
3
2
PLEASE READ AND
SAVE THESE INSTRUCTIONS
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSON OR PROPERTY,
INCLUDING THE FOLLOWING:
■Read all instructions before using this
product.
■ Use this fan only as described in this
manual. Any other use not recommend-
ed by the manufacturer may cause fire,
electrical shock or injury to person or
property and may void the warranty.
■ Always unplug unit before assembly,
disassembly or cleaning.
■ Always unplug unit when not in use,
when moving from one location to
another and before cleaning.
■ To disconnect, grasp the plug and pull it
from the wall outlet. DO NOT unplug by
pulling on cord.
■ The use of attachments is not recom-
mended nor sold by the manufacturer
and may cause hazards.
■ Avoid contact with moving parts.
■ DO NOT operate any fan with a
damaged cord or plug, after a malfunc-
tion, or if dropped or damaged in any
manner.
■ DO NOT operate the fan in the presence
of explosive and/or flammable fumes.
■ DO NOT place the fan or any parts near
an open flame, cooking or other heating
appliances.
■ Extreme caution is necessary when fan is
used by or near children and whenever
the fan is left operating and unattended.
■ This product is intended for household
use only and not for commercial or
industrial use.
■ DO NOT use outdoors.
■ Always use on a dry, level surface.
■ DO NOT operate if the fan housing is
removed or damaged.
■ A loose fit between the AC outlet and
plug may cause overheating of the plug;
consult a qualified electrician.
■ DO NOT run cord under carpeting. DO
NOT cover cord with throw rugs, runners,
or the like. Arrange cord away from
trac areas and where it will not be
tripped over.
■ This product employs overload protection
(fuse). A tripped fuse indicates an
overload or short-circuit situation. If the
fuse trips, unplug the product from the
outlet. Replace the fuse as per the user
servicing instructions. If the replacement
fuse blows, the product should be
discarded or returned to an authorized
service facility for examination or repair.
■ DO NOT connect the fan to any power
sources other than a 120V alternating
current polarized outlet. - Turns fan on/of
LO - Fan speed low
MED - Fan speed medium
HI - Fan speed high
- Oscillang Selecon: Starts
and stops the oscillaon of
the fan.
NOTICE:
1. When you replace the fuse, DO NOT force the slide suddenly or overexert to reduce the
risk of damage.
2. If you experience diculty replacing the fuse, contact a qualified electrician to help.
3. Make sure fuse access cover is closed.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
3
■POLARIZED PLUG: This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug and try again. It if still
does not fit, contact a qualified electrician. DO NOT attempt to change this safety feature.
■WARNING: To reduce the risk of electric shock, DO NOT use this fan with any
solid-state speed control and DO NOT insert finger or any object into grill.
USER SERVICING INSTRUCTIONS
A. To disconnect, grasp the plug and pull it from the wall outlet.
DO NOT unplug by pulling on cord.
B. Open fuse cover. To open, slide cover towards the blades. (See Fig. 1)
C. Remove the fuse carefully, making sure not to break the fuse. (See Fig. 2)
D. Risk of fire. Replace fuse only with a 5A, 125V fuse.
E. Close fuse cover. Slide close the fuse access cover on top of plug. (See Fig. 3)
The fan plug uses a 5 amp fuse.
In the event of loss of power please check the fuse located within the plug. A spare fuse is
provided. it is located on the back of the plug. Please see Fig.4 and Fig 5. above to access
and install the spare fuse.
SPARE
FUSE
5.0A MAX
FUSE
SPAR E FUSE
5.0A MAX
Spare fuse on
back of plug.