Blaupunkt Arizona CM148 User manual

2

Dispiay
The display consists of three fields and changes according to the operating mode and function.
Display field 1:
Radio mode
Memory banks and wavebands
Brief indication of preset station (e.g. Pl)
Cassette mode
CAS - cassette inserted
Chanaer mode (Chanaer sold separately)
Current track
Numeric and graphic representation of the
volume and audio settings.
Indicates DSC mode is active.
Graphic representation of the adjusted
volume level.
.“‘-*%w:w\ y_. lj i \a,*”
Display field 2:
Radio mode
Radio frequency or station name
Clock display
Cassette mode
TAPEl/TAPE2 - side of tape being played.
Displays active function.
Clock display
Chanaer mode (Chanaer sold seoaratelv)
CD number being played by changer.
CD time (elapsed time)
Brief indication of functional changes
Clock display
Serves as display and entry field during DSC
programming
Miscellaneous
indicates new source (e.g. when changing
from radio to cassette)
Display field 3:
Displays active functions.
CT,
- Stereo
- Cassette inserted
Disc
- CD changer connected
E - Loudness
Radio mode
lo
- Seek tuning sensitivity
Chanaer mode (Changer sold separately)
RPT - Repeat function
MIX - Tracks played at random
3

c- Contents
Display
............................................
3
Quick reference
..............................
5
Important notes
.............................. 8
What you need
to
know ..........................
8
Traffic safety ........................................... 8
Installation .
..............................................
8
Accessories ............................................
8
Warning note
..........................................
8
Detachable face
.............................
8
Theft protection ....................................... 8
Affixing the detachable face ...................
9
Selecting the audio
source.. ......... 9
Radio
operation ....................................
IO
Selecting a waveband ..........................
10
Station tuning........................................ 10
Automatic seek tuning A/V
.............. 10
Manual tuning with <c
>>
..................
10
Switching between the
memory banks (FM) ............................. 10
Storing stations..................................... IO
Recalling stored stations ......................
IO’
Scanning stations with Preset Scan..
... 11
Scanning stations with Radio Scan..
.... 11
Changing the scan time.. ......................
11
4
Automatically storing the
strongest stations with Travelstore..
.....
11
Naming radio stations ........................... 11
Deleting radio station names ................
12
Deleting a radio station name
........... 12
Deleting all of the radio station names1 2
Setting the TIMER ................................ 13
Cassette deck operation
............. 13
Cassette playback ................................
13
Cassette eject .......................................
13
Fast winding..........................................
13
Reversing the tape ...............................
13
CD changer operation (optional) 14
Inserting a
CD.......................................
14
Switching to the CD changer mode
...... 14
Ejecting a CD........................................
14
CD
playback .........................................
14
Selecting aCD......................................
14
Selecting a
track ...................................
14
SCAN
....................................................
15
RPT
.......................................................
15
MIX........................................................
15
CLOCK/Display changes..
........... 15
Setting the clock ................................... 16
Turn On
Message.. .......................
16
DSC programming
.......................
16
Overview of the DSC factory settings . . 18
Appendix .......................................
18
Specifications.. ......................................
18
Amplifier ............................................
18
Tuner .................................................
18
Cassette ............................................
18
CD changer (sold separately)
........... 18
Troubleshooting Guide
...............
19
General ................................................. 19
Radio reception ....................................
19
CD Changer operation..........................
19
Error Displays .......................................
20

Quick reference
@ REL
To release the detachable face, press
this knob and remove the
detachable face.
@ ON - Power up/down
Press this button to turn the unit on. It
will play at the volume set under DSC.
Mute: If you press this button briefly
during radio reception, the volume will
turn down instantly.
This function is cancelled by pressing
the ON button again. You can
programme the mute volume (refer to
“DSC programming”).
Press the button for about 1 second to
turn the unit off.
Switching on/off via the ignition:
If the unit has been connected
correspondingly, it can also be turned
on and off with the vehicle ignition.
If ON is pressed while no power is
being supplied to the red (ignition)
lead, the unit will automatically turn off
after one hour. This prevents the
battery from going dead.
@Volume knob
Turn the knob to set the volume.
@ P Eject
Press this button to eject the cassette.
The cassette buttons will retract.
@ Cassette slot
Insert the tape into the slot with the
open side showing to the right. The
tape will be played in the direction
previously selected.
@ Display
Displays all settings, operating modes
and functions.
@ FR Fast Rewind
To fast rewind the tape.
@ FF Fast Forward
To fast forward the tape.
@ + @) Reversing the tape (PROG)
Press both buttons simultaneously.
@ Rocker switch
Radio mode
AI V Seek tuning
A
UP
VDown
cc I z-> Manual tuning
.<<
Up in short intervals
>>
Down in short intervals
Changer mode (optional)
Select CD
A UP
V Down
Select track
>> Up: press briefly
CUE - fast forward (audible): hold
button down.
c< Down: press two or more times
briefly
Repeat track: press briefly.
REVIEW -fast reverse (audible):
hold button down.
Extra function of rocker switch:
The rocker is also used in these
modes
AUD mode 11
8
DSC mode 12
Requirement: The respective function
must be activated.
5

@ SRC
(SRC = audio source)
Press button briefly to select the
operating mode (tuner, cassette,
changer or Aux-in). The active mode
appears in the display.
0
11 AUD
You can store different treble and bass
settings for the FM, AM, cassette and
CD changer or Aux-in modes.
Setting the tone:
Select the audio mode. Press AUD
once and set the tone using the rocker
switch.
Treble:
A Treble +
V
Treble -
Bass:
c< Bass-
>>
Bass +
Press AUD twice and set the fader and
the balance using the rocker switch.
AFader front
VFader rear
,
x-z Balance left
>> Balance right
The selected values will appear in the
display. The last setting is stored
automatically.
6
Switching AUD off
Press button briefly.
If you do not change the tone within
8 sec., the AUD mode will quit
automatically.
Extra function: LD
Loudness boosts the bass frequency
at low volume.
Press AUD longer than 2 seconds to
change the Loudness setting. “LD” will
appear.
The loudness level is set under DSC.
@ DSC Direct Software Control
Adjusts programmable settings.
Refer to “DSC programming”.
@ (9 DIS -clock display
This unit is equipped with an internal
clock.
priorityDisplay
To alter the display priority, press (9
until you hear a beep. Repeat this
procedure until the desired display
appears.
Temporary display change
Press 0 briefly as many times as
needed to show the desired
information for a few seconds.
Radio mode
Press this button to switch between the
clock, the station name and the
frequency.
Cassette mode
Press this button to switch between the
track played and the clock.
Chanaer mode (optional)
Press this button to switch the display
of the CD number, the playback time
elapsed and the clock.
@ Preset buttons 1 to 6
Radio mode
You can store six stations in each FM
memory bank (1,2, and ‘7”).
On AM you can store six stations.
Store station -hold down a preset
button in radio mode until a beep is
emitted.
Recall station - select a waveband
and also the memory bank on FM;
press the relevant preset button briefly.
The selected preset button will briefly
appear in display field 1 (e.g. Pl).

Changer mode (optional)
3/W - Pause
interrupts CD play. “PAUSE” appears.
Press button again to restart CD play.
4lRPT
Repeat track: press 4IRPT. “REPEAT-
T” appears briefly. The track will be
repeated until WRPT is pressed again.
Repeat CD: select “REPEAT-D”.
Switch REPEAT-D on:
lHold URPT down until a beep is
emitted.
5/MIX
“MIX CD” plays the tracks of one CD in
random order.
“MIX ALL” plays the tracks of all CDs
of one changer magazine in random
order (as determind by the changer
model).
To turn MIX on/off:
Press 5/MIX briefly.
The current setting is briefly indicated
in the display: “MIX-CD”.
Switch MIX-ALL on:
lHold 5/MIX down until a beep is
emitted.
@ BAITS
Switches between the wavebands/
memory -~-
(Travelstore, ark WI.
banks FMl, FMZ, FMT
^_^\ ^^^I AL.
Changer mode (optional)
F
‘ress SCA.
“SCAN” will be displayed. All tracks of
the CD will be scanned.
Extra function: Travelstore
,
To store the six most powerful FM or
AM stations in the Travelstore bank:
Select FM or AM by pressing BAITS.
Press BAITS until a beep sounds and
“T-STORE” appears.
@ PS - Preset Scan
Press PS briefly. All currently-
receivable stored stations will be
scanned.
To stop Preset Scan, press PS again.
(Use DSC to set the Scantime.)
@ SCA
Press SCA to select the SCAN
function. Use DSC programming to set
the scantime.
Press SCA to stop SCAN function.
Radio mode
Press SCA.
The radio will scan all receivable FM or
AM stations. “SCAN” and the station
appear on the display on after another.
7

Important notes
What you need to know
Before using your new car radio, please read
through the following information carefully.
Traffic safety
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times.
Never use your car radio in a way that could
distract you.
Please keep in mind that you travel a
distance of 15 yards per second at a speed
of only 30 mph.
Should the traffic situation become
particularly demanding, we advise you not
to use the radio.
Always make sure that you are still able to
hear any warning signals coming from
outside the vehicle, such as police or fire
engine sirens, so that you can react
accordingly.
Consequently, you should always select a
moderate volume for playing your car radio
while you are driving.
Installation
.
If you would like to install your new car radio
yourself or add other audio components to
existing ones, please read the enclosed
8
instructions on installation and connection
carefully.
In order to ensure that the unit operates
properly the positive power supply line must
be connected via the ignition and the
permanent +I 2 V lead.
Do not ground the loudspeaker outputs!
Accessories
Use Blaupunkt-approved accessories and
spare parts only.
Changer
(not included with the unit, sold separately)
CDC-A08
CDGA071
CDC-A05 (with adapter only)
A
! Warning note
Danger of damaging the automatic
power antenna in a car wash
Before you drive into a car wash
l switch the radio off by pressing the ON
button.
The power antenna will retract, if it
doesn’t, press ON again.
Do not drive into the car wash unless the
power antenna has retracted!
Detachable face
Theft protection
This unit is equipped with a detachable face.
A car radio without face is worthless for
thieves.
Protect your car radio and detach the face
when you leave your car. It is very easy to
attach and detach the detachable face.
Note:
Do not pull the detachable face straight out
from the chassis, but detach it as illustrated
below. Be sure not to drop the panel.
Do not expose the detachable face to direct
sunlight or other heat sources.
Do not leave it in a humid place.
Detaching the detachable face
Press the REL button to release the control
panel. Then pull it off gently as illustrated.

If the unit was still in operation, it will turn
off now. All current settings remain stored.
If a cassette is inserted, it will be kept in the
unit.
The radio will turn on automatically when
you attach the detachable face again.
Attaching the detachable face
Slide the panel (6) from the left to the guide
of the chassis (A). Gently push the left side
of the panel against the front of the chassis
until it snaps into place.
Affixing the detachable face
If you wish to fix the detachable face
permanently to the chassis, screw down the
enclosed bolt at the left hand side of the
chassis into the hole (C), see Fig.
Selecting the audio source
Use the SRC (source) button to select
between radio, cassette and CD or Aux-in
mode.
The CD mode is not available unless a CD
changer is connected.
The Aux-in mode is available if a changer is
not connected. (See DSC programming.)
To select the operating mode:
l Press SRC.

Radio operation
Selecting a waveband
With this car radio you can select between
the following wavebands:
FM 87.5 - 107.9 MHz
AM 530 - 1710 kHz
lSelect the desired waveband by
pressing the BAITS button.
Station tuning
Automatic seek tuning NV
lPress A or V; the car radio will
automatically search for the next
station.
If you hold A/V pressed up or down on the
rocker switch, seek tuning will speed up in
the upwards or downwards direction.
Automatic seek tuning
A
UP
VDown
.
Manual tuning with << >>
You can also tune into a station manually.
lPress << >z-; the frequency will change
in short intervals in the downwards or
upwards direction.
If you hold << >> pressed to the left or the
right on the rocker switch, the frequency
scan will speed up.
Switching between the memory
banks (FM)
You can switch between the memory banks
FM1 , FM2 and FMT in order to store stations
and recall them later.
The currently selected memory bank
appears in the display.
lPress the BA/TS button as many times
as necessary until the desired memory
bank lights up in the display.
Storing stations
On FM, you can store six stations on the
preset buttons 1,2,3,4,5,6 for each of the
memory banks (FMI, FM2, FMT).
You can also store six stations on AM.
l Select the waveband by pressing
BAITS.
l Tune into a station with the rocker
switch (either automatically A/V or
manually CC 2~).
lPress the desired preset button until
the radio resumes play after the
muting (takes approximately 2
seconds) or until you hear a beep.
Now the station has been stored.
The display will temporarily indicate which
preset button is currently activated.
Recalling stored stations
You can recall any stored station at the touch
of a button.
lSelect the waveband by pressing
BMS. For FM, also choose the
corresponding memory bank by
pressing the BA/TS button as many
times as necessary until the desired
bank appears in the display.
lPress the corresponding preset button
briefly to recall the station.
10

Scanning stations with
Preset Scan
You can scan all of the radio stations on AM
or FM.
The scanned stations of the current
waveband will appear briefly one after the
other in the display.
Start Preset Scan:
l Press PS briefly.
“PS-Scan” and the station name or
frequency will appear alternately in the
display. The abbreviation for the station
currently playing (e.g. Pl) will flash in display
field 1
Listen to scanned station/end Preset
Scan:
l Press PS briefly.
Scanning stations with
Radio Scan
You can scan through all of the stations in
your reception area.
To start the Scan function:
l Press SCA briefly.
The scanned frequency or the station name
will start flashing in the display.
During the actual scanning process “SCAN”
will appear in the display.
Listen to scanned station/end Radio
Scan:
l Press SCA briefly.
Changing the scan time
The scan time can be selected from between
5 to a maximum of 20 seconds.
If you would like to alter the scan time,
please refer to the section on “DSC
programming - SCANTIME”.
Selecting the automatic tuning
sensitivity
You can alter the automatic tuning
sensitivity.
If “lo” is displayed, the radio will only pick up
strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also
pick up weaker, more distant stations (high
sensitivity).
If you would like to alter the sensitivity level
please refer to the section on “DSC
programming - SENS”.
Automatically storing the
strongest stations with
Travelstore
You can automatically store the six FM /AM
stations with the most powerful signals in
your current reception area sorted according
to their signal strength. This function is
particularly convenient on longer trips.
Press the BAITS button to select the
waveband.
lPress the BMS button for 2 seconds.
“T-STORE” will appear in the display.
The six strongest FM stations will be
automatically stored in the “FMT” memory
bank (Travelstore).
If the AM band is active, the six strongest
AM stations will be automatically stored in
the AM memory bank.
When this process has been completed, the
radio will play the strongest station.
If desired, stations can also be stored
manually in the Travelstore bank (see
“Storing stations”).
Naming radio stations
To enable you to pick out your favorite radio
station more quickly, DSC programming
allows you to give up to 30 radio stations
individual names.
11

The radio station does not have to be stored
in the memory bank. The names are linked
to the radio frequencies.
Proceed as follows:
Select the DSC mode.
l Press DSC.
lPress A
I v to select STA-NAME.
lPress
c-z >> to switch to the station-
select mode.
lPress A
Iv to select the station you
would like to name.
lPress <c
>> to confirm your selection.
lNow you are in the edit mode. If the
station selected does not have a
name, 8 dashes I‘_” will appear in the
display.
lThe cursor will flash at the current
position. Press <c >> to move the
cursor.
lPress
A / v to select a character. If you
want to enter a blank, select the dash
II ,,
_.
lPress DSC to store the name. Press
DSC again to quit the DSC mode or ’
press << >> to re-enter the station-
select mode.
If you want to change the name, select the
name in the DSC mode and overwrite it in
the edit mode.
12
If you want to change just a few of the letters,
Deleting all of the radio station names
press << >> to move the cursor to the Select the DSC mode
corresponding position and change only that _
character. .
Deleting radio station names
.
Deleting a radio station name
Select the DSC mode. .
Press DSC.
Press DSC. .
Press A / v to select STA-NAME.
Press <c >> to enter the station select
mode.
Press A /v to select the name you
want to delete.
l
Press and hold down DSC.
“ONE NAME” will appear in the
display.
Release the DSC button after
2 seconds but before 8 seconds.
“DELETED” will appear in the display.
The station name has been deleted.
The unit will switch back to DSC mode.
Press A / v to select STA-NAME.
Press <c z=> to enter the station select
mode.
Press and hold down DSC for
8 seconds.
After 2 seconds and 8 seconds you will
hear a beep. “ONE NAME” will appear
first in the display, followed by
“ALLNAMES”
Release DSC. “DELETED” will appear
in the display. All of the station names
have been deleted. The unit will switch
back to DSC mode.

Setting the TIMER
Using this unit it is possible to conveniently
switch on any two radio stations you select
at any time you select. The radio stations
can be selected independently of the
currently active operating mode.
Proceed as follows:
Select the radio station of your choice.
Press DSC.
Press h/v to select TIMER 1.
Press >> to turn the TIMER on. (Press
<< to turn the TIMER off.).
Press >> again to select time display.
The minutes will flash.
Press A / v to set the minutes.
Press << to activate the hours.
Press A / v to set the hours.
Press DSC to store your entry. You
have now set TIMER 1.
If you would like to set TIMER 2 as well,
repeat the steps as described above.
Note
The timers can be turned on and off while
any audio source is in use.
Cassette deck operation-
Cassette playback Reversing the tape
Insert the tape into the slot with the open
To change the tape direction during cassette
side showing to the right. playback:
The cassette playback will start. If a tape is lPress
FR/FF simultaneously.
already inserted, press SRC to select the Tke display shows
“TAPEl”,or “TAPE2” for
tape deck mode. “TAPEl” or “TAPE2 will the selected tape side.
appear. The tape will be played in the
direction previously selected.
Cassette eject
Press Pto eject the cassette. The cassette
buttons will automatically retract.
Fast winding
Press the FF or FR button to fast forward or
rewind the tape during cassette operation:
“FORWARD” or “REWIND” will light up in
the display.
When the end of the tape is reached with
fast forward, the tape direction will change
and the other side of the tape will played.
With “Radio Monitor ON” during fast winding
you can listen to the radio program you
selected previously. It is possible to change
the Radio Monitor on/off setting in the DSC
mode. (Refer to “DSC programming - RM”.)
13

CD changer operation (optional)
This unit offers you the ability to conveniently
control a Blaupunkt CDC-A08 or CDC-A071
changer (or CDC-A05 with a special
adapter), all sold separately.
If a CD changer is connected, the c%%
symbol will light up in the display.
The changer is equipped with a magazine
for 10 discs.
Inserting a CD
Insert one or several CDs into the magazine
(printed surface facing up).
Slide the magazine into the CD changer in
the direction of the arrow.
The CDs are counted from bottom to top.
Note:
Use only perfectly circular CDs with a
diameter of 12 cm!
CDs with a diameter of 8 cm or CDs manu-
factured in the shape of a mug, for example,
are not suitable for use with this equipment.
Using such CDs can very likely result in the
destruction of the CD and the CD drive. t
We assume no responsibility for damages
caused by using unsuitable CDs.
After you have inserted the magazine, keep
the door of the magazine closed to prevent
contamination.
14
Switching to the CD changer
mode
Make sure that at least one CD has been
inserted into the magazine.
Press SRC to change the audio source:
lPress SRC repeatedly until the CD
functions appear in the display.
Ejecting a CD
Open the door of the CD changer and press
the eject button.
CD playback
Press SIX to select the CD changer.
lPress SRC repeatedly until
“CHANGER” appears in the display.
CD playback starts with the first CD
identified by the changer.
Selecting a CD
When CD playback starts, all active CD
functions and the CD number will light up in
the display.
To change the display between CD number
and elapsed time, press 0 during CD
playback.
h Iv CD selection
A UP
V Down
The CD number being played will appear
in the display.
Selecting a track
>> Up: Press briefly.
CUE - fast advance (audible):
Hold button down.
<<
Down: Press two or more times briefly.
To re-start a track: Press briefly.
(When at start of first track, unit goes to
last track on same disc.)
REVIEW - fast reverse (audible):
Hold button down.
Press the button repeatedly to skip several
tracks.
The number of the selected track will appear
beside “T” (track).

SCAN
Use this function to scan all of the CD tracks.
To start the Scan function:
lHold down SCA until “SCAN” appears.
All of the CD tracks will be scanned one after
the other in ascending order.
To stop the Scan function:
l Press SCA briefly.
The track currently scanned will continue to
play.
The SCAN function will also be cancelled
by pressing any other button, except for the
volume controls and the AUD and ON
buttons.
RPT
CD tracks can be played repeatedly.
The following options are possible:
- Repeat the current track (“REPEAT-T”)
or
- Repeat the CD, i.e. all tracks of the
current disc (“REPEAT-D”).
“RPT” will appear in display field 3 as long
as RPT is active.
“REPEAT-T” lights up briefly in display
field 2 when you activate this function and
each time the track changes.
Switch REPEAT-T on:
l Press WRPT briefly.
Switch REPEAT-D on:
lHold 4/RPT down until a beep is
emitted.
MIX
You can have the CD tracks played in
random order.
The following options are possible:
- Mix all tracks of one CD (“MIX-CD”)
or
- Mix all tracks of all CDs (“MIX-ALL”) in
manner determined by the CD changer
model.
“MIX” will appear in display field 3 as long
as the MIX function is active.
“MIX-CD” lights up briefly in display field 2
when you activate this function and each
time the track changes.
Switch MIX-CD on:
l Press 5/MIX briefly.
Switch MIX-ALL on:
lHold 5/MIX down until a beep is
emitted.
CLOCK/Display changes
This unit is equipped with an internal clock.
Disolay priority
To alter the display priority, press until
you hear a beep. Repeat this procedure until
the desired display appears.
Temporary display chanae
Press
’ briefly as many times as needed
to show the desired information for a few
seconds.
Radio mode
Press to switch between the clock, the
station name and the frequency.
Cassette mode
Press
1 to switch between the track played
and the clock.
Changer mode (optional)
Press to switch the display of the CD
number, the playback time elapsed and the
clock.
15

Setting the clock
Turn On Message
This unit offers you the possibility to enter a
Set the clock in the DSC mode.
l Press DSC briefly.
turn on message of up to 40 characters. The
message will briefly appear in the display
each time you turn the unit on.
lPress A
I v to select the function Proceed as follows:
“CLOCKSEP.
l Press -z-z >> to activate the hours or Select the DSC mode.
_
-
the minutes. The option you can set
will flash. .
lPress
A/V to alter the flashing .
display. .
lWhen you have completed the setting,
press DSC briefly to store it. .
lPress DSC again to exit DSC mode. .
Press DSC.
.
.
Press A / v to select TOM.
Press c< to turn the message off.
Press >> two times to select the edit
mode.
If there is no TOM programmed,
dashes “_I’
will appear in the display.
The cursor will flash at the current
position. Press c< / >> to move the
cursor.
Press A / v to select a character. If you
want to enter a blank, select the dash
I, I,
_.
Press DSC to store the message.
Press DSC again to quit the DSC
mode.
If you want to change the message, select
L
TOM in the DSC mode and overwrite it in
the edit mode. If you want to change just a
few of the letters, press cc I >> to move the
cursor to the corresponding position and
change that character only.
DSC programming
The car radio has been equipped with DSC
(Direct Software Control) to allow you to
customize certain programmable, basic
settings to suit your personal needs and
preferences and then store them.
The basic settings for this car radio were
made at the factory.
In the following you can find an overview of
these settings, so that you can always reset
to them if desired.
If you wish to alter any of the programming,
l press DSC.
MENU v / A will temporarily appear in the
display.
Use the A I v buttons of the rocker switch
to select the function you wish to change.
The display will show you the setting you
have selected. Press the << z=> buttons of
the rocker switch to change the settings and
exit the current mode. Confirm the setting
you have selected by pressing the DSC
button.
A / V Select function
C-Z >> Adpst/recall setting
16

LOUDNESS
SENS LO
STA NAME
CLOCK 12
Loudness boosts the bass
frequencies at low volume.
LOUD 1 - Low boost
LOUD 6 - Max. boost
To adjust the seek tuning
sensitivity.
“LO” stands for local
reception.
“DX” stands for distant
reception.
TIMER 2 You can also program the
unit to go to a second
station at a programmed
time.
ON VOL To set the turn-on volume.
Press <c >> to adjust the
turn-on volume as desired.
TOM ON/OFF Turn-on message.
Allows you to name up to 30
radio stations based on their
frequency.
To switch between 12 and
24-hour clock display.
MUTE
BEEP
CLOCKSET To set the clock.
Press << >> to select hours/
minutes. Press v / h to
adjust the flashing value. RM ON/OFF
TIMER 1 The radio will automatically
switch to a station you have
selected at the time you
program.
You can enter a message of
up to 40 characters which
appears in the display when
you switch the unit on.
To change the mute volume.
To change the volume of the
acknowledgement tone
(beep) between 0 and 9.
(0 = off)
Radio Monitor
If the Radio Monitor function
is active during fast winding
of the tape, the unit will
switch to the radio and play
the station previously
SCANTIME Use this function to set the
scan time for the radio or
CD changer from 5 to 20
seconds.
AUX
.
Select AUX-ON if you wish
to connect a portable CD or
tape player instead of the
CD changer. Contact your
dealer for more information
about the required adapter
cable (7 607 897 093),
which is sold separately.
DISPLAY Display indications on or off
with the car radio turned off.
17

Appendix
Overview of the DSC factory
settings
LOUDNESS
SENS
CLOCKTYPE
CLOCKSET
ON VOL
MUTE
BEEP
RM
SCANTIME
AUX
DIS
18
3
DX
CLOCK 12
20
IO
3
OFF
10 sec.
OFF
ON
Specifications
Amplifier
Power output and total harmonic
distortion:
17 watts per channel minimum continuous
average output into 4 ohms. 4 channels
driven from 30-I 5000 Hz with no more
than 1% total harmonic distortion.
4 x 40 Watts max. power.
Tuner
Wavebands:
FM :
87.5 - 107.9 MHz
AM :
530 - 1710 kHz
FM frequency response:
35-16000Hz
Cassette
Frequency response:
35-16000Hz
CD changer (sold separately)
CDC-A071
CDC-A08
CDC-A05 (with special adapter cable)
Frequency response:
20 - 20000 Hz
Features and specifications subject to
change without notice.

Troubleshooting Guide
The following check will assist in the correction of most problems which you may encounter with your unit. Before going through the
check list below, refer back to the connection and operating procedures.
General
Trouble
No sound.
Radio reception
Cause/Solution
3
l Adjust the volume with the volume knob.
l With a two-speaker system, set the fader control to the center position.
Trouble
Preset stations are not receivable.
Automatic tuning is not possible.
Travelstore feature does not complete
storing of six stations.
Cause/Solution
l The broadcast is too weak.
l The broadcast is too weak - Use manual tuning.
l Not enough broadcast frequencies are receivable.
Also make sure that antenna is connected, extended and dry inside.
CD Changer operation
Trouble
CD does not start.
The disk cannot be loaded or is
automatically ejected.
The sound skips due to vibration.
Cause/Solution
l Dusty or defective disc.
l The ambient temperature is more then 50” C (120” F).
l The disc is inserted with the printed side downwards.
l The changer is installed at an angle of more than 20”.
l The changer is not installed on the sturdy part of a car.
l Dusty or defective disc.
19

Error Displays
Trouble
“CD ERR”
“NO DISC”
Cause Solution
A disc such as an upside down or dirty Insert the disc correctly.
disk, or a CD-ROM (computer) disc. Clean the disc.
No magazine or disc in changer Take out the magazine and insert the disc.
If the above mentioned solutions do not help to improve the situation, consult your nearest Blaupunkt dealer or in
the United States call l-800-266-2528.
20