Blaupunkt LONDON MP37 7 647 553 310 User manual

Radio CD MP3 WMA
London MP37 7 647 553 310
www.blaupunkt.com
01LondonMP37_de.indd 101LondonMP37_de.indd 1 29.11.2006 16:19:58 Uhr29.11.2006 16:19:58 Uhr
Bedienungsanleitung
Operating instructions
Mode d’emploi
Istruzioni d’uso
Gebruiksaanwijzing
Bruksanvisning
Instrucciones de manejo
Instruções de serviço
Betjeningsvejledning
Instrukcja obsługi
Návod k obsluze
Návod na obsluhu

2
14
25
9
1
3
46
7810
11
1213
01LondonMP37_de.indd 201LondonMP37_de.indd 2 29.11.2006 16:19:58 Uhr29.11.2006 16:19:58 Uhr

37
ENGLISH
1button to open the flip-release con-
trol panel.
2On/Off button
Short press: Switches the device on. In
operation: Mutes the device.
Long press: Switches the device off.
3SOURCE button
Short press: Source selection be-
tween radio and CD and (if connected
or switched on) CD changer, AUX and
FRONT AUX.
Long press: Briefly displaying time.
4Volume control
5Keys 1 - 5
6FRONT AUX input
7TRAF•RDS button
Short press: Switches traffic informa-
tion standby on/off.
Long press: Switches convenient RDS
function on/off.
8Arrow keys and
9ESC•DIS button
Short press:Changesfroma menu item
back to the main menu (also in Audio
menu).
Long press: Changes display contents.
:Arrow keys and
;MENU•OK button
Short press: Calls up the menus for
basic settings and confirms settings.
Ending the scan function.
Long press: Starts the Scan function.
<AUD button to call up the Audio menu:
Adjusting bass, treble, middle, subout,
balance and fader.
Switching X-BASS on/off and adjust-
ing it.
Selects an equaliser presetting.
=BAND•TS button
Short press: Selects the FM memory
banks and the MW and LW wavebands.
Long press: Starts the Travelstore func-
tion.
>button (Eject) for removing a CD
from the device.
Controls
02_LondonMP37_gb.indd 3702_LondonMP37_gb.indd 37 29.11.2006 16:21:08 Uhr29.11.2006 16:21:08 Uhr

38
Contents
About these instructions.................. 40
Symbols used................................40
Use as directed..............................40
Declaration of conformity................40
For your safety ................................41
If you are installing device yourself....41
Cleaning notes...............................41
Disposal of old unit
(EU countries only) ........................42
Scope of delivery.............................42
Optional equipment
(not part of the scope of delivery) ....42
Warranty.........................................43
Service ........................................43
Detachable control panel ................. 43
Theft protection.............................43
Detaching the control panel.............43
Attaching the control panel..............44
Switch-off time (OFF TIMER)........... 44
Switching on/off.............................. 45
Adjusting the volume ....................... 45
Setting the power-on volume ...........45
Quickly reducing the volume (Mute).. 46
Telephone Audio/Navigation Audio...46
Switching the confirmation
beep on/off...................................47
Radio mode ..................................... 47
Adjusting the tuner.........................47
Switching to radio mode .................48
Convenient RDS functions (AF, REG)....48
Selecting the waveband/
memory bank................................ 48
Tuning into a station .......................49
Setting the sensitivity of station seek
tuning ..........................................49
Storing stations ............................. 50
Storing stations automatically
(Travelstore) .................................50
Listening to stored stations ............. 50
Scanning receivable stations (SCAN) ...50
Setting the scanning time................50
Programme type (PTY) ..................51
Optimising radio reception.............. 52
Traffic information........................... 53
Switching traffic information
priority on/off ............................... 53
Setting the volume for traffic
announcements.............................53
CD mode ......................................... 54
Switching to CD mode .................... 54
Selecting tracks.............................54
Fast track selection ........................54
Fast searching (audible)..................55
Random track play (MIX).................55
Scanning tracks (SCAN)..................55
Repeating tracks (Repeat)...............55
Interrupting playback (PAUSE).........55
Configuring the display ...................56
Displaying CD text..........................56
Traffic announcements in CD mode ..56
Ejecting a CD.................................56
MP3/WMA mode ............................. 57
Preparing an MP3 CD .....................57
Switching to MP3 mode ..................58
Configuring the display ...................58
Selecting a directory ......................59
Selecting tracks/files......................59
Fast search ................................... 59
Random track play – MIX.................59
Scanning tracks – SCAN ................. 60
Repeated playback of individual
tracks or entire directories – REPEAT ...60
Interrupting playback (PAUSE).........60
02_LondonMP37_gb.indd 3802_LondonMP37_gb.indd 38 29.11.2006 16:21:08 Uhr29.11.2006 16:21:08 Uhr

39
ENGLISH
Adjusting the display settings........... 68
Adjusting the display brightness....... 68
Setting the display illumination
colour ..........................................68
External audio sources.....................69
Switching the rear AUX input on/off..70
Technical data ................................. 70
Contents
CD-changer mode............................ 61
Switching to CD-changer mode........61
Selecting CDs................................ 61
Selecting tracks.............................61
Fast searching (audible)..................61
Repeating individual tracks or whole
CDs (REPEAT)...............................61
Random track play (MIX).................61
Scanning all tracks on all CDs (SCAN)...62
Interrupting playback (PAUSE).........62
Configuring the display ...................62
Clock – Time....................................63
Displaying the time ........................ 63
Setting the time.............................63
Selecting 12/24-hour clock mode....63
Displaying the time continuously
when the device is off and the
ignition is on ................................. 63
Sound .............................................64
Adjusting the bass .........................64
Adjusting the middle ...................... 64
Adjusting the treble........................ 65
Setting the left/right volume
distribution (Balance) ....................65
Adjusting the front/rear volume
distribution (Fader)........................65
Preamplifier output
(Preamp-Out/Sub-Out) ....................66
Adjusting the sub-out level ..............66
Adjusting the sub-out cutoff
frequency.....................................66
X-BASS ........................................... 67
Adjusting the X-BASS boost............. 67
Equalizer presettings (Presets) ........ 67
02_LondonMP37_gb.indd 3902_LondonMP37_gb.indd 39 29.11.2006 16:21:08 Uhr29.11.2006 16:21:08 Uhr

40
About these instructions
About these instructions
These instructions contain important infor-
mation to easily and safely install and oper-
ate the device.
Read these instructions carefully and
completely before using the device.
Keep the instructions at a location so
that they are always accessible to all
users.
Always pass on the device to third par-
ties together with these instructions.
In addition, observe the instructions of the
devices used in conjunction with this de-
vice.
Symbols used
These instructions employ the following
symbols:
DANGER!
Warns about injuries
CAUTION!
Warns about laser beam
CAUTION!
Warns about damaging the CD
drive
The CE mark confirms the compli-
ance with EU directives.
Identifies a sequencing step
Identifies a listing
•
•
•
쏅
•
Use as directed
This device is intended for installation and
operation in a vehicle with 12 V vehicle sys-
tem voltage and must be installed in a DIN
slot. Observe the 'performance limits in the
technical data. Repairs and installation, if
necessary, should be performed by a spe-
cialist.
Declaration of conformity
The Blaupunkt GmbH declares that this
car sound system complies with the basic
requirements and the other relevant regula-
tions of the directive 1999/5/EG.
02_LondonMP37_gb.indd 4002_LondonMP37_gb.indd 40 29.11.2006 16:21:08 Uhr29.11.2006 16:21:08 Uhr

41
ENGLISH
For your safety
For your safety
The device was manufactured according to
the state of the art and established safety
guidelines. Even so, dangers may occur if
you do not observe the safety notes in these
instructions:
If you are installing device
yourself
You may only install the device yourself if
you are experienced in installing car sound
systems and are very familiar with the elec-
trical system of the vehicle. For this pur-
pose, observe the installation instructions
at the end of these instructions.
Observe the following!
DANGER!
Increased risk of injury from
connector
In case of an accident, the protruding con-
nector in the FRONT-AUX-IN socket may
cause injuries. The use of straight plugs or
adapters can lead to an increased risk of in-
jury.
For this reason, we recommend using
angled jack plugs, e.g. the Blaupunkt
accessories cable (7 607 001 535).
CAUTION!
The device contains a Class 1 laser
that can cause injuries to your eyes.
Do not open the device and do not perform
any modifications.
ü
In operation
Operate the device only if traffic situa-
tion permits it! Stop at a suitable loca-
tion to perform more extensive opera-
tions.
Remove orattach thecontrolpanel only
while the vehicle is standing an.
Always listen at a moderate volume
so that you can hear acoustic warning
signals (e.g. police sirens) and protect
your hearing. Do not increase the vol-
ume when selecting a different audio
source or while the CD changer chang-
es the CD. The device is briefly muted.
After operation
The device is worthless to a thief with-
out the control panel. Always remove
the control panel whenever you leave
the vehicle.
Transport the control panel so that it is
protected against impacts and the con-
tacts cannot become dirty.
Cleaning notes
Solvents, cleaning and scouring agents as
well as dashboard spray and plastics care
product may contain ingredients that will
damage the surface of the device.
Use only a dry or slightly moistened
cloth for cleaning the device.
If necessary, clean the contacts of the
control panel regularly using a soft
cloth moistened with cleaning alcohol.
•
•
•
•
•
•
•
02_LondonMP37_gb.indd 4102_LondonMP37_gb.indd 41 16.05.2007 14:26:02 Uhr16.05.2007 14:26:02 Uhr

42
Disposal of old unit
(EU countries only)
Do not dispose of your old unit in
the household trash!
Use the return and collection systems avail-
able to dispose of the old device.
Scope of delivery
The scope of delivery includes:
1 Car sound system
1 Case for the control panel
1 Support frame
2 Disassembly bar
1 Guide pin
1 Operating instructions
Optional equipment
(not part of the scope of delivery)
Use only accessories approved by
Blaupunkt.
Remote control
Thesteeringwheel and/orhandheld remote
control allows you to access the basic func-
tions of your car sound system safely and
conveniently.
You cannot switch the device on/off using
the remote control!
You can find out from your Blaupunkt dealer
or on the Internet at www.blaupunkt.com
which remote controls can be used with
your car sound system.
Amplifier
You can use all Blaupunkt and Velocity am-
plifiers.
CD changers
You can connect the following Blaupunkt
CD changers:
CDC A 03, CDC A 08 and IDC A 09.
For your safety Scope of delivery
02_LondonMP37_gb.indd 4202_LondonMP37_gb.indd 42 29.11.2006 16:21:09 Uhr29.11.2006 16:21:09 Uhr

43
ENGLISH
Warranty
We provide a manufacturer's warranty
for products bought within the European
Union. Devices purchased outside the
European Union are subject to the warranty
terms published by our respective regional
agency.
The warranty terms can be called up under
www.blaupunkt.com or requested directly
from:
Blaupunkt GmbH
Hotline
Robert-Bosch-Str. 200
D-31139 Hildesheim
Service
Insomecountries, Blaupunkt offersa repair
and pick-up service.
Information about the availability of this
service in your country can be found at
www.blaupunkt.com.
If you want to take advantage of this serv-
ice, you may request a pick-up service for
your device via the Internet.
Detachable control panel
Theft protection
The device is equipped with a detachable
control panel (flip-release panel) as a way
of protecting your equipment against theft.
The device is worthless to a thief without
this control panel.
Protect your device against theft by taking
the control panel with you whenever you
leave your vehicle. Do not leave the control
panel inside your vehicle - not even in a hid-
ing place.
Notes:
Never drop the control panel.
Never expose the control panel to di-
rect sunlight or other heat sources.
Avoid direct skin contact with the
control panel’s electrical contacts. If
necessary, please clean the contacts
with a lint-free cloth moistened with
cleaning alcohol.
Detaching the control panel
Press the button 1.
The control panel opens out towards you.
Hold the control panel by its right side
and then pull the control panel straight
out of the bracket.
•
•
•
쏅
쏅
Warranty Detachable control panel
02_LondonMP37_gb.indd 4302_LondonMP37_gb.indd 43 29.11.2006 16:21:09 Uhr29.11.2006 16:21:09 Uhr

44
Notes:
The device is switched off after a
time preset by you. For instructions,
please read the section "Switch-off
time (OFF TIMER)" in this chapter.
All the current settings are saved.
Any CD already inserted in the device
remains there.
Attaching the control panel
Hold the control panel approximately at
a right angle to the device.
Slide the control panel into the de-
vice’s guides that are positioned on the
left and right at the lower edge of the
housing. Push the control panel care-
fully into the bracket until it clicks into
place.
Carefully flip up the control panel until
it clicks into place.
1.
2.
If the device was still switched on when you
detached the control panel, it will automati-
cally switch on with the last setting activat-
ed (radio, CD, CD changer or AUX) when
the panel is replaced.
•
•
•
쏅
쏅
쏅
Switch-off time (OFF TIMER)
After opening the control panel, the device
is switched off after an adjustable time. You
can set this time from 0 to 30 seconds.
Press the MENU button ;.
Press the or button :repeatedly
until the displays shows "OFF TIMER".
Press the or button 8to open the
menu.
Set the time with the or button 8.
When you have finished making your
changes,
press the MENU button twice ;.
Note:
If you set the switch-off time to 0 sec-
onds, the device is switched off imme-
diately after opening the control panel.
쏅
쏅
쏅
쏅
쏅
Detachable control panel
02_LondonMP37_gb.indd 4402_LondonMP37_gb.indd 44 29.11.2006 16:21:09 Uhr29.11.2006 16:21:09 Uhr

45
ENGLISH
Switching on/off
There are various ways of switching the
device on/off:
Switching on/off using button 2
To switch on the device, press button
2.
The device switches on.
To switch off the device, press and
hold down button 2for longer than
two seconds.
The device switches off.
Switching on/off using the vehicle
ignition
The device will switch on/off simultane-
ously with the ignition if the device is cor-
rectly connected to the vehicle’s ignition as
shown in the installation instructions and
you did not switch the device off by press-
ing button 2.
Switching the device on/off using the
detachable control panel
Detach the control panel.
The devices switches off after the time set
in the "OFF TIMER" menu.
Attach the control panel again.
The device switches on. The last setting
(radio, CD, CD changer or AUX) is reacti-
vated.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
쏅
쏅
쏅
쏅
Adjusting the volume
You can adjust the volume in increments
from 0 (off) to 66 (maximum).
To increase the volume,
turn the volume control 4clockwise.
To decrease the volume,
turn the volume control 4counter-
clockwise.
Setting the power-on volume
Note:
The device features a time-out function
(time window).
For example, if you press the MENU
button ;and select a menu item,
the device switches back after approx.
8 seconds after the last button acti-
vation. The settings performed are
saved.
You can set the power-on volume.
Press the MENU button ;.
Press the or button :repeat-
edly until "ON VOLUME" appears on the
display.
Press the or button 8to open the
menu.
Set the power-on volume with the
or button 8.
To help you adjust the setting more easily,
the device will increase or decrease the vol-
ume as you make your changes.
If you enable "LAST VOL", the volume which
was set the last time you switched off the
device is re-enabled.
쏅
쏅
쏅
쏅
쏅
쏅
Switching on/off Volume
02_LondonMP37_gb.indd 4502_LondonMP37_gb.indd 45 29.11.2006 16:21:09 Uhr29.11.2006 16:21:09 Uhr

46
When you have finished making your
changes,
press the MENU button twice ;.
Telephone Audio/Navigation
Audio
If your car sound system is connected to a
mobile telephone or a navigation system,
the sound system’s volume will be muted as
soon as you "pick up" the phone or as soon
as a navigation announcement is made. You
will then hear the caller or navigation an-
nouncement over the car sound system’s
loudspeakers. In order for this feature to
work, the mobile telephone or navigation
system must be connected to the car sound
system as described in the installation in-
structions.
You can find out from your Blaupunkt dealer
which navigation systems can be used with
your car sound system.
If the sound system receives a traffic an-
nouncement during a telephone call or
whilst a navigation announcement is be-
ing made, you will only be able to hear the
traffic announcement after the call or navi-
gation announcement is finished (in so far
as the traffic announcement is still being
broadcast). The traffic announcement is
not recorded!
You can adjust the volume with which you
switch on the telephone calls or the voice
output of the navigation.
Press the MENU button ;.
Press the or button :repeatedly
until "TEL VOL" appears on the display.
Press the or button 8to open the
menu.
쏅
쏅
쏅
쏅
Note:
To protect your hearing, the power-on
volume is limited to the value "38" for
the setting "LAST VOL". If the volume
was higher before switch-off, the value
is automatically set to "38" at switch-
on. This prevents an unintentionally
and unexpectedly high volume when
switching on the device.
When you have finished making your
changes,
press the MENU button twice ;.
Quickly reducing the volume
(Mute)
You can quickly reduce the volume to a
preset level (Mute).
Briefly press button 2.
"MUTE" appears on the display.
Cancelling mute
To return to your previously set volume
level,
briefly press button 2again.
Adjusting the mute level
You can adjust the mute level.
Press the MENU button ;.
Press the or button :repeat-
edly until "MUTE LVL" appears on the
display.
Press the or button 8to open the
menu.
Set the mute level with the or
button 8.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Volume
02_LondonMP37_gb.indd 4602_LondonMP37_gb.indd 46 29.11.2006 16:21:09 Uhr29.11.2006 16:21:09 Uhr

47
ENGLISH
Set the desired volume with the or
button 8.
When you have finished making your
changes,
press the MENU button twice ;.
Note:
You can use the volume control 4to
adjust the volume of telephone calls
and navigation announcements whilst
you are listening to them.
Switching the confirmation beep
on/off
The system will output a confirmation beep
for some functions if you keep a button
pressed down for longer than two seconds,
for instance, when assigning a radio station
to a station preset button. You can switch
the beep on or off.
Press the MENU button ;.
Press the or button :repeatedly
until "BEEP ON" or "BEEP OFF" appears
on the display.
Switch the BEEP ON or OFF with the
or button 8.
When you have finished making your
changes,
press the MENU button ;.
쏅
쏅
쏅
쏅
쏅
쏅
Radio mode
This device is equipped with an RDS radio
receiver. Manyof thereceivableFM stations
broadcast a signal that not only carries the
programme but also additional information
such as the station name and programme
type (PTY).
The station name appears on the display as
soon as the tuner receives it.
Adjusting the tuner
To ensure proper functioning of the tuner,
the device must be set for the region in
which it is being operated. You can select
among Europe "EUROPE", America "USA",
South America "S-AMERICA", and Thailand
"THAI". The tuner is factory-set to the re-
gion in which it was sold. If you experience
problems with your radio reception, please
check this setting.
The radio functions described in these op-
erating instructions refer to the tuner set-
ting EUROPE.
Switch off the device by pressing but-
ton 2.
Hold the buttons 1and 55pressed at
the same time and switch on the device
again with the button 2.
"TUNER" is displayed.
Select your tuner region with the or
button :.
To save the setting,
switch the device off and on again or
wait approx. 8 seconds. The radio
starts playing with the last setting se-
lected (radio, CD, CD changer or AUX).
쏅
쏅
쏅
쏅
Volume Radio mode
02_LondonMP37_gb.indd 4702_LondonMP37_gb.indd 47 29.11.2006 16:21:09 Uhr29.11.2006 16:21:09 Uhr

48
Switching to radio mode
If you are in CD, CD changer or AUX mode,
press the BAND•TS button =
or
press the SOURCE button 3repeat-
edlyuntilthe memorybank,e.g. "FM1",
appears on the display.
Convenient RDS functions
(AF, REG)
The convenient RDS functions AF
(Alternative Frequency) and REGIONAL ex-
tend your radio’s range of functions.
AF: If the RDS function is activated, the
radio automatically tunes into the best
receivable frequency for the station
that is currently set.
REGIONAL: At certain times, some ra-
dio stations divide their programme
into regional programmes providing
different content. You can use the REG
function to prevent the car radio from
switching to alternative frequencies
that are transmitting different pro-
gramme content.
Note:
REGIONAL must be activated/deacti-
vated separately in the menu.
Switching REGIONAL on/off
Press the MENU button ;.
Press the or button :repeatedly
until "REG" appears on the display.
쏅
쏅
•
•
쏅
쏅
"OFF" or "ON" is displayed alongside "REG".
To switch REGIONAL on/off,
press the or button 8.
When you have finished making your
changes,
press the MENU button ;.
Switching the RDS function on/off
To switch the RDS functions AF and
REGIONAL on or off,
press and hold down the TRAF•RDS
button 7for longer than two sec-
onds.
If the RDS comfort function is active, RDS
appears on the display.
Selecting the waveband/
memory bank
This device can receive programmes broad-
cast over the FM frequency range as well as
the MW and LW (AM) wavebands. There are
three memory banks available for the FM
waveband (FM1, FM2 and FMT) and one
for each of the MW and LW wavebands.
Five stations can be stored in each memory
bank.
To switch between the FM memory banks
(FM1, FM2 and FMT) and the MW and LW
wavebands,
briefly press the BAND•TS button =.
쏅
쏅
쏅
쏅
Radio mode
02_LondonMP37_gb.indd 4802_LondonMP37_gb.indd 48 29.11.2006 16:21:09 Uhr29.11.2006 16:21:09 Uhr

49
ENGLISH
Tuning into a station
There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
Press the or button :.
The radio tunes into the next receivable
station.
Note:
If the priority for traffic information is
active (the display shows the traffic
jam symbol), the next traffic informa-
tion station is set.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manu-
ally if the RDS function is deactivated.
To change the set frequency in small incre-
ments,
briefly press the or button 8.
To change the set frequency quickly,
press and hold down the or button
8for a longer period of time.
Browsing through broadcasting
networks (FM only)
If a radio station provides several pro-
grammes, you have the option of browsing
through its so-called "broadcasting net-
work".
쏅
쏅
쏅
Note:
The convenient RDS function must be
activated before you can use this fea-
ture.
Press the or button 8to switch
to the next station on the broadcasting
network.
Note:
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
receive the stations, use the Scan or
Travelstore function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
Press the MENU button ;.
Press the or button :repeatedly
until "SENS HI" or "SENS LO" appears
on the display.
The display shows the currently set sensi-
tivity level. "SENS HI3" indicates the high-
est sensitivity, "SENS LO1" the lowest.
Set the desired sensitivity with the
or button 8.
When you have finished making your
changes,
press the MENU button ;.
Note:
The device stores the sensitivity value
set in the respective FM and AM wave-
band.
쏅
쏅
쏅
쏅
쏅
Radio mode
02_LondonMP37_gb.indd 4902_LondonMP37_gb.indd 49 29.11.2006 16:21:10 Uhr29.11.2006 16:21:10 Uhr

50
Storing stations
Storing stations manually
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
Tune into the desired station.
Press and hold down one of the station
buttons 1 - 5 5for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the five sta-
tions offering the strongest reception in the
region (FM only). The stations are stored in
the FMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
PressandholddowntheBAND•TSbut-
ton =for longer than two seconds.
Thestoringprocedurebegins."FMTSTORE"
appears on the display. After the process
has completed, the radio will play the sta-
tion that is stored in memory location 1 of
the FMT memory bank.
Note:
If the priority for traffic information is
active (the display shows the traffic
jam symbol), only traffic information
stations are stored.
쏅
쏅
쏅
쏅
Listening to stored stations
Select the memory bank or waveband.
Press one of the station buttons 1 - 5
5.
The stored station is played if it can be
received.
Scanning receivable stations
(SCAN)
You can use the scan function to play all
the receivable stations briefly. You can set
the scanning time in the menu to between
5 and 30 seconds.
Starting SCAN
Press and hold down the MENU button
;for longer than two seconds.
The radio scans the next receivable station.
The current memory bank and "SCAN" ap-
pear briefly on the display followed by a
flashing display of the current station name
or frequency.
Cancelling the SCAN and continuing to
listen to a station
Press the MENU button ;.
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
Press the MENU button ;.
Press the or button :repeat-
edly until "SCAN TIME" appears on the
display.
Press the or button 8to open the
menu.
Set the desired scan time with the
or button 8.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Radio mode
02_LondonMP37_gb.indd 5002_LondonMP37_gb.indd 50 29.11.2006 16:21:10 Uhr29.11.2006 16:21:10 Uhr

51
ENGLISH
When you have finished making your
changes,
press the MENU button twice ;.
Note:
The defined scanning time is also ap-
plied by the system to scanning carried
out in CD and CD changer mode.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they are
broadcasting. Your car radio can receive
and display this information.
For example, the programme types can be:
CULTURE TRAVEL JAZZ
SPORT SERVICE POP
ROCK KNOWLEDGE KIDS
You can use the PTY function to select sta-
tions of a particular programme type.
PTY-EON
If you specify the programme type and start
seek tuning, the radio will switch from the
current station to a station of the selected
programme type.
Notes:
If the tuner does not find a station
that corresponds to the selected pro-
gramme type, you will hear a beep
and "NO PTY" appears briefly in the
display. The radio will then retune to
the station that it received last.
If the tuned radio station or another
station on the broadcasting network
broadcasts your selected programme
type at a later point in time, the radio
쏅
•
•
will automatically switch from the cur-
rently tuned station or from CD mode
or CD-changer mode to the station
whose programme type matches the
one you selected.
If you want to deactivate this PTY
EON switching, you must disable
PTY in the menu with "PTY OFF". In
CD or CD changer mode, the menu
item "PTY ON/ OFF" is not available.
Instead, use the SOURCE button 3
or BAND•TS button =to change to
radio mode first.
Switching PTY on/off
Press the MENU button ;.
Press the or button :repeatedly
until "PTY" appears on the display with
the current setting.
Press the or button 8to switch
PTY ON or OFF.
When you have finished making your
changes,
press the MENU button ;.
Selecting the PTY language
You can select the language for the display
of the programme types. Options include
DEUTSCH, ENGLISH and FRANÇAIS.
Press the MENU button ;.
Press the or button :repeat-
edly until "PTY LANG" appears on the
display.
Press the or button 8to open the
menu.
Set the desired language using the
or buttons 8.
•
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Radio mode
02_LondonMP37_gb.indd 5102_LondonMP37_gb.indd 51 29.11.2006 16:21:10 Uhr29.11.2006 16:21:10 Uhr

52
When you have finished making your
changes,
press the MENU button twice ;.
Selecting a programme type and
starting seek tuning
Press the or button 8.
The current programme type appears on
the display.
If you want to select another pro-
gramme type, you can do so by press-
ing the or button 8whilst this
display is visible.
The selected programme type appears
briefly on the display.
Press the or button :to start
seek tuning.
The radio will then tune into the next station
that it finds that corresponds to your select-
ed programme type.
Optimising radio reception
Treble reduction feature during
interference (High Cut)
TheHighCutfunctionresultsinanimproved
reception in case of weak radio reception
(FM only). If reception interferences are
present, the interference level is automati-
cally reduced.
Switching High Cut on/off
Press the MENU button ;.
Press the or button :repeated-
ly until "HICUT" appears on the display
with the current setting.
쏅
쏅
쏅
쏅
쏅
쏅
Press the or button 8to switch
High Cut on or off.
"HICUT 0" means no automatic reduction of
the interference level, "HICUT 1" means au-
tomatic reduction of the interference level.
When you have finished making your
changes,
press the MENU button ;.
쏅
쏅
Radio mode
02_LondonMP37_gb.indd 5202_LondonMP37_gb.indd 52 29.11.2006 16:21:10 Uhr29.11.2006 16:21:10 Uhr

53
ENGLISH
Traffic information
Your device is equipped with an RDS-EON
receiver. EON (Enhanced Other Network)
ensures that whenever a traffic announce-
ment (TA) is broadcast, the system switch-
es automatically from a station that does
not provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does.
Once the traffic report has been played, the
system will switch back to the programme
that you were listening to before.
Switching traffic information
priority on/off
Press the TRAF•RDS button 7.
Thepriorityfortraffic announcements is ac-
tivated if the display shows the traffic jam
symbol.
Notes:
You will hear a warning beep:
If you leave the reception area of a
traffic information station that you
are currently listening to.
If you leave the reception area of a
traffic information station that the
system is tuned into while you are in
the CD or CD changer mode, and the
subsequent automatic seek tuning
cannot find a new traffic information
station.
If you retune the radio from a traffic in-
formationstation to a station thatdoes
not broadcast traffic information.
If you hear the warning beep, you can ei-
ther switch off traffic information priority
or tune into a station that broadcasts traffic
information.
쏅
•
•
•
Setting the volume for traffic
announcements
Press the MENU button ;.
Press the or button :repeat-
edly until "TA VOLUME" appears on the
display.
Press the or button 8to open the
menu.
Set the volume using the or button
8.
To help you adjust the setting more easily,
the device will increase or decrease the vol-
ume as you make your changes.
When you have finished making your
changes,
press the MENU button twice ;.
Notes:
Using the volume control 4, you can
also adjust the volume during a traf-
fic announcement for the duration of
that announcement.
You can adjust the sound settings
and volume distribution settings for
traffic announcements. For further
information, please read the "Sound"
chapter.
쏅
쏅
쏅
쏅
쏅
•
•
Traffic information
02_LondonMP37_gb.indd 5302_LondonMP37_gb.indd 53 29.11.2006 16:21:10 Uhr29.11.2006 16:21:10 Uhr

54
CD mode
You can use this device to play standard au-
dio CDs, CD-Rs and CD-RWs with a diame-
ter of 12 cm. To avoid problems when play-
ing self-burned CDs, you should not burn
CDs at speeds greater than 16-speed.
Risk of severe damage to the
CD drive!
CD singles with a diameter of 8 cm and non-
circular contoured CDs (shape CDs) must
not be used.
We accept no responsibility for any damage
to the CD drive that may occur as a result of
the use of unsuitable CDs.
To ensure proper functioning, use only CDs
with the Compact-Disc logo. Copy-pro-
tected CDs can cause playback problems.
Blaupunkt cannot guarantee the proper
functioning of copy-protected CDs!
Besides being able to play audio CDs on this
device, you can also play CDs containing
MP3/WMA music files. For further informa-
tion,please readthe chapter entitled"MP3/
WMA mode".
Switching to CD mode
If there is no CD inserted in the drive,
press the button 1.
The control panel opens.
Gently insert the CD with its printed
side uppermost into the drive until you
feel some resistance.
쏅
쏅
The drive draws in the CD automatically.
You must not hinder or assist the drive as it
draws in the CD.
Gently close the control panel whilst
exerting a little pressure until you feel
it click into place.
The CD playback starts and "CD" is shown
on the display.
Note:
If the vehicle ignition was switched
off prior to inserting the CD, you must
switch the device on first with the but-
ton 2to start the playback.
If a CD is already inserted in the drive,
press the SOURCE button 3repeat-
edly until "CD" appears on the display.
Playback begins from the point at which it
was last interrupted.
Selecting tracks
Press an arrow button 8or :to se-
lect the next or previous track.
If you press the button :or button
8once, the player will play the current
track again from the beginning.
Fast track selection
To quickly select tracks backwards or for-
wards,
press and hold down the or button
:until fasttrack selectionbackwards /
forwards begins.
쏅
쏅
쏅
쏅
CD mode
02_LondonMP37_gb.indd 5402_LondonMP37_gb.indd 54 29.11.2006 16:21:11 Uhr29.11.2006 16:21:11 Uhr