Black Stone 5015 User manual

36" GIDE
WN GAD
MODEL 5015
ILLUSTRATED PARTS LIST
1. Long Wind Guard (2 pc)
Protector de Viento Largo
Grand Pare-Vent
2. Short Wind Guard (2 pc)
Protector de Viento Corto
Protège-Vent Court
North Atlantic Imports, LLC |513 West 2500 North, North Logan UT 84341 |BlackstoneProducts.com

INSTRUCCIONES DE USO |MODE D’EMPLOI
For questions regarding your BLACKSTONE PRODUCT, or if in need of replacement parts, you can call 435-252-3030
or send us an email at [e-mail].
We’re pleased to help you with any questions concerning replacement parts or your warranty. Our customer service sta
can be reached Monday through Friday from 9:00 am to 5:00 pm Mountain Standard Time. If all operators are busy or
you reach us after hours, you may leave a message, and your call will promptly be returned.
INSTRUCTIONS FOR USE
STEP 1
Place the 2 short wind guards on the back of the
griddle top making sure the wind guards don’t
cover the rear grease cutout.
Coloque las 2 protecciones contra el viento cor-
tas en la parte posterior de la plancha, asegurán-
dose de que las protecciones contra el viento no
cubran el recorte de grasa posterior.
Placez les deux protège-vent courts à l’arrière du
dessus de la plaque chauante en vous assurant
que les pare-vent ne recouvrent pas la découpe
de la graisse arrière..
STEP 2
Place the 2 long wind guards on the left and right
side of the griddle as shown in the illustrations.
Coloque los 2 protectores de viento largos en el
lado izquierdo y derecho de la plancha como se
muestra en las ilustraciones.
Placez les 2 longues protections contre le vent
sur les côtés gauche et droit de la plaque comme
indiqué sur les illustrations.
Long
Largo | Grand
Short
Corto | Court