Blaupunkt New Orleans MP58 Specification sheet

Radio CD USB MP3 WMA
New Orleans MP58 7 648 009 310
Bedienungs- und Einbauanleitung
Operating and installation instructions
Mode d’emploi et de montage
Istruzioni d’uso e di installazione
Gebruiksaanwijzing en inbouwhandleiding
Bruks- och monteringsanvisning
Instrucciones de manejo e instalación
Instruções de serviço e de montagem
Betjenings- og monteringsvejledning
Instrukcja obsługi i montażowa
Návod k obsluze a k montáži
Návod na obsluhu a inštaláciu
Инструкция по эксплуатации и установке
www.blaupunkt.com
01_NewOrleansMP58_de.indd 101_NewOrleansMP58_de.indd 1 07.12.2007 14:56:47 Uhr07.12.2007 14:56:47 Uhr

2
14 15
8
19
7
11
10
13
2 3 56
4
12
01_NewOrleansMP58_de.indd 201_NewOrleansMP58_de.indd 2 07.12.2007 14:56:47 Uhr07.12.2007 14:56:47 Uhr

46
1button
to open the detachable control panel
(flip-release panel).
2SRC button
Sourceselectionbetweenradio andCD
and (if connected or switched on) CD
changer, USB data carrier and AUX.
3TRAF button
Short press: Switches traffic informa-
tion standby on/off.
Long press: Switches convenient RDS
function on/off.
4Arrow buttons
5MENU•OK button
Short press: Calls up the menus for ba-
sic settings and confirms settings.
Ending the scan function.
Long press: Starts the Scan function.
6On/Off button
Short press: Switches the device on. In
operation: Mutes the device.
Long press: Switches the device off.
7Volume control
8Display
9Keys 1 - 6
:DIS button
Shows/hides time.
In MP3/WMA mode: Calls up the MP3
browse mode
;ESCAPE button
to exit the menus.
<BND button
Short press: Selects the FM memory
banks and the MW and LW wavebands.
Long press: Starts the Travelstore func-
tion.
=AUD button
Calls up the Audio menu: adjusts bass,
treble, centre, subout, balance and
fader.
Switching X-BASS on/off and adjust-
ing it.
Selects an equalizer presetting.
>button (eject)
to eject the CD from the device
?CD tray
Controls
02_NewOrleansMP58_gb.indd 4602_NewOrleansMP58_gb.indd 46 07.12.2007 14:57:20 Uhr07.12.2007 14:57:20 Uhr

47
ENGLISH
Contents
About these instructions.................. 49
Symbols used................................49
Use as directed.............................. 49
Declaration of conformity................49
For your safety ................................50
If you are installing device yourself..... 50
Observe the following!....................50
Cleaning instructions...................... 50
Disposal of old unit ........................50
Scope of delivery.............................51
Optional equipment
(not part of the scope of delivery) ....51
Warranty......................................... 52
Service ........................................52
Detachable control panel ................. 52
Theft protection............................. 52
Detaching the control panel.............52
Attaching the control panel..............53
Switch-off time (OFF TIMER)........... 53
Timeout function ...........................53
Switching on/off.............................. 54
Switching on/off with the
On/Off button ...............................54
Switching on/off using the vehicle
ignition......................................... 54
Switching off with detachable
control panel.................................54
Changing the welcome text..............54
Adjusting the volume .......................55
Setting the power-on volume ...........55
Quickly reducing the volume (Mute)..55
Telephone Audio/Navigation Audio...56
Switching the confirmation beep
on/off .......................................... 56
Automatic Sound........................... 57
Radio mode ..................................... 58
Adjusting the tuner.........................58
Switching to radio mode .................58
Convenient RDS functions (AF, REG)....58
Selecting the waveband/
memory bank................................ 59
Tuning into a station .......................59
Setting the sensitivity of station
seek tuning ................................... 60
Storing stations .............................60
Storing stations automatically
(Travelstore) .................................61
Listening to stored stations .............61
Scanning receivable stations (SCAN) ...61
Setting the scanning time................61
Programme type (PTY) ..................62
Traffic information...........................63
Switching traffic information
priority on/off ............................... 63
Setting the volume for traffic
announcements.............................64
CD mode ......................................... 64
Starting the CD mode .....................64
Selecting tracks.............................65
Fast searching (audible).................. 65
Random track play (MIX).................65
Scanning tracks (SCAN)..................65
Repeating tracks (REPEAT) ............. 66
Interrupting playback (PAUSE).........66
Displaying the time ........................66
Traffic announcements in CD mode.... 66
Ejecting a CD.................................66
MP3/WMA mode ............................. 67
Preparing an MP3 data carrier .........67
Switching to MP3 mode..................68
Configuring the display...................69
Selecting a directory ...................... 69
Selecting tracks/files......................70
Selecting directories and track in
MP3 browse mode.........................70
02_NewOrleansMP58_gb.indd 4702_NewOrleansMP58_gb.indd 47 07.12.2007 14:57:21 Uhr07.12.2007 14:57:21 Uhr

48
Preamplifier output
(Preamp-Out/Sub-Out) ....................79
Adjusting Sub-Out level and
Sub-Out cut-off frequency...............79
X-BASS ...........................................80
Adjusting X-BASS boost (X-BASS) ....80
Adjusting equalizer X-BASS (E-BASS)...80
Equalizer presettings (PRESETS)...... 81
Adjusting the display settings........... 81
Adjusting the display brightness.......81
Setting the display illumination
colour ..........................................81
Adjusting the display viewing angle...83
External audio sources..................... 83
Adjusting the rear AUX input mode..... 84
Connecting other external audio
sources ........................................84
Bluetooth .....................................86
Restoring factory settings
(NORMSET)..................................... 87
Technical data ................................. 88
Amplifier ......................................88
Tuner ...........................................88
CD...............................................88
Pre-amp out..................................88
Input sensitivity............................. 88
Installation instructions .................563
Contents
Fast searching ............................... 71
Random track play (MIX).................71
Scanning tracks (SCAN)..................71
Repeating individual tracks or
whole directories (REPEAT).............71
Interrupting playback (PAUSE).........72
CD-changer mode............................ 72
Switching to CD changer mode ........72
Selecting CDs................................ 72
Selecting tracks.............................72
Fast searching (audible).................. 73
Repeating individual tracks or
whole CDs (REPEAT)......................73
Random track play (MIX).................73
Scanning all tracks on all CDs (SCAN)...73
Interrupting playback (PAUSE).........74
Displaying the time ........................74
Clock – Time....................................74
Adjusting the time.......................... 74
Selecting 12/24-hour clock mode....74
Displaying the time continuously
when the device is off and the
ignition is on ................................. 75
Sound .............................................75
Adjusting the bass (BASS) ..............76
Adjusting the treble (TREBLE) ......... 76
Setting the left/right volume
distribution (BALANCE).................. 77
Adjusting the front/rear volume
distribution (FADER)...................... 77
Adjusting equalizer bass (E-BASS) ...77
Adjusting equalizer middle
(E-MIDDLE) ..................................78
Adjusting equalizer treble
(E-TREBLE)...................................78
02_NewOrleansMP58_gb.indd 4802_NewOrleansMP58_gb.indd 48 07.12.2007 14:57:21 Uhr07.12.2007 14:57:21 Uhr

49
ENGLISH
About these instructions
About these instructions
These instructions contain important infor-
mation to easily and safely install and oper-
ate the device.
Read these instructions carefully and
completely before using the device.
Keep the instructions at a location so
that they are always accessible to all
users.
Always pass on the device to third par-
ties together with these instructions.
In addition, observe the instructions of the
devices used in conjunction with this de-
vice.
Symbols used
These instructions employ the following
symbols:
CAUTION!
Warns about laser beam
CAUTION!
Warns about damaging the CD
drive
The CE mark confirms the compli-
ance with EU directives.
Identifies a sequencing step
Identifies a listing
•
•
•
쏅
•
Use as directed
This device is intended for installation and
operation in a vehicle with 12 V vehicle sys-
tem voltage and must be installed in a DIN
slot. Observe the performance limits in the
technical data. Repairs and installation, if
necessary, should be performed by a spe-
cialist.
Declaration of conformity
The Blaupunkt GmbH declares that the de-
vice New Orleans MP58 complies with the
basic requirements and the other relevant
regulations of the directive 89/336/EWG.
02_NewOrleansMP58_gb.indd 4902_NewOrleansMP58_gb.indd 49 07.12.2007 14:57:21 Uhr07.12.2007 14:57:21 Uhr

50
For your safety
For your safety
The device was manufactured according to
the state of the art and established safety
guidelines. Even so, dangers may occur if
you do not observe the safety notes in these
instructions.
If you are installing device
yourself
You may only install the device yourself
if you are experienced in installing car
sound systems and are very familiar with
the electrical system of the vehicle. For this
purpose, observe the installation instruc-
tions at the end of these instructions.
Observe the following!
CAUTION
The device contains a Class 1 laser
that can cause injuries to your eyes.
Do not open the device and do not perform
any modifications.
In operation
Operate the device only if traffic situa-
tion permits it! Stop at a suitable loca-
tion to perform more extensive opera-
tions.
Removeorattach thecontrolpanel only
while the vehicle is standing an.
To protect your hearing, always listen
at a moderate volume. During mute
phases (e.g. when changing the au-
dio source or CD in the CD changer),
changing the volume is not audible.
Do not increase the volume during this
mute phase.
•
•
•
Always listen at a moderate volume so
that you can always hear acoustic warn-
ing signals (e.g. police).
After operation
The device is worthless to a thief with-
out the control panel. Always remove
the control panel whenever you leave
the vehicle.
Transport the control panel so that it is
protected against impacts and the con-
tacts cannot become dirty.
Cleaning instructions
Solvents, cleaning and scouring agents as
well as dashboard spray and plastics care
product may contain ingredients that will
damage the surface of the device.
Use only a dry or slightly moistened cloth
for cleaning the device.
Disposal of old unit
Do not dispose of your old unit in
the household trash!
Use the return and collection systems avail-
able to dispose of the old device.
•
•
•
02_NewOrleansMP58_gb.indd 5002_NewOrleansMP58_gb.indd 50 07.12.2007 14:57:21 Uhr07.12.2007 14:57:21 Uhr

51
ENGLISH
Scope of delivery
The scope of delivery includes:
1 Car sound system
1 Case for the control panel
1 Support frame
2 Disassembly tools
1 Guide pin
1 USB connecting cable
1 Operating instructions
Optional equipment
(not part of the scope of delivery)
Use only accessories approved by
Blaupunkt.
Command and Control (C‘n‘C)
This device supports the command-and-
control interface (C‘n‘C) of Blaupunkt. The
C‘n‘C interface allows an even more con-
venient control of devices and data carriers
that are connected via a C‘n‘C-capable in-
terface with the car sound system (see also
Bluetooth/USB interface and iPod/USB in-
terface).
Remote control
Thesteeringwheel and/orhandheld remote
control allows you to access the basic func-
tions of your car sound system safely and
conveniently.
You cannot switch the device on/off using
the remote control!
You can find out from your Blaupunkt dealer
or on the Internet at www.blaupunkt.com
which remote controls can be used with
your car sound system.
Bluetooth/USB interface
ForBluetoothapplications,suchas wireless
hands-freecalling andBluetoothstreaming,
you can connect a Bluetooth interface. The
Bluetooth/USB interface provides an addi-
tional USB connection.
The Bluetooth/USB interface is also avail-
able in a C‘n‘C-capable version or can be
rendered C‘n‘C-capable with a software
update.
Information about the Bluetooth/USB in-
terface is available at your Blaupunkt spe-
cialised dealer or on the Internet under
www.blaupunkt.com.
iPod/USB interface
With the iPod interface or the iPod/USB
interface, you can connect an iPod to the
radio device and conveniently control the
playback via the radio device. The iPod/
USB interface provides an additional USB
connection.
The iPod/USB interface is also available in
a C‘n‘C-capable version or can be rendered
C‘n‘C-capable with a software update.
Information about the iPod/USB inter-
face is available at your Blaupunkt spe-
cialised dealer or on the Internet under
www.blaupunkt.com.
Amplifier
You can use all Blaupunkt and Velocity am-
plifiers.
CD changers
You can connect the following Blaupunkt
CD changers:
CDC A 03, CDC A 08 and IDC A 09.
Scope of delivery
02_NewOrleansMP58_gb.indd 5102_NewOrleansMP58_gb.indd 51 07.12.2007 14:57:21 Uhr07.12.2007 14:57:21 Uhr

52
Warranty
We provide a manufacturer's warranty
for products bought within the European
Union. For devices purchased outside the
European Union, the warranty terms issued
by our respective responsible domestic
agency are valid.
The warranty terms can be called up under
www.blaupunkt.com or requested directly
from:
Blaupunkt GmbH
Hotline
Robert-Bosch-Str. 200
D-31139 Hildesheim, Germany
Service
Insome countries, Blaupunktoffers arepair
and pick-up service.
Information about the availability of this
service in your country can be found at
www.blaupunkt.com.
If you want to take advantage of this serv-
ice, you may request a pick-up service for
your device via the Internet.
Detachable control panel
Theft protection
The device is equipped with a detachable
control panel (flip-release panel) as a way
of protecting your equipment against theft.
The device is worthless to a thief without
this control panel.
Protect your device against theft by taking
the control panel with you whenever you
leave your vehicle. Do not leave the control
panel inside your vehicle - not even in a hid-
ing place.
Notes:
Never drop the control panel.
Do not expose the control panel to di-
rect sunlight or another heat source.
Avoid direct skin contact with the
control panel’s electrical contacts. If
necessary, clean the contacts with a
lint-free cloth moistened with clean-
ing alcohol.
Detaching the control panel
Press the button 1.
The control panel opens to the bottom.
Hold the control panel by its right side
and then pull it straight out of the
bracket.
•
•
•
쏅
쏅
Warranty Detachable control panel
02_NewOrleansMP58_gb.indd 5202_NewOrleansMP58_gb.indd 52 07.12.2007 14:57:22 Uhr07.12.2007 14:57:22 Uhr

53
ENGLISH
Notes:
The device is switched off after a time
preset by you. For further details,
please read the section "Switch-off
time (OFF TIMER)" in this chapter.
The device remembers the audio
source played last for the next switch-
on.
Any CD already inserted in the device
remains there.
Attaching the control panel
1.
2.
Hold the control panel approximately
at a right angle to the device. (see fig-
ure, 1.)
Push the control panel into the guides
at the bottom edge of the device.
Pushthe controlpanel carefullyintothe
bracket until it clicks into place.
Fold the control panel up into the slot
and press it gently into place until it
clicks. (see figure, 2.)
•
•
•
쏅
쏅
쏅
쏅
Switch-off time (OFF TIMER)
After opening the control panel, the device
is switched off after an adjustable time. You
can set this time from 15 to 30 seconds.
Press the MENU•OK button 5.
Press the or button 4repeatedly
until "VARIOUS MENU" appears on the
display.
Press the button 4to open the
menu.
Press the or button 4repeatedly
until the display shows "OFF TIMER".
Press the button 4to open the
menu.
Set the time with the or button
4.
When you have finished making your chang-
es,
press the ESCAPE button ;.
Timeout function
The device features a time-out function
(time window).
For example, if you press the MENU•OK
button 5and select a menu item, the de-
vice switches back after approx. 8 seconds
after the last button activation. The settings
performed are saved.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Detachable control panel
02_NewOrleansMP58_gb.indd 5302_NewOrleansMP58_gb.indd 53 07.12.2007 14:57:22 Uhr07.12.2007 14:57:22 Uhr

54
Switching on/off
There are various ways of switching the
device on/off:
Switching on/off with the On/Off
button
For switch-on, press the On/Off button
6.
The device switches on.
To switch off the device, press and hold
down the On/Off button 6for longer
than 2 seconds.
The device switches off.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
Switching on/off using the
vehicle ignition
The device will switch on/off simultane-
ously with the ignition if the device is cor-
rectly connected to the vehicle’s ignition as
shown in the installation instructions and
you did not switch the device off by press-
ing the On/Off button 6.
Switching off with detachable
control panel
Detach the control panel.
Thedevicesswitchesoffafterthetimesetin
the "OFF TIMER" menu. For further details,
please read the section "Switch-off time
(OFF TIMER)" in the chapter "Detachable
control panel".
쏅
쏅
쏅
Changing the welcome text
When you switch on the device, an ani-
mation appears, followed by a welcome
text. The welcome text is factory set to
"BLAUPUNKT".
You can enter your own welcome text of up
to 9 characters.
Press the MENU•OK button 5.
Press the or button 4repeatedly
until "VARIOUS MENU" appears on the
display.
Press the button 4to open the
menu.
"ON MESSAGE" appears on the display.
Press the button 4to open the
menu.
Press the or button 4to enter
the character at the current position.
Press the button 4to change to the
next position.
Press the MENU•OK button 5to
store the name.
When you have finished making your chang-
es,
press the ESCAPE button ;.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Switching on/off
02_NewOrleansMP58_gb.indd 5402_NewOrleansMP58_gb.indd 54 07.12.2007 14:57:22 Uhr07.12.2007 14:57:22 Uhr

55
ENGLISH
Note:
To protect your hearing, the power-on
volume is limited to the value "38" for
the setting "Last Volume". If the volume
was higher before switch-off, the value
is automatically set to "38" at switch-
on. This prevents an unintentionally
and unexpectedly high volume when
switching on the device.
When you have finished making your chang-
es,
press the ESCAPE button ;.
Quickly reducing the volume
(Mute)
You can quickly reduce the volume to a
preset level.
Briefly press the On/Off button 6.
"MUTE" appears on the display.
Cancelling mute
To return to your previously set volume
level,
briefly press the On/Off button 6
again.
Adjusting the mute level
You can adjust the mute level.
Press the MENU•OK button 5.
Press the or button 4repeatedly
until "VOLUME MENU" appears on the
display.
Press the button 4to open the
menu.
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting the volume
You can adjust the volume in steps from 0
(off) to 50 (maximum).
To increase the volume,
turn the volume control 7clockwise.
To decrease the volume,
turn the volume control 7counter-
clockwise.
Setting the power-on volume
You can set the power-on volume.
Press the MENU•OK button 5.
Press the or button 4repeatedly
until "VOLUME MENU" appears on the
display.
Press the button 4to open the
menu.
"ON VOLUME" appears on the display.
Press the button 4to open the
menu.
Set a specific power-on volume with
the or button 4.
Or:
Press the button 4to select the
"LAST VOLUME" setting.
To help you adjust the setting more easily,
the device will increase or decrease the
volume as you make your changes.
Ifyouchangethesettingto"LASTVOLUME",
thevolumewhen thedeviceswitcheson will
be the same as the volume level that was set
the last time you switched the device off.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Volume
02_NewOrleansMP58_gb.indd 5502_NewOrleansMP58_gb.indd 55 07.12.2007 14:57:22 Uhr07.12.2007 14:57:22 Uhr

56
Press the or button 4repeatedly
until "MUTE LEVEL" appears on the dis-
play.
Press the button 4to open the
menu.
Set the mute level with the or but-
ton 4.
When you have finished making your chang-
es,
press the ESCAPE button ;.
Telephone Audio/Navigation
Audio
Muting during telephone/navigation
mode
If your car sound system is connected with
a cell phone or navigation system, the car
soundsystemis mutedwhen acall is incom-
ing or during a voice output of the naviga-
tion. The call or the voice output is played
back via the loudspeakers of the card sound
system. In order for this feature to work, the
mobiletelephoneornavigationsystemmust
be connected to the car sound system as
described in the installation instructions.
You can find out from your Blaupunkt dealer
which navigation systems can be used with
your car sound system.
If a call is incoming or a navigation an-
nouncement takes place, the display shows
"TELEPHONE".
Adjusting the volume for telephone
audio/navigation audio
During a telephone call or a voice output of
the navigation, no traffic announcements
are switched through.
쏅
쏅
쏅
쏅
You can set the volume level at which the
telephone calls or navigation announce-
ments are mixed in.
Press the MENU•OK button 5.
Press the or button 4repeatedly
until "VOLUME MENU" appears on the
display.
Press the button 4to open the
menu.
Press the or button 4repeatedly
until "TEL VOLUME" appears on the dis-
play.
Press the button 4to open the
menu.
Set the desired volume with the or
button 4.
When you have finished making your chang-
es,
press the ESCAPE button ;.
Note:
You can use the volume control 7to
adjust the volume of telephone calls
and navigation announcements whilst
you are listening to them.
Switching the confirmation beep
on/off
The system will output a confirmation beep
for some functions if you keep a button
pressed down for longer than 2 seconds,
for instance, when assigning a radio station
to a station preset button. You can switch
the beep on or off.
Press the MENU•OK button 5.
Press the or button 4repeatedly
until "VOLUME MENU" appears on the
display.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Volume
02_NewOrleansMP58_gb.indd 5602_NewOrleansMP58_gb.indd 56 07.12.2007 14:57:22 Uhr07.12.2007 14:57:22 Uhr

57
ENGLISH
Press the button 4to open the
menu.
Press the or button 4repeatedly
until "BEEP ON" or "BEEP OFF" appears
on the display.
Switch the BEEP ON or OFF with the
button or 4.
When you have finished making your chang-
es,
press the ESCAPE button ;.
Automatic Sound
This function automatically adjusts the vol-
ume of the car sound system to the speed
driven and the associated driving noises.
For example, at an increased speed, the
volume is automatically increased to com-
pensate for the increased driving noise
(e.g. due to airstream).
For this purpose, your vehicle must provide
the tachometer signal and the car sound
system must be connected as described in
the installation instructions.
You can adjust the automatic volume in-
crease in 6 increments (OFF, 1-5).
Press the MENU•OK button 5.
Press the or button 4repeatedly
until "VOLUME MENU" appears on the
display.
Press the button 4to open the
menu.
Press the or button 4repeat-
edly until "AUTO SOUND" appears on
the display.
Press the button 4to open the
menu.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Set the volume adjustment OFF or 1 - 5
with the or button 4.
When you have finished making your chang-
es,
press the ESCAPE button ;.
Note:
The optimum setting for the speed-
dependent volume adjustment feature
depends on how noise levels develop in
your particular vehicle. Determine the
perfect value for your vehicle using trial
and error.
쏅
쏅
Volume
02_NewOrleansMP58_gb.indd 5702_NewOrleansMP58_gb.indd 57 07.12.2007 14:57:22 Uhr07.12.2007 14:57:22 Uhr

58
Radio mode
This device is equipped with an RDS radio
receiver. Manyof thereceivableFMstations
broadcast a signal that not only carries the
programme but also additional information
such as the station name and programme
type (PTY).
The station name appears on the display as
soon as the tuner receives it.
Adjusting the tuner
To ensure proper functioning of the tuner,
the device must be set for the region in
which it is being operated. You can select
between Europe (EUROPE), America (USA)
and Thailand (THAI). The tuner is factory
set to the region in which it was sold. If you
experience problems with your radio recep-
tion, please check this setting.
Note:
The radio functions described in these
operating instructions refer to the tun-
er setting EUROPE.
Switch off the device by pressing the
On/Off button 6.
Hold the buttons 19and DIS :
pressed at the same time and switch
on the device again with the On/Off
button 6.
The current setting (EUROPE, USA or THAI)
is displayed.
Select your tuner region with the or
button 4.
쏅
쏅
쏅
To save the setting,
press the MENU-OK button 5. The ra-
dio starts with the setting selected last
(radio, CD, CD changer, USB or AUX).
Switching to radio mode
If you are in CD, CD changer, USB or AUX
mode,
press the BND button <
OR
press the SRC button 2repeatedly
until "TUNER" appears on the display.
Convenient RDS functions
(AF, REG)
The convenient RDS functions AF
(Alternative Frequency) and REGIONAL ex-
tend your radio’s range of functions.
AF: If the RDS function is activated, the
radio automatically tunes into the best
receivable frequency for the station
that is currently set.
REGIONAL: At certain times, some ra-
dio stations divide their programme
into regional programmes providing
different content. You can use the REG
function to prevent the car radio from
switching to alternative frequencies
that are transmitting different pro-
gramme content.
Note:
REGIONAL must be activated/deacti-
vated separately in the menu.
쏅
쏅
쏅
•
•
Radio mode
02_NewOrleansMP58_gb.indd 5802_NewOrleansMP58_gb.indd 58 07.12.2007 14:57:23 Uhr07.12.2007 14:57:23 Uhr

59
ENGLISH
Switching REGIONAL on/off
Note:
This setting is only possible in radio
mode.
Press the MENU•OK button 5.
Press the or button 4repeat-
edly until "TUNER MENU" appears on
the display.
Press the button 4to open the
menu.
Press the or button 4repeatedly
until "REG" appears on the display.
"OFF" or "ON" is displayed alongside
"REG".
To switch REGIONAL on/off,
press the or button 4.
When you have finished making your chang-
es,
press the ESCAPE button ;.
Switching the convenient RDS function
on/off
To switch the RDS functions AF and
REGIONAL on or off,
press and hold down the TRAF button
3for longer than 2 seconds.
The display briefly shows the selected set-
ting "RDS ON" or "RDS OFF".
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Selecting the waveband/memory
bank
This device can receive programmes broad-
cast over the FM frequency range as well as
the MW and LW (AM) wavebands. There are
three memory banks available for the FM
waveband (FM1, FM2 and FMT) and one
for each of the MW and LW wavebands.
Six stations can be stored in each memory
bank.
To switch between the FM memory banks
(FM1, FM2 and FMT) and the MW and LW
wavebands,
press the BND button <.
Tuning into a station
There are various ways of tuning into a
station.
Automatic station seek tuning
Press the or button 4.
The radio tunes into the next receivable
station.
Note:
If the priority for traffic information is
active (the display shows the traffic
jam symbol), the next traffic informa-
tion station is set.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manu-
ally if the convenient RDS function and
PTY are deactivated.
쏅
쏅
Radio mode
02_NewOrleansMP58_gb.indd 5902_NewOrleansMP58_gb.indd 59 07.12.2007 14:57:23 Uhr07.12.2007 14:57:23 Uhr

60
To change the set frequency in small incre-
ments,
briefly press the or button 4.
To change the set frequency quickly,
press and hold down the or button
4for a longer period of time.
Browsing through broadcasting
networks (FM only)
If a radio station provides several pro-
grammes, you have the option of browsing
through its so-called "broadcasting net-
work".
Note:
The convenient RDS function and PTY
must be activated before you can use
this feature.
Press the or button 4to switch
to the next station on the broadcasting
network.
Note:
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
receive the stations, use the Scan or
Travelstore function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
Press the MENU•OK button 5.
Press the or button 4repeat-
edly until "TUNER MENU" appears on
the display.
쏅
쏅
쏅
쏅
쏅
Press the button 4to open the
menu.
Press the or button 4repeatedly
until "SENSITIVITY" appears on the dis-
play.
Press the button 4to open the
menu.
The display shows the currently set sensi-
tivity level. "SENS HI6" indicates the high-
est sensitivity, "SENS LO1" the lowest.
Set the desired sensitivity with the
or button 4.
When you have finished making your chang-
es,
press the ESCAPE button ;.
Notes:
This setting is only possible in radio
mode.
The device stores the sensitivity value
setinthe respectiveFMand AMwave-
band.
Storing stations
Storing stations manually
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
Tune into the desired station.
Press and hold down one of the station
buttons 1- 69for longer than 2 sec-
onds to assign the station to that but-
ton.
쏅
쏅
쏅
쏅
쏅
•
•
쏅
쏅
쏅
Radio mode
02_NewOrleansMP58_gb.indd 6002_NewOrleansMP58_gb.indd 60 07.12.2007 14:57:23 Uhr07.12.2007 14:57:23 Uhr

61
ENGLISH
Storing stations automatically
(Travelstore)
You can automatically store the six stations
offering the strongest reception in the re-
gion (FM only). The stations are stored in
the FMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
Press and hold down the BND button
<for longer than 2 seconds.
The storing procedure begins. "FM
TRAVELSTORE" appears on the display.
After the process has completed, the radio
willplaythe stationthat isstoredin memory
location 1 of the FMT memory bank.
Note:
If the priority for traffic information is
active (the display shows the traffic
jam symbol), only traffic information
stations are stored.
Listening to stored stations
Select the memory bank or waveband.
Press one of the station buttons 1 - 6
9.
The stored station is played if it can be re-
ceived.
Scanning receivable stations
(SCAN)
You can use the scan function to play all
the receivable stations briefly. You can set
the scanning time in the menu to between
5 and 30 seconds.
쏅
쏅
쏅
Starting SCAN
Press and hold down the MENU•OK
button 5for longer than 2 seconds.
The radio scans the next receivable station.
"SCAN" and the current frequency or the
station name appear on the display.
Cancelling the SCAN and continuing to
listen to a station
Press the MENU•OK button 5.
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
Press the MENU•OK button 5.
Press the or button 4repeatedly
until "VARIOUS MENU" appears on the
display.
Press the button 4to open the
menu.
Press the or button 4repeat-
edly until "SCAN TIME" appears on the
display.
Press the button 4to open the
menu.
Set the desired scan time with the or
button 4.
When you have finished making your chang-
es,
press the ESCAPE button ;.
Note:
The defined scanning time is also ap-
plied by the system to scanning carried
out in CD and MP3 mode.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Radio mode
02_NewOrleansMP58_gb.indd 6102_NewOrleansMP58_gb.indd 61 07.12.2007 14:57:23 Uhr07.12.2007 14:57:23 Uhr

62
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they are
broadcasting. Your car radio can receive
and display this information.
For example, the programme types can be:
CULTURE TRAVEL JAZZ
SPORT SERVICE POP
ROCK SCIENCE CHILDREN
You can use the PTY function to select sta-
tions of a particular programme type.
PTY-EON
If you specify the programme type and start
seek tuning, the radio will switch from the
current station to a station of the selected
programme type.
Notes:
If the tuner does not find a station
that corresponds to the selected pro-
grammetype,youwillhearabeepand
"NOT AVAILABLE" appears briefly in
the display. The radio will then retune
to the station that it received last.
If the tuned radio station or another
station on the broadcasting network
broadcasts your selected programme
type at a later point in time, the radio
will automatically switch from the cur-
rently tuned station or from CD, CD-
changer, USB or AUX mode to the sta-
tion whose programme type matches
the one you selected.
•
•
If you do not want this PTY EON
switching, disable PTY. First, switch
to radio mode using the SRC button
2or BND button <. In CD, CD
changer, USB or AUX mode, the Tuner
menu with the "PTY ON/ OFF" menu
item is not available.
Switching PTY on/off
Press the MENU•OK button 5.
Press the or button 4repeat-
edly until "TUNER MENU" appears on
the display.
Press the button 4to open the
menu.
"PTY" and the current setting appear in the
display.
Press the or button 4to switch
PTY ON or OFF.
When you have finished making your chang-
es,
press the ESCAPE button ;.
Selecting the PTY language
You can select the language for the display
of the programme types. Options include
DEUTSCH, ENGLISH and FRANÇAIS.
Note:
This setting is only possible in radio
mode.
Press the MENU•OK button 5.
Press the or button 4repeat-
edly until "TUNER MENU" appears on
the display.
•
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Radio mode
02_NewOrleansMP58_gb.indd 6202_NewOrleansMP58_gb.indd 62 07.12.2007 14:57:23 Uhr07.12.2007 14:57:23 Uhr

63
ENGLISH
Press the button 4to open the
menu.
Press the or button 4repeatedly
until "PTY LANGUAGE" appears on the
display.
Press the button 4to open the
menu.
Set the desired language with the or
button 4.
When you have finished making your chang-
es,
press the ESCAPE button ;.
Selecting a programme type and
starting seek tuning
The current program type appears only
briefly on the display.
Press the or button 4.
During the display time, press the or
button 4to change to a different
program type.
Press the or button 4to start
seek tuning.
The radio will then tune into the next station
that it finds that corresponds to your select-
ed programme type.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Traffic information
Your device is equipped with an RDS EON
receiving unit. EON (Enhanced Other
Network) ensures that whenever a traffic
announcement (TA) is broadcast, the sys-
tem switches automatically from a station
that does not provide traffic reports to the
appropriate traffic information station with-
in the broadcasting network that does.
Once the traffic announcement has been
played, the system will switch back to the
programme that you were listening to before.
Switching traffic information
priority on/off
Press the TRAF button 3.
Thepriority fortrafficannouncements isac-
tivated if the display shows the traffic jam
symbol.
Notes:
You will hear a warning beep,
if you leave the reception area of a
traffic information station that you
are currently listening to.
If you leave the reception area of a
traffic information station that the
system is tuned into while you are
in the CD, CD changer, USB or AUX
mode, and the subsequent automatic
seek tuning cannot find a new traffic
information station.
If you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
If you hear the warning beep, you can ei-
ther switch off traffic information priority
or tune into a station that broadcasts traffic
information.
쏅
•
•
•
Radio mode Traffic information
02_NewOrleansMP58_gb.indd 6302_NewOrleansMP58_gb.indd 63 07.12.2007 14:57:23 Uhr07.12.2007 14:57:23 Uhr