch100connectedtoyourdevice,youcananswerandtakecallsthroughtheheadphones
wirelessly.
Funcons Status of headphone Operaon
Redial Last number Standby mode Short press X button twice quickly
Volume up Conversation mode Short press Volume(+) button
Volume down Conversation mode Short press Volume(-) button
Answering calling Ringing Short press X button
End call Conversation mode Short press X button
Reject calling Ringing Press and hold X button for one
second until you hear indication
sound
Transfer the calling between
headset and Bluetooth
devices
Conversation mode Press and hold the X button
for 3 seconds can transfer the
conversation from headset to mobile
phone. Then press and hold the X
button for 3 seconds to transfer the
conversation back from mobile phone
to headphone.
Note: Not all the mobile phones support all the functions listed above. Please refer to the instruction of
your device. Some functions and indication tones may vary with depending on the device.
PRODUCT SETUP
Here follows a descripon of the setup of the product. A detailed descripon of the buon’s and funco-
nality can be found at pages 4 to 5.
Playing Music with SACKit Touch 100
When SACKit Touch 100 connects with the mobile phone or Bluetooth transmitter, you can enjoy music
through the headphone wirelessly.
Funcons Status of headphone Operaon
Pause Playing music Short Press X button
Play Pausing Short Press X button
Next track Playing music Short press volume(+) button
Previous track Playing music Short press volume(–) button
Volume up Playing music Long press Volume(+) button
Volume down Playing music Long press Volume(-) button

9
TROUBLESHOOTING
If you have trouble using your SACKit Touch 100 we ask you to try the following soluons. If these
soluons does not x your problem please contact our customer service at [email protected].
I experience issues with stability and connecon
• Try to delete the pairing between SACKit Touch 100 and your device on the device. You do this by
accessing the Bluetooth sengs on your device and choose “forget SACKit Touch 100”. Now pair
SACKit Touch 100 and your device by following the descripon found on 6
SACKit Touch 100 is not playing music while connected to my device
• Please check volume on your audio device to make sure it is outpung sound
• If you use in-line please make sure that the 3.5mm plug is fully inserted into your audio device and
headset. And please make sure the headphone plug and audio device’s jack scks are clean
• If SACKit Touch 100 is used wirelessly and sll is not playing music, you manually have to choose to
play from SACKit Touch 100 in your device sengs. Please refer to the instrucon of your device or
specic app for further informaon
I’m hearing a beep-sound in my headset
• WhenSACKitTouch100makesabeep-sound,theyneedrecharging.Pleasechargeyourheadphonesfully
I don’t feel like SACKit Touch 100 is comfortable to wear
• Please adjust the length headband by pull/pushing the earcups to adjust to headset for a comfortable
t
I can’t turn on my headset
• Please recharge your headset by leaving the headset in the charger for minimum 4 hours

10
CLEANING OF THE PRODUCT
1. Kindly switch o SACKit Touch 100 before you clean your headset and remove it from the power
supply
2. Do not use any chemicals to clean the product. If you need to clean the headset, please use a so cloth
with a mild cleaner
3. During cleaning please be aware to avoid water in the USB port, speakers, microphone, and buons.
Large amounts of water and uids may damage the headset
4. Use a so, dry, and lint-free cloth to gently clean the speaker fabric.
NOTE: Avoid using sharp objects to clean SACKit Touch 100 earbuds and charging case
TECHNICAL SPECIFICATIONS
• Model: SACKit Touch 100 Bluetooth and ANC headphones
• Bluetooth version: V5.0
• Operang distance: 10M
• Bluetooth Mulpoint
• Baery: 500mAh
• Charging me: 3 hours
• Charging current: 220mA
• Music playing me:
25 hours (bluetooth on, ANC o)
18 hours (Bluetooth on, ANC on)
• Call me: 25 hours
• ANC soluon: MAX
• Noise reducon performance: up to 22dB
• Frequency Range: 20Hz-20KHz
• Impedence:ANC_OFF:80Ω ANC_ON :110Ω
• Size: 42*175*197mm
• Weight: 197g

11
IMPORTANT SAFETY INFORMATION
Please read the following informaon and operate the product and accessories accordingly to ensure
correct and safe use of the product. We are not responsible for damage caused by failure to comply with
the instrucons or irresponsible use of the product.
Warning
To prevent any res or electrical hazards please act according to the following guidelines:
• Do not disassemble or replace any parts of this device. Please contact professional maintenance or
qualied service center if there is any damage to the device.
• Do not place in any liquid
• If any liquids ows inside the product, please shut down the product and contact customer service
center
• Do not place this device in or close to sources of excessive heat or re. (Such as: candles, replaces or
direct sunlight)
• Please shut down in lightning weather
• Keep this device away from any dust and vibraon.
• Do not use excessive force when using any of the control buons.
• If the product is below 5°C when you receive it, please open the product packaging and wait for it to
reach room temperature.
• To prevent overheang of the product is it necessary to keep a cleared area of 10 cm around the
product while charging
• Be sure to place this device on stable, at and level surfaces while charging.

12
DISPOSAL OF THE PRODUCT
SACKit Touch 100 is made from recyclable and high quality materials. Do not dispose of together with
living garbage. Please understand the local classicaon about collecng electronical, electrical products
that contains baeries. Correct disposal of the product will help to prevent negave impact to the en-
vironment.
COMPLAINTS
Please contact our customer service if you have a complaint or a broken SACKit Touch 100 headset. If
your headset has a defect, please inform your serial number, when you contact us.

13
TAK!
Tak fordi du valgte SACKit Touch 100 Headphone med Bluetooth og Acve Noice Can-
cellaon fra SACKit. Vi beder dig læse hele denne brugermanual grundigt, før du tager
SACKit Touch 100 i brug. Gem venligst brugermanualen, så du ald kan slå op i den. Vi
tager forbehold for fejl i tekst eller billeder og nødvendige ændringer i de tekniske speci-
kaoner. Hvis du oplever tekniske problemer, beder vi dig kontakte vores kundeservice.
Vi håber, du får stor glæde af din nye SACKit Touch 100 Headphone.
Let SACKit rock your life!

14
QUICK START GUIDE
Når du modtager dine SACKit Touch 100 headphones skal de oplades før de er klar til brug. SACKit
Touch 100 skal oplades ved hjælp af usb kablet inkluderet i pakken.
SACKit Touch 100 skal oplades i minimum 4 timer før brug.
Husk at slukke for SACKit Touch 100 efter brug for at forlænge batteriets levetid
PRODUKTOVERBLIK
3. 3.5mm AUX
2. Acve Noise
Cancellaon (ANC)
5. Volume up
5. Volume down
6. X Buon
8. Charging Port
4. Headband
1. Double Doughnut
design
7. Power Indicator

15
PRODUKT FUNKTIONER
Herunder følger en beskrivelse af knapper og alle produktets funkoner, knappens nummre henviser l
’Produktoverblikket’ præsenteret på side 4.
1. Double doughnut design
• Det specielle design af ørepuderne sikrer komfort, lydkvalitet og mindre støj fra omverdenen uden
at gå på kompromis med lydkvaliteten
2. Active Noise Cancellation (ANC))
• Tryk på Acve Noise Cancellaon knappen akverer ANC
• Når ANC er akveret, kan du minimere baggrundsstøj så du kan nyde din musik endnu mere
3. 3.5mm AUX
• 3.5 mm AUX jack indgang. Bruges l at lslue headseet enheder uden Bluetooth
• In-line brug kan også benyes hvis SACKit Touch 100 er løbet tør for strøm
4. Headband
• Justerbart headband som sikre en behagelig pasform l alle
5. Volume up/down
• Volume knapperne bruges l at justerer SACKit Touch 100’s afspilnings volumen
• Bruges også l at skie l næste eller forrige sang
6. X ButtonMaster function knap
• Tænder og slukker SACKit Touch 100
• I Bluetooth mode kan knappen bruges l at pause/afspille musik
• Kan bruges l at accepterer eller afvise indgående opkald
7. LED Charging Indicator
• Tænder når SACKit Touch 100 oplader
8. Charging port
• USB-indgang for opladningskablet

16
Sådan parrer du SACKit Touch 100 og din enhed
1. Til første brug: Hold X knappen i bund i 10 sekunder. Eer de første 5 sekunder hører du TÆND ly-
den. Bliv ved med at holde knappen i bund i endnu 5 sekunder for at sæe SACKit Touch 100 i pairing
lstand, som indikeres ved blinkende rød og blå LED lys
2. Tænd for Bluetooth på din enhed
3. Vælg “SACKit Touch 100” under Bluetooth indsllinger på din enhed. Dine headset er nu lkoblet din
enhed
4. Du kan nu starte musikken på din enhed
5. Hold X knappen i bund for at slukke SACKit Touch 100 igen
6. SACKit Touch 100 vil automask parre med sidst lkoblede enhed
For at lslue SACKit Touch 100 l en ny enhed skal du sikre dig at din dligere enheder er disconne-
cted og har slukket Bluetooth, ellers er headseet ikke søgbart
BESKRIVELSE AF PRODUKTET
Betjeningsvejledning efter første tilslutning
1. Eer første parring vil SACKit Touch 100 og din Bluetooth enhed automask forbinde
2. Tænd SACKit Touch 100 ved at holde X knappen i bund indl du hører TÆND lyden
3. Hold X knappen i bund for at slukke SACKit Touch 100
4. LED lyset vil blinke blåt, når SACKit Touch 100 er lsluet korrekt
Bemærk: Hvis du har problemer med at oprette forbindelse, sluk da venligst SACKit Touch 100 og prøv
at tilslutte igen.
Betjeningsvejledning til afspilning via kabel
Anvend det vedlagte jack kabel, når du ikke ønsker at benytte den trådløse Bluetooth forbindelse eller
når batteriniveauet er lavt. Det er muligt at anvende jack kablet til afspilning af lyd på SACKit Touch 100,
når batteriet er løbet tør for strøm.
In-line brug:
• Forbind 3.5mm skket l 3.5mm jack indgangen på din SACKit Touch 100 Headphone og 3.5mm
jack indgangen på din enhed
• Juster lydstyrken ved hjælp af betjeningspanelet på din enhed
• Nyd musikken
Bluetooth Multipoint
SACKit Touch 100 har Bluetooth Multipoint. Det betyder at op til to enheder kan kobles til headsettet
på en gang. Dette giver dig mulighed for for eksempel at forbinde headsettet til en computer og en
smartphone på samme tid. For at skifte mellem de to enheder sætter du bare musikken/lyden på pause på
den ene enhed og trykker på play på den anden. Hvis din telefon ringer vil SACKit Touch 100 automatisk
hoppe på telefonen.
Sådan opretter du forbindelse til en anden Bluetooth-enhed, når den første er tilsluttet:
1. Sluk SACKit Touch 100.
2. Hold X knappen i bund i 10 sekunder. Eer de første 5 sekunder hører du TÆND lyden. Bliv ved med
at holde knappen i bund i endnu 5 sekunder for at sæe SACKit Touch 100 i pairing lstand, som
indikeres ved blinkende rød og blå LED lys
3. Tænd for Bluetooth på din nye enhed du vil koble l
4. Vælg “SACKit Touch 100” under Bluetooth indsllinger på din enhed. Dit headset er nu også lkoblet
den nye enhed.

17
Sådan bruges Active Noise Cancellation funktionen
1. Tryk på ANC-knappen for at akvere Acve Noise Cancellaon. Når ANC er slået l, lyser LED’en
grønt og du kan nu nyde dit headset i Acve Noise Cancellaon mode
2. Når du ikke har behov for at benye denne funkon, slukker du for ANC ved at trykke på ANC-knap-
pen
3. Det er muligt at akvere og deakvere Acve Noice Cancellaon selv når SACKit Touch 100 headp-
hone er slukket. Acve Noice Cancellaon forbliver også tændt selv når du slukker din SACKit Touch
100 headphone
Batteri information
• Baeri: Genopladeligt Polymer Lithium-Ion Baery, DC: 3.7V/500mAh
• Spænding: USB DC5V, Anvend det vedlagte USB kabel l opladning af TSACKit Touch 100 Head-
phone
• Varighed af opladning: Inden du første gang tager SACKit Touch 100 Headphone i brug, skal du sikre
dig, at baeriet er fuldt opladt Ved første opladning skal baeriet oplades i mere end 4 mer. Here-
er tager en genopladning 2-3 mer
• SACKit Touch 100 Headphone er i opladningslstand, når indikaonslyset lyser rødt. Det røde lys
slukkes, når baeriet er fuldt opladt

18
Foretag opkald med SACKit Touch 100
Når SACKitTouch 100 forbindes meddin enhed kan du modtage og fortage opkald vires headsettet trådløst
Funkon Status for SACKit Touch 100 Betjening
Genopkald til seneste kaldte
nummer
Standby tilstand Dobbelt-tryk på X
knappen
Volume op Samtale tilstand Tryk på Volume+ knappen
Volume ned Samtale tilstand Tryk på Volume- knappen
Besvar opkald Ringer Tryk på X knappen
Afslut opkald Samtale tilstand Tryk på X knappen
Afvis opkald Ringer Hold X knappen i bund i 1 sekund,
indtil du hører indikationslyden
Overfør opkald mellem
SACKit Touch 100 og Bluetooth
enhed
Samtale tilstand Hold X knappen i bund i 3
sekunder for at overføre
samtalen fra SACKit Touch 100
Headphone til
mobiltelefonen. Hold herefter
MFB knappen i bund i 3 sekunder
for at overføre samtalen tilbage
fra telefonen til SACKit Touch
100 .
Bemærk: Ikke alle mobiltelefoner understøtter alle de listede funktioner. Gennemse venligst
brugermanualen til din mobiltelefon for mere information.
PRODUKT OPSÆTNING
Herunder følger en beskrivelse af hvordan produktet benyes, beskrivelsen gør brug af funkonerne
beskrevet på side 14 l 15.
Afspil musik med SACKit Touch 100
Når SACKit Touch 100 forbindes med en Bluetooth enhed, kan du nyde musik trådløst.
Funkon Status for SACKit Touch 100 Betjening
Pause Afspiller musik Tryk på X knappen
Afspil Pause Tryk på X knappen
Næste nummer Afspiller musik Tryk på volume(+) knappen
Forrige nummer Afspiller musik Tryk på volume(–) knappen
Volume + Afspiller musik Hold volume(+) knappen i bund
Volume - Afspiller musik Hold volume(–) knappen i bund

19
TROUBLESHOOTING
Hvis du harproblemermed at betjene din SACKitTouch 100, bedervi dig afprøve følgende løsninger. Hvis følgende
løsninger ikke ajælper dit problem, kan du kontakte vores kundeservice på inf[email protected]
Jeg oplever problemer med stabilitet og forbindelse på SACKit Touch 100
• Prøv at erne parringen imellem din enhed og SACKit Touch 100. Dee gøres på din enhed ved at
vælge Bluetooth indsllinger og vælge glem/slet ”SACKit Touch 100”. Hereer skal du igen parre
SACKit Touch 100 og din enhed ved at følge beskrivelsen på side 16
Mine SACKit Touch 100 afspiller ikke musik selv om at de er lsluet min enhed
• Tjek venligst lydstyrken på din enhed for at sikre, at den afspiller lyd.
• Ved brug af jack kablet l afspilning af lyd, tjek venligst at skket sidder korrekt i din enhed
• Hvis dine SACKit Touch 100 stadig ikke spiller når de er lsluet din enhed trådløst skal du manuelt
vælge SACKit Touch 100 som afspilningsenhed fra din enhed. For at gøre dee henviser vi l manualen
for din enhed eller den specikke app gør brug af
Jeg hører en bip-lyd i mine SACKit Touch 100
• Når SACKit Touch 100 laver en bip-lyd skal de oplades
Jeg følger ikke at SACKit Touch 100 sidder behageligt
• Du kan lpas længden af bøjlen ved at trække eller skubbe stængerne for at sikre et komfortabelt t
Jeg kan ikke tænde mit headset
• Dit SACKit Touch 100 headset kan være løbet tør for strøm. Prøv at lslue SACKit Touch 100 l en
oplader i minimum 4 mer før SACKit Touch 100 tages i brug igen

20
RENGØRING AF PRODUKTET
1. Sluk venligst SACKit Touch 100 før du rengør dit headset. Det er viggt at SACKit Touch 100 ikke er
lsluet en oplader under rengøring.
2. Anvend ikke ygge opløsningsmidler (såsom ethanol, kolofonium eller opløsningsmiddel) l at ren-
gøre med. Til rengøring af headsetet skal du bruge en blød let fugtet klud.
3. Under rengøringen skal du være opmærksom på at undgå vand i USB-indgange, højtalere, mikrofon
og knapper. Store mængder vand og væsker kan beskadige SACKit Touch 100
4. Brug en blød, tør og fnugfri klud l rengøring af højtalerstoet
ADVARSEL: Der må ikke benyes nogen form for skarpe genstande l rengøring af produktet
TEKNISKE SPECIFIKATIONER
• Model: SACKit Touch 100 Bluetooth and ANC headphones
• Bluetooth version: V5.0
• Operang distance: 10M
• Bluetooth Mulpoint
• Baeri: 500mAh
• Opladnings d: 3 hours
• Opladnings current: 220mA
• Musik spilled:
25 hours (bluetooth on, ANC o)
18 hours (Bluetooth on, ANC on)
• Opkaldsd: 25 hours
• ANC soluon: MAX
• Noise reducon performance: op l 22dB
• Frequency Range: 20Hz-20KHz
• Impedence:ANC_OFF:80Ω ANC_ON :110Ω
• Størrelse: 42*175*197mm
• Vægt: 197g