Blaupunkt FRANKFURT 100 User manual

CAR RADIO
FRANKFURT 100
Operating and Installation Instructions

CAUTIONS
Use only a dry or slightly moistened cloth for
cleaning the car sound system.
If necessary, clean the contacts of the control
panel regularly using a soft cloth moistened
with cleaning alcohol.
Do not dispose of your old
unit in the household trash!
1 Car radio
1 Operating & installation instructions
1 Remote control (incl. battery)
1 Connecting cable chamber A
1 Connecting cable chamber B
1 Installation kits
2 Removal key
CLEANING NOTES
Solvents, cleaning and scouring agents as well
as dashboard spray & plastics care product may
contain ingredients that will damage the
surface of the car sound system.
•
•
DISPOSAL NOTES
Use the return and collection systems available
to dispose of the old device.
SCOPE OF DELIVERY
The scope of delivery includes:
PLACING THE DEVICE IN OPERATION
Caution!
Vehicle screws
Ensure vehicle screws are removed before
installation. (See "Installation” instructions).
DAMAGE CONTROL
Do not drop control panel. Protect the control
panel during transportation to avoid
encountering with impacts and dirt.
Do not expose the control panel to direct
sunlight or high temperature. Avoid direct
contact with the control panel’s electrical parts.
NOTE
The car sound system will automatically turn
o as soon as the control panel is removed.
DISCLAIMER
In no events shall Blaupunkt be liable for any
direct, indirect, punitive, incidental, special
consequential damages, to property of life,
improper storage, whatsoever arising out of or
connected with the use or misuse of our products.
USA & CANADA : Products not intended for sales
in the United States and Canada. If purchased
in the U.S. or Canada, this product is purchases
as-is. No warranty, express or implied is provided
in the U.S. and Canada.
1

1 3 5 7
2 4 6
810 12 14 16 18
911 13 15 17 19
STRUCTURE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
VOLUME/MODE
Turn knob left or right to increase/decrease
volume or press continuously to select
FLAT/POP/ROCK/CLASS/BASS/TRE/BAL/FAD
BND/AMS
Radio mode : Press to change radio band
(18FM) or press & hold to preset button 1~6
with auto memory stations.
USB/SD mode : Press into song to select
mode, turn VOLUME knob to select song
and press VOLUME knob to start playing.
Power/MUTE
Press to mute sound output, press & hold to
power on/o
LCD SCREEN DISPLAY
I<<
Radio mode : Press to auto seek down or
press & hold for manual seek down
USB/SD mode : Press to return to previous
song or press & hold to Fast Rewind
EQ : Equalizer
IR SENSOR
USB PORT
RESET
MOD/CLK
Press to select mode of media
RADIO-USB-SD-AUXIN or press & hold for
clock
1/>II
Radio mode : Press & hold to preset stations
USB/SD mode : Function as PAUSE/PLAY
button
12.
13.
14.
15.
16.
17.
18.
19.
2/INT
Radio mode : Press & hold to preset stations
USB/SD mode : Function as introduction,
playback each song for 10seconds
3/RPT
Radio mode : Press & hold to preset stations
USB/SD mode : Function as repeat, repeat
current song playback
4/RDM
Radio mode : Press & hold to preset stations
USB/SD mode : Function as random, playback
song in shue mode
5/-10
Radio mode : Press & hold to preset stations
USB/SD mode : Press to playback previous
10th song or press & hold to return to
previous folder
6/+10
Radio mode : Press & hold to preset stations
USB/SD mode : Press to skip to 10th song or
press & hold to skip to next folder
>>I
Radio mode : Press for auto seek up or press
& hold for manual seek up
USB/SD mode : Press to skip to next 10th
song or press & hold to Fast Forward
SD SLOT
AUX-IN PORT
2

STRUCTURE
FEATURE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Select mode of media
Power : On / O
Select stations band
Return to previous / fast rewind
Select equalizer
Pause / play
Introduction / song preview (USB/SD)
Repeat song
Random / shue play
Return to 10th song / previous folder
Skip to 10th song / next folder
Press & hold to adjust clock setting
Volume down
Skip to next / fast forward
Select Treble/Bass/Fader/Balance
Press & hold to search stations
Volume up
Mute
1
2
3
4
5
8
6
7
10
9
11
12
13
14
15
16
17
18
Media Playback
• MP3/WMA/WAV Playback
• USB 2.0 / SD Playback
• SDHC (Support up to 32GB)
• Front Aux input
• Repeat (Disc/Title)
Accessories
• Remote control
Display
• White Display Key with LED Backlight
• Fixed Panel
Audio
• 4 x 40W Built-in amplier
• RCA Rear Preout
• Auto Equalizer
Tuner
• Menu/ID3 Tag
• 18 FM Preset Station
• Local Seek Tuning
3

OPERATION
General
Power supply : 13.8V DC
Load impedance : 4 ohms
Max. output power : 4 x 40W
Tone control : ±8dB (bas 100Hz, treble 10KHz)
USB
Signal-to-noise ratio : 65dB
Separation : 60dB (1KHz)
Distortion : 0.1%
Tuner
Range : 87.5 ~ 108MHz
IF range : 10.7MHz
Usable sensitivity (-30dB) : 15dB
Signal-to-noise ratio : 60dB
Stereo separation : 30db
Frequency response : 50~12000Hz
4

INSTALLATION INSTRUCTION
SAFETY
•
•
•
CAUTION
•
•
•
•
•
•
When installing amplier, rst connect the
device ground connections before connecting
the plugs for the line-out jacks.
Ground connection of external devices may
not be connected to ground of car sound
system (housing).
Assign a mounting location that will not
obstruct driver in any circumstances. Or
cause injuries to drivers and passengers in
case emergency brake or accidents.
Ensure all wires are connected properly, and
that the unit is functioning well before tting
the unit into the mount.
Any unauthorized installation and
modication may cause malfunction to the
unit. Always use the parts that are included
with the units only.
Disconnect the negative terminal of the
battery (Refer to vehicle manufacturer’s
safety instructions).
Be wary to not damage vehicle components
when drilling holes.
Make sure you do not damage vehicle
components when drilling any holes.
The cross sections of the positive and negative
cables must not be less than 1.5 mm2.
Do not connect the vehicle’s plug connectors
to the radio!
Your vehicle may dier from the description
provided here. Blaupunkt is not liable in case
any damage caused by incorrect installation
or connection.
Please contact Blaupunkt dealers or vehicle’s
manufacturer if information provided here
does not t your specic installation
requirement.
Supplied mounting hardware
Available as optional accessories
Installation kit
5

INSTALLATION INSTRUCTION
1.
0° - 30°
+/– 10°
+/– 10°
2.
3.
4.
6

DISMANTLE INSTRUCTION
4.1.
2.
3.
1.
2.
7

WIRING DIAGRAM
1 3 5 7
2 4 6 8
1 3 5 7
2 4 6 8
A
B
A
A1 : -
A2 : MUTE
A3 : -
A4 : B+ (YELLOW)
A5 : ANT (BLUE)
A6 : ILL
A7 : ACC (RED)
A8 : GND (BLACK)
B
B1 : REAR RIGHT +
B2 : REAR RIGHT -
B3 : FRONT RIGHT +
B4 : FRONT RIGHT -
B5 : FRONT LEFT +
B6 : FRONT LEFT -
B7 : FRONT LEFT +
B8 : REAR LEFT -
RADIO ANTENNA
RCA OUT
WHTE : REAR RIGHT
RED : REAR LEFT
WHITE : FRONT RIGHT
RED : FRONT LEFT
•
•
•
•
•
This unit is desgined for 12V DC negative ground operation system only.
Before installating the unit, ensure vehicle is connected to 12V negative ground electrical system
The negative battery terminal must be disconnected before making connections.
This will help to prevent device from being damaged by short-circuit.
Ensure to connect the colour coded leads correctly according to the diagram.
Incorrect connections may cause unit to malfunction and may damage vehicle’s electrical system.
Ensure to connect the speaker (-) leads to the speaker (-) terminal.
Do not connect the left and right channel speaker cables to each other or the vehicle.
Do not block vents or radiator panels. Ensure good ventilation to prevent overheating.
8

TROUBLESHOOTING
SUPPORTED AUDIO FORMAT
Before going through the checklist, check wiring connection.
If any of the problem continues after checklist has been made, consult an authorized dealer.
SYMPTOM
No power supply
No sound output
Breaking/skipping
sound
Operating keys failed
to function
Unable to connect to
radio station and
automatic selection is
not functioning
CAUSE
Car ignition turned o
Broken fuse
Low volume
Wiring connection
Installation angle is
more than 30 degree
Defective disc or
dirty disc
Chipset technical error
Antenna cable
connection
Weak signals
FILE FORMAT
MP3
WMA
WAV
BIT RATE
32Kbps - 320Kbps
32Kbps - 320Kbps
32Kbps - 320Kbps
SOLUTION
Switch the key position to “ACC”
to turn on ignition.
Replace the fuse.
Adjust volume to desire level.
Check if wire is connected correctly.
Adjust installation angle to less than
30 degree.
Clean the disc or insert new disc.
Press reset button to reset unit.
Connect antenna cable correctly.
Select stations manually.
9