Blaupunkt MEMPHIS DJ User manual

Operating instructions
Memphis DJ

3
20
CD-Changer
l mi k
20
Cassette
a c f j ned g hb
20
Radio
16
19
11 12 13 14 15
1823
8 9643
22 1721
102 71
20
5

17
Memphis DJ
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES NEDERLAND
ESPAGÑOL SVENSKA FRANÇAIS
Contents
Important notes ............................ 17
Notes on road safety ......................... 17
Connection ........................................ 17
Telephone operation.......................... 17
KeyCard............................................. 18
Front Panel Description............... 18
Tone control .......................................... 18
Radio operation..................................... 19
Cassette operation................................ 20
CD operation ......................................... 21
External CD player ............................ 21
Notes on operation ...................... 21
Tone control .......................................... 21
The Loudness .................................... 21
Radio operation..................................... 22
Selecting the waveband .................... 22
Selecting a station ............................. 22
Storing a station................................. 22
The mono switching........................... 23
Adjusting the search tuning sensi-
tivity ................................................... 23
Display of station name with Preset
Naming System (PNS) ...................... 24
Cassette operation................................ 24
Inserting/ejecting a cassette .............. 24
Fast winding ...................................... 24
Manual tape selection........................ 25
Dolby-NR ........................................... 25
Track switching.................................. 25
Skipping/repeating music tracks ........ 25
Listening to the radio during fast
winding .............................................. 26
Switching between the audio sources 26
Cassette eject .................................... 26
Care of cassette and car radio .......... 26
Traffic broadcast reception (ARI) .......... 26
Adjusting the priority for ARI
messages .......................................... 26
The ARI alert ..................................... 27
Switching off the ARI alert ................. 27
Adjusting the volume of ARI messages
and ARI alert...................................... 27
ARI messages during cassette
operation............................................ 27
Automatic start of search tuning ........ 27
Selecting the display colour .................. 28
Beep (after key operations)................... 28
Theft protection (KeyCard).................... 28
Optical indication as theft protection.. 28
Appendix....................................... 29
Technical data....................................... 29
What to do if your radio needs to be
serviced................................................. 29
Important notes
Notes on road safety
Being the driver of a motor vehicle you must
direct your full attention on the traffic. Thus
use your car radio set such that you are
alwaysabletocopewiththepresentsituation
on the road.
In critical situations we even advise you to
turn your set off. By all means, inattentions
shouldbeavoided.Please consider that you
you are still moving 14 m per second at a
speed of 50 km/h.
Whenadjustingthevolumepleasepayatten-
tionthatyouarestillabletohear,andreactto,
acoustic warning signals around you.
Connection
Ifyouintendtoinstalltheset byyourself orto
add other audio components to your in-car
equipment, follow the enclosed installation
and connection instructions.
Telephone operation
Whenoperatingacartelephoneinyourvehic-
le, radio or cassette reproduction can be
muted automatically.
Forthis, however,the cartelephonemust be
connected to this radio/cassette combinati-
on.

Memphis DJ
18
KeyCard
This car radio can be operated only with a
KeyCard the code of which is stored in the
set.
Switch the set on with button 1and com-
pletely insert the KeyCard in the predetermi-
ned position E.
If an incorrect KeyCard is inserted, “----” is
indicated in the display.
Insuchacase,carefullyreadtheinstructions
under “Theft protection”.
Never pull out the KeyCard. First push in the
KeyCard (card is transported into playing
position), then remove it.
IfyourKeyCardgetslost ordamaged, oneof
the Blaupunkt service locations will help,
provided you present the car radio passport.
These service locations are marked ( ) in
the car radio service register. If necessary
call the service center of your country for
detailed information about your local service
workshop.
Front Panel Description
Thisquick guideto operationconsistsof four
parts:
Tone control
Radio operation
Cassette operation
CD operation
Twin functions are described separately. All
functionswhichrequiremoreinformationare
additionally described in chapter “Notes on
operation”.
1On/off knob - Scan
On/off
Turn the knob to switch on (“CARD” is
shown in the display). If no KeyCard is
inserted, the set switches off automati-
cally after 10 sec.
To switch on or off, simply insert or
push against the KeyCard.
SCAN
By pressing SCAN, the receivable stati-
ons of the activated waveband (FM,
AM) are searched and played for a
short time.
EInserting the KeyCard
Insert the KeyCard in the direction of
the arrow in the predetermined position.
Push against the card to remove the
KeyCard.
Tone control
1Volume control
2GEO (balance and fader control)
Press button - the display Da shows
BAL (balance) or FAD (fader) and a
number between -9 and +9.
Balance: Use rocker switch << >> G
to adjust the left/right volume.
Fader: Use the rocker switch / F
to adjust the front/rear volume.
3Sound adjustment (TREB, BASS)
TREB - for treble adjustment
Press TREB -
the display Da shows TRE and a
number between -6 and +6. Use the
rocker switch << >> Gto adjust treble.
BASS - for bass adjustment
Press BASS -
the display Da shows BAS and a
number between -7 and +7. Use the
rocker switch << >> Gto adjust bass.

19
Memphis DJ
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES NEDERLAND
ESPAGÑOL SVENSKA FRANÇAIS
The adjustments are finished by pres-
sing BASS, TREB or GEO. Approx. 8
seconds after the last adjustment the
display automatically shows again radio
or cassette functions.
4LD - for Loudness
Loudness - boosts bass at low volume.
Press the LD rocker switch to switch
Loud-ness on/off. If Loudness is on,
“LD” lights in the display Dj.
5DSC - (Direct Software Control)
To adjust the Loudness for example
(see “Notes on operation”).
The chapter “Notes on operation” de-
scribes separately all the basic adjust-
ments which can be set with the DSC
function. This includes the display col-
our, search tuning sensitivity, Loud-
ness, volume of traffic messages, beep
(after key operations) and display of the
station name.
Radio operation
6dx, lo - search tuning sensitivity
Press dx -
“dx” lights in the display Dg.
High search tuning sensitivity; search
tuning stops also at weeker stations.
Stereo programmes are played in ste-
reo.
Press lo -
“lo” lights in the display De.
Normal search tuning sensitivity; se-
arch tuning only stops at stations offe-
ring good reception. Stereo program-
mes are played in stereo.
As the reception conditions can vary
from region to region, the DSC function
allows you to individually store the se-
arch tuning sensitivity (see search tun-
ing sensitivity).
?PS - Preset Station Scan
To scan the stored FM programmes on
all memory banks.
Press PS - the programmes are played
for 8 seconds.
Quit this function by pressing this but-
ton once again.
@Buttons 1, 2, 3, 4, 5, 6 (preset but-
tons)
Storing stations -
Press this button until the set resumes
play.
Recalling stations -
Push button
AAM
Waveband selector for the medium-
frequency band between 531 and
1602 kHz.
BARI
To switch on the priority for ARI traffic
stations.
If “ARI” is in in the display Dh, only
ARI traffic stations in the band between
87.5 and 108 MHz will be received.
The messages are automatically swit-
ched through and the ARI alert is in
standby mode.
Press the ARI button to switch ARI on
and off.
CFM•T
Waveband selector for the FM band
between 87.5 and 108 MHz, selector
for the FM memory banks I-III and T
(Travelstore).

Memphis DJ
20
Six FM stations can be stored on each
memory bank with the help of the but-
tons @. On the Travelstore level “T”
you can automatically store the six
strongest stations of your area.
DDisplay for
a) Frequency, station name, code
b) Wavebands (U=FM, M=AM)
c) FM memory banks (I-III or T)
d) Preset buttons (1-6)
e) lo (normal search tuning sensitivity)
f) Stereo
g) dx (high search tuning sensitivity)
h) ARI (priority of ARI traffic stations)
i) B (Dolby-NR switched on)
j) LD (Loudness switched on)
k) MTL (CrO2and metal cassettes)
l) RM (Radio Monitor switched on)
m) CPS switched on
n) ARI zone ident
F/ Search tuning rocker switch -
station selection
G<< >> Rocker switch for manual tun-
ing.
Cassette operation
7- Dolby-NR*
Press -
Cassettes with Dolby noise reduction
can be played.
On these cassettes background hiss is
much lower and dynamics are better.
*Noise reduction system manufactured under the
licenceofDolbyLaboratories.TheDolbylogoandthe
doubleDareregisteredtrademarksofDolbyLabora-
tories.
8MTL - Metal
Press this button when chromium di-
oxyde (CrO2) or metal cassettes are
played. Switch off this function by pres-
sing MTL once again.
9- Autoreverse
Press button - the other track of the
cassette will be played.
The display Da shows which track is
played.
TR1-PLAY - track A or 1
TR2-PLAY - track B or 2
:Cassette compartment
;Fast winding and cassette eject
FR (Fast rewind) -
Press button for fast rewind. Stop fast
rewind by pressing the FF button.
FF (Fast forward) -
Press button for fast forward. Stop fast
forward by pressing the FR button.
Cassette eject
Press the buttons FR and FF ;simul-
taneously to eject the cassette out of its
compartment.
<RM - Radio Monitor
This function allows to listen to radio
programmes during fast winding of the
cassette. “RM” is indicated in the dis-
play Dl.
=CPS
To repeat or skip music tracks on the
cassette. “CPS” is indicated in the dis-
play Dm.
>SRC - Source
To switch between the audio sources
(cassette radio CD cassette)

21
Memphis DJ
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES NEDERLAND
ESPAGÑOL SVENSKA FRANÇAIS
CD operation
If a Blaupunkt CD Changer without remote
control is connected to this system, the CD
functions can be controlled as follows:
>SRC - Source
Allows to switch to CD Changer opera-
tion. The indicator Da shows the disc/
track display.
1SCAN - On/Off
To scan the CD tracks.
Press SCAN - the tracks are played
one after the other for 10 seconds
each.
“TR” flashes and the track is shown in
the display Da.
Press SCAN once again to quit this
function.
F/Rocker switch to select the
tracks
Upper part depressed
shortly: Skip to next track
more than 1 sec.: Cue
Lower part depressed
shortly: Skip to previous
track
more than 1 sec.: Review
G<< >> Rocker switch to select the CD
Right part depressed - next CD
Left part depressed - previous CD
For further information please see the
operating instructions of your CD chan-
ger.
External CD player
IfanexternalCDplayerisconnected(viaAux
jack), the SRC button >allows to switch
between the audio sources (cassette ra-
dio CD cassette).
The display Da shows “AUX”.
Tone control
The Loudness
Atlowvolumethehumanearislesssensitive
to bass than to medium and higher frequen-
cies. This effect is reduced with increasing
volume.
The Loudness function compensates this
effect. Since the perception of music and
speech depends on the type of the equip-
ment (amplifier), the configuration and type
of the loudspeakers and on the type of the
motor vehicle, the Loudness function has
been made adjustable.
TosettheLoudnessthreshold adjustnormal
volume and follow the steps below:
●Press the DSC button 5.
●Press the rocker switch / Funtil
the display Da shows “Loud” and a
number between 1 and 6.
●Use the search tuning rocker switch <<
>> Gto adjust the Loudness thres-
hold.
●Press the DSC button 5after the ad-
justment.

Memphis DJ
22
Radio operation
Selecting the waveband
FM - with FM-T button C.
AM - with AM button A.
Selecting a station
... using Scan (on/off) 1
If you wish to tune to another station
●press the Scan button 1.
Starting from the currently received radio
programme, the set automatically tunes to
the next station frequencies in upward di-
rectionandplaysthemfor8seconds.During
searchtuning,thedisplayDashows“SCAN”
and while the radio programmes are previe-
wed the station frequency flashes in the
display Da.
To select a scanned station
●press the Scan button 1once again.
The Scan function is switched off.
If you do not select a station, the set plays
againthe radio programmewhichwas tuned
in before Scan was activated.
... using the search tuning rocker switch
Start automatic search tuning
●by pressing the rocker switch / F.
Start search tuning as often as required
until the radio programme of your
choice is tuned in.
If you hold the rocker switch depressed,
search tuning continuous quickly.
... using preset buttons and memory
banks
This function can be used only, if station
frequencies have been stored on the preset
buttons as described in chapter “Storing a
station”.
●To recall FM stations, press the FM•T
button Cuntil the desired memory
bank I, II, III or T is shown in the display
Dc.
●Then press shortly the desired preset
button.
... using Preset Scan (PS) ?
Thisfunction allows you to scan andintrodu-
ce the stored radio programmes of the se-
lectedwaveband(inFMmodeonallmemory
banks I, II, III and T).
This function can be used only, if station
frequencies have been stored on the preset
buttons as described in chapter “Storing a
station”.
●Press PS shortly. The set introduces
the next preset programme.
Theprogrammeofthis station is played for a
shorttime,thenthenextpresetprogrammeis
scanned, etc. If no frequency is stored on a
preset button, this preset is skipped.
Preset Scan can be used on all wavebands.
Assoonasyouhavefoundtheprogrammeof
your choice
●press PS once again. Preset Scan is
switched off.
Storing a station
In the FM mode, six stations can be momori-
zedoneachofthethreememorybanks.Use
the FM•T button Cto select the memory
bank. Another six stations can be stored on
theAM range. Beyond that, thesixstrongest
FM stations can be stored automatically on
the Travelstore bank.
When required, the stored stations can be
recalled by pressing a button.
... using automatic search tuning
If you want to memorize a station frequency
follow the steps below:
●For FM stations, select the memory
bank by pressing the FM•T button C
as often as required. The display Dc
shows I, II, III or T.
To store a station frequency,
●press one of the preset buttons @until
the radio mute is off and the set resu-
mes reproduction of that programme
(after about 2 seconds) to indicate that
the station is stored.

23
Memphis DJ
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES NEDERLAND
ESPAGÑOL SVENSKA FRANÇAIS
The display Dd shows which preset button
is pressed.
Followthesestepsifyouwanttostorefurther
stationsofallwavebandsontheotherpreset
buttons and memory banks.
If the automatic search tuning stops on a
frequency which was already stored before,
then the corresponding preset button will be
indicated for about 5 seconds in the display
Dd together with the memory bank Dc,
but the latter only if it is an FM station.
... using Travelstore
The Travelstore function automatically sto-
resthesixstrongestFMradiostationsofyour
area and sorts them according to their field
strength. This function is helpful, above all,
on long-distance travels.
Tomemorize thesestationswith Travelstore
●press the FM•T button Cfor about 2
seconds.
The radio reproduction is muted until the six
strongest stations are stored.
If required, stations can also be stored man-
ually on the Travelstore bank. The display
shows dashes to indicate the free preset
buttons.
... using manual tuning
If you want to manually tune in and store a
station, use the rocker switch << >> Gto
enter the frequency.
●Use the FM•T Cor AM A button to
select the waveband.
If you wish to store an FM frequency,
●use the FM•T button Cto select the
memory bank.
●Adjust the frequency with the rocker
switch << >> G.
Store the frequency by
●pressing the preset buttons (until the
set resumes play).
In addition to the stored station frequencies,
the stations tuned in last on each waveband
remain stored.
The mono switching
Your car radio is fitted with a Blaupunkt FM
tuner (Codem III) which provides for mostly
undisturbed reception on the road.
In areas with poor reception conditions or
multipathinterferencesduetosignalechoes,
the radio set switches gradually between
stereo and mono. This considerably impro-
ves the on-the-road reception quality.
Toavoidstereonoisecommoninverycritical
reception areas, we recommend to switch to
mono.
To switch between stereo mono
●press lo 6for more than 2 seconds.
In mono mode, the stereo indicator Df
goes off.
Adjusting the search tuning
sensitivity
a) with dx and lo 6.
The adjustment is shown in the display
De and Dg.
lo - Normal search tuning sensitivity
(local)
dx - High search tuning sensitivity (di-
stant)
b) via software with DSC
When the station density is extremely
high or low, it can be useful to separa-
tely adjust the level of the two sensitivi-
ties. For this,
●press the DSC button 5.
Press the rocker switch / F
until “DIS” (sensitivity level dx) or
“LOCAL” (sensitivity level lo) and a
number between 1 and 3 are shown
in the display Da. Use the dx and
lo button 6to switch between LO-
CAL and DIS.

Memphis DJ
24
●Use the rocker switch << >> Gto
adjust the sensitivity:
01 for high sensitivity
03 for normal sensitivity
●Press the DSC button 5after the
adjustment.
Display of station name with
Preset Naming System (PNS)
Ifyouselectastation,thedisplayDashows
the station frequency. Beyond that, this car
radio allows you to change this indication
and, for example, to enter the station name
instead (NDR, BBC, etc.). This is possible
under the following conditions:
Indications of FM and AM stations can only
bechangediftheyarememorizedon theFM
(I, II, III) and AM memory bank, respectively.
Then, however, the zone ident for traffic
information broadcasts (ARI) will not be dis-
played.
●Press the DSC button 5.
●Press the rocker switch / Funtil
“PRESET” shows in the display Da.
●Select the station for which you want to
enter a name.
Thestationfrequencyisshowninthedisplay
Da.Freeentryfieldsarefilledwithdashes.
The first dash flashes. To enter any cha-
racter,
●press the rocker switch << >> G.
The display successively shows a point, the
numbers (0 to 9), the capital letters (A to Z),
the blank and special charactarers (such as
modified vowels and punctuations).
If you want to enter the next character,
●shortly press the on/off button 1.
In order to change the previous character,
●press the on/off button 1for more
than 2 seconds.
Whenyouhavefinishedtheentryandwishto
enterthe name for another station,pressthe
corresponding preset button. The entered
values are stored automatically.
●Press the DSC button 5to quit.
Theentry of thestation name canbecleared
by memorizing another frequency on that
preset button (press the preset button for a
longer time). The display then shows the
frequency of the newly stored station.
Cassette operation
Inserting/ejecting a cassette
●Switch the car radio on.
●Insert the cassette with track A or 1
facing upwards, but do not apply any
force when doing so.
The cassette is played in the direction used
last.
The display Da shows which track is play-
ed.
To eject the cassette, press the FR and FF
button ;simultaneously.
Fast winding
Fast forward
●Press the FF button ;. At the end of
the tape, the set switches to the other
track (autoreverse).
Interrupt fast forward by
●pressing the FR button.
Fast rewind
●Press the FR button ;. At the end of
the tape, the set switches to the other
track.
Interrupt fast rewind
●by pressing the FF button.

25
Memphis DJ
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES NEDERLAND
ESPAGÑOL SVENSKA FRANÇAIS
Manual tape selection
To play METAL or CrO2cassettes
●press MTL 8, “MTL” is shown in the
display Dk.
Pressthisbuttononceagaintoswitchoffthis
function. “MTL” goes off in the display.
Dolby-NR
This tape deck allows to play cassettes
which have been recorded with or without
Dolby-NR.
OncassettesrecordedwithDolby-NR*back-
groundhissismuchloweranddynamicsare
better.
To switch Dolby-NR on/off
●press the rocker switch 7.
“B” lights in the display Dh if Dolby-NR is
switched on.
This function is switched off by pressing the
rockerswitchonceagain.“B”goesoff in the
display.
* Noise reduction system manufactured under license
fromDolbyLaboratories.ThewordDolbyandthedouble
D symbol are the trademarks of Dolby Laboratories.
Track switching
a) Automatically
At the end of the tape, the car radio
switches automatically to the other
track. The other side of the cassette is
played.
b) Manually
Press 9.
The other track of the cassette is play-
ed.
The Display Da changes
(TR1-PLAY TR2-PLAY).
Attention
With stiff cassettes the tape deck may
switch inadvertantly from one track to
the other. Should this happen, check the
tape reel. Winding the cassette may pro-
ve helpful.
Skipping/repeating music tracks
CPSmeansCassetteProgrammeScanand
allowstoskipandrepeatmusictracksonthe
cassette.
●Press CPS =. CPS is shown in the
display Dm.
Toskip amusictrack, thatis, to activatefast
for-warduntil thebeginningof thenexttrack
is reached,
●press the FF button ;for fast for-
ward.
Should you wish to play the track once
again,thatis,toactivatefastrewinduntilthe
beginning of the current track is reached,
●press the FR button ;(fast rewind).
Your can repeat the previous track even if
the next track is already played, but this is
onlypossiblewithinthefirst8secondsofthe
next track. As soon as fast forward or fast
rewind is finished, the next or the previous
music track is played.
The CPS system can be used only, if a
pause of at least 3 seconds is left between
the indiviudal music tracks. Switch this fun-
ctionoffbypressingtheCPSbutton=once
again. “CPS” goes off in the display Dm.

Memphis DJ
26
Listening to the radio during
fast winding
with the RM button (Radio Monitor) <.
During fast winding (and CPS) the unit is
usually muted. Nevertheless you can listen
to the radio
●by pressing RM <, “RM” is shown in
the display Dl.
As soon as fast winding starts, the set plays
the programme of the tuned-in station.
Switch this function off by pressing this
rocker switch once again, “RM” goes off in
the display.
Switching between the audio
sources
(Cassette radio CD cassette) with
the SRC (source) >.
With the cassette inserted
●press the SRC >.
The set switches from cassette operation to
radio or CD mode.
When cassette mode was activated, the
cassettetapeisstopped.Thetapeheadand
thepinchrollersretractinordertoprotectthe
cassetteandthetapedeck(standbymode).
Switch back with the SRC >.
Cassette eject
●Press the FR and FF ;simultaneous-
ly.
Care Notes
We recommend C-60 and C-90 type tapes
for use in any automobile tape player; to
protectyourtapes,storetheminacoolplace
away from dirt, dust, or excessive tempera-
tures above 50°Celsius. In order to ensure
smoothtapeoperation,coldtapesshouldbe
allowed to heat up a bit before they are
played. If dust collects on the audio head or
the rubber roller, problems related to rough
tape operation or poor sound quality may
occur after approx. 100 hours of operation.
For normal contamination, use a head-
cleaning cassette to remove the dust; for
moreintensivecontamination, useacotton-
wooltipsoakedwithalcohol.Neverusehard
tools!
Traffic broadcast
reception (ARI)
Certain FM stations broadcast local traffic
messages from time to time. Besides va-
rious other advantages, the ARI system will
make it easier for you to find these
stations.Trafficinformationbroadcastingsta-
tions can be identified from the ARI zone
ident Dn. The frequencies of regional ARI
traffic information stations are indicated on
the blue motor way signs.
Adjusting the priority for ARI messages
By activating this function, all non-ARI stati-
ons will be muted. ARI can be switched on/
off with the ARI button B. If you wish to
listen to traffic broadcast stations only,
●press the ARI button B.
If the priority for ARI messages is adjusted,
“ARI” is shown in the display Dh.
If your set is tuned to a non-ARI station, the
ARI alert will be released.
●Press the search tuning rocker switch
/ Fto tune to the next traffic bro-
adcast station.

27
Memphis DJ
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES NEDERLAND
ESPAGÑOL SVENSKA FRANÇAIS
Adjusting the volume of ARI
messages and ARI alert
Should you wish to receive traffic informati-
on only, it is possible to reduce the volume
either slightly or totally whilst maintaining
receptionoftrafficmessages.Whenatraffic
message is broadcast, this one is automati-
cally reproduced at the preset volume, alt-
houghyou have previously turned downthe
volume or switched over to cassette opera-
tion.
The preset volume for traffic messages can
be adjusted in line with your particular re-
quirements (e.g. having connected an am-
plifier or in case of a quiet of loud vehicle).
●Press DSC 5.
●The display Da shows ARI and a
number between 1 and 9. Now you
receive the programme with the ad-
justed volume.
●Use the rocker switch << >> Gto cor-
rect your adjustment.
After the adjustment
●press DSC 5.
ARI messages during cassette
operation
This set allows you to listen to a cassette
whilemaintainingreceptionoftrafficmessa-
ges.
When a traffic message is broadcast, cas-
sette playback is stopped and the traffic
message switched through.
Proceed as follows to activate this function:
●Use the ARI button Bto switch on the
ARI priority. “ARI” is shown in the dis-
play Dh if the ARI priority is on.
●Tune to a traffic information station of
your area.
●Insert the cassette into the cassette
compartment. Now you can listen to
cassette playback, which will be inter-
rupted when a traffic message is bro-
adcast.
Automatic start of search tuning
When you leave the coverage area of the
tuned in traffic broadcast station, making
reception difficult, the set automatically tu-
nes to another traffic information station
when cassette operation is activated. Du-
ring seek tuning the ARI alert sounds.
The ARI alert
Precondition: ARI priority is switched on
(ARI lights in the display Dh.
If you leave the coverage area of the traffic
broadcaststation,makingreceptiondifficult,
the ARI alert is released after about 30
seconds.
The ARI alert is released immediately, if a
presetbuttonispressedonwhichanon-ARI
station is stored.
Switching off the ARI alert
a) Tune in another station (with traffic
broadcast) by
●pressing the search tuning rocker
switch or by
●pressing a preset button on which
an ARI station is stored.
b) Switch off the ARI priority by
●pressing the ARI button B.

Memphis DJ
28
Selecting the display colour
With DSC 5the display colour can be
changed from orange to green to adapt it to
the dashboard lighting of your car.
To change the display, proceed as follows:
●Press DSC 5.
●Press the rocker switch / Funtil
“COLOUR” lights in the display.
●Press << >> Gto change the colour.
●Press DSC 5to quit.
Beep (after key operations)
Thiscar radio canreleasea beep toconfirm
those key operations which require more
than2secondsbefore therespective functi-
on is activated. This beep can be switched
on or off.
For this, press the following buttons one
after the other:
●DSC 5.
●Rocker switch / Funtil the display
Da shows “BEEP ON” or “BEEP
OFF”.
●Press the rocker switch << >> Gto
switch between “BEEP ON” and
“BEEP OFF”.
●Press DSC 5to quit.
Theft protection (KeyCard)
This car radio can be operated only with a
KeyCard the code of which is stored in the
set (see figure. page 3).
An unauthorized KeyCard is not accepted
and the set cannot be put into operation.
If an incorrect KeyCard is inserted, “----” is
shown in the display.
The car radio can no longer be operated.
“CARD” flashes after about 10 seconds.
Remove that KeyCard, insert a correct one
and switch the set off and on 1. The car
radio is ready for operation.
However,ifthe four dashes appear again, a
waiting time of 10 seconds is to be kept.
After the fourth erroneous input, the waiting
time extends to 1 hour.
After another 16 incorrect attempts the car
radioneedsto bedecodedbyanauthorized
service location, however, presentation of
the radio passport is a must. If the set is
switched off during the waiting period, the
waiting period commences anew after swit-
ching the set on.
Optical indication as theft protection
Whenyourvehicleisstationary,alightemit-
ting diode can flash as optical warning.
Depending on how your car radio is con-
nected, you can adjust one of the following
three states with DSC 5.
●Press DSC 5.
●Press the rocker switch / Funtil
“LED” and a number is shown in the
display:
LED 1 - The LED flashes, if the car
radio is switched via the igni-
tion.
LED 2 - The LED flashes, if the car
radio is not switched via the
ignition.
LED 0 - The LED diode does not flash.
●Select with << >> G.
●Press DSC 5to quit.

29
Memphis DJ
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES NEDERLAND
ESPAGÑOL SVENSKA FRANÇAIS
Appendix
Technical data
Amplifier
Output power : 2x26Wand2x7Wmax.
output power
2 x 24 W and 2 x 6.5 W
sine acc. to DIN 45324/
3.1 at 2 Ω
FM:
Sensitivity: 0.9 µV at 26 dB S/N ratio
Response: 35-16000 Hz (-3 dB)
Selectivity: >80 dB at ±300 kHz
>40 dB at ±200 kHz
Crosstalk
attenuation: >30 dB at 1 kHz
Cassette
Response: 30-18000 Hz
(-3 dB constant)
Wow/flutter: 0.25 % typ.
S/N ratio 64 dB typ. with Dolby B
56 dB typ. without Dolby
Aux-In: Input impedance 10 kΩ
Preamp-Out: Output impedance 150 Ω
What to do if your radio needs
to be serviced
Whenever your radio fails to operate and
needs to be repaired by an authorized ser-
vicecenter, please donotforget to bringthe
radio passport and the KeyCard along with
you.
Modifications reserved!

17
Memphis DJ
ENGLISH
ITALIANO
PORTUGUES NEDERLAND
ESPAGÑOL SVENSKA FRANÇAIS
Blaupunkt-Werke GmbH
Bosch Telecom
2/93 MC/VKD-Hi 3 D93 147 005 PM