Blaupunkt CD35 7 645 050 510 User manual

Radio / CD
http://www.blaupunkt.com
Kiel CD35 7 645 050 510
Malaga CD35 7 645 060 510
Operating instructions

2
6
9
10
11
3
2
7
4
8
5
1

24
CONTROLS
1Button to switch the device on/
off and operate the volume mute
function.
2SRC button
Short press: Switch sources be-
tween CD, CD changer (if con-
nected) andAUX.
Long press: Briefly display the
clock time.
3button to eject a CD from the
device.
4Volume control
5CD compartment
6TRAF RDS button
Short press: Switch traffic-infor-
mation standby on/off.
Long press: Switch the RDS
function on/off.
7Arrow buttons
8MENU button
Short press: Open the settings
menu.
Long press: Start the scan func-
tion.
9AUDIO button to adjust the
bass, treble, balance and fader.
To select an equalizer preset.
To activate, deactivate and ad-
just the X-BASS function.
:Keys 1- 6
;BND•TS button
Short press: Select the FM
memory banks and the MW and
LW wavebands (MW/LW only on
the Malaga CD35).
Long press: Start the Travelstore
function.

25
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
CONTENTS
Notes and accessories .......... 26
Switching on/off .................... 27
Adjusting the volume............. 28
Setting the power-on volume......... 28
Quick volume reduction (mute) ..... 28
Switching the confirmation beep
on/off ............................................ 29
Mute while telephoning ................. 29
Radio mode............................ 29
Adjusting the tuner settings........... 29
Switching to radio mode ............... 30
RDS functions............................... 30
Selecting the waveband /
memory bank ................................ 30
Tuning into a station ...................... 30
Setting the sensitivity of station
seek tuning ................................... 31
Storing stations............................. 31
Storing stations automatically
(Travelstore).................................. 31
Listening to stored stations ........... 32
Scanning receivable stations
(SCAN)......................................... 32
Setting the scanning time.............. 32
Programme type (PTY) ................. 32
Optimising radio reception............ 34
Configuring the display ................. 34
Traffic information ................. 35
CD mode................................ 36
Switching to CD mode.................. 36
Selecting tracks ............................ 36
Fast track selection....................... 36
Fast searching (audible)................ 36
Random track play (MIX)............... 36
Scanning tracks (SCAN) .............. 37
Repeating tracks (REPEAT) .......... 37
Pausing playback (PAUSE)........... 37
Configuring the display ................. 37
Traffic announcements in CD mode . 37
Ejecting a CD ............................... 38
CD-changer mode ................. 38
Switching to CD-changer mode.... 38
Selecting CDs .............................. 38
Selecting tracks ............................ 38
Fast searching (audible)................ 38
Configuring the display ................. 39
Repeating individual tracks or
whole CDs (REPEAT) ................... 39
Random track play (MIX)............... 39
Scanning all the tracks on all the
CDs (SCAN) ................................ 39
Pausing playback (PAUSE)........... 40
CLOCK time ........................... 40
Displaying the clock time .............. 40
Setting the clock time ................... 40
Selecting 12/24-hour clock mode . 40
Displaying the time continuously
when the device is off and the
ignition is on.................................. 41
Briefly displaying the time when
the device is switched off.............. 41
Sound..................................... 41
Adjusting the bass ........................ 41
Adjusting the treble....................... 41
Setting the left/right volume
distribution (balance)..................... 42
Adjusting the front/rear volume
distribution (fader)......................... 42
Equalizer presets .......................... 42
X-BASS .................................. 43
Configuring the level display . 43
External audio sources.......... 44
Specifications ........................ 44

26
Notes and accessories
Thank you for choosing a Blaupunkt
product. We hope you enjoy using this
new piece of equipment.
Please read these operating instruc-
tions before using the equipment for
the first time.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the device,
please contact your dealer or the tele-
phone hotline for your country. You will
find the telephone number printed at the
back of this booklet.
We provide a manufacturer guarantee
on our products bought within the Eu-
ropean Union. You can view the guar-
antee conditions at www.blaupunkt.de
or ask for them directly at:
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
D-31139 Hildesheim
Gerrmany
NOTES AND ACCESSORIES
Road safety
Road safety has absolute prior-
ity. Only operate your car sound sys-
tem if the road and traffic conditions
allow you to do so. Familiarise your-
self with the device before setting off
on your journey.
You must always be able to hear
police, fire service and ambulance
sirens in good time from inside your
vehicle. For this reason, listen to your
car sound system at a moderate vol-
ume level during your journey.
Installation
If you want to install your car sound sys-
tem yourself, please read the installa-
tion and connection instructions that
follow these operating instructions.
Accessories
Only use accessories approved by Blau-
punkt.
Remote control
The RC 08 or RC 10 (available as op-
tional accessories) remote control al-
lows you to access the most important
functions of your car sound system safe-
ly and conveniently from your steering
wheel.
You cannot switch the device on/off us-
ing the remote control.
Amplifiers
You can use all Blaupunkt and Velocity
amplifiers.
CD changers
You can connect the following Blaupunkt
CD changers: CDC A 08, IDC A 09 and
CDC A 03.
02Kiel_Malaga CD35 gb® 27.06.2005, 15:12 Uhr26

27
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Note:
●If the vehicle ignition was switched
off before you inserted the CD, you
will first have to switch on the de-
vice by pressing button 1in order
to start playing the CD.
Switching on/off
You can switch the device on/off in the
following ways:
Switching on/off using the vehicle
ignition
If the device is correctly connected to
the vehicle’s ignition and it was not
switched off using button 1, it will
switch on/off simultaneously with the
ignition.
Switching on/off using button 1
➮To switch on the device, press but-
ton 1.
➮To switch off the device, press and
hold down button 1for longer
than two seconds.
The device switches off.
Note:
●To protect the vehicle battery, the
device will switch off automatically
after one hour if the ignition is off.
Switching on by inserting a CD
If the device is switched off and there is
no CD present in the drive,
➮gently push the CD with its printed
side uppermost into the drive 5
until you feel some resistance.
The drive draws in the CD automatical-
ly.
You must not hinder or assist the drive
as it draws in the CD.
Thedeviceswitchesonandstartsplay-
ing the CD.
SWITCHING ON/OFF

28
Adjusting the volume
Youcanadjustthevolumeinstepsfrom
0 (off) to 66 (maximum).
To increase the volume,
➮turn the volume control 4clock-
wise.
To decrease the volume,
➮turn the volume control 4anti-
clockwise.
Setting the power-on volume
Note:
●The device is equipped with a time-
out function. If, for instance, you
press the MENU button 8and se-
lect a menu item, the device will
switch back approx. 8 seconds af-
ter the last button was pressed.
Any changes to the settings that
you have made will be saved.
You can set the power-on volume.
➮Press the MENU button 8.
➮Press the or button 7repeat-
edly until “ON VOLUME” appears
in the display.
➮Adjust the power-on volume using
the buttons 7.
To helpyouadjustthesettingmoreeas-
ily, the device will increase or decrease
thevolumeasyoumakeyourchanges.
Ifyouchangethesettingto“LASTVOL”,
the volume level that was set the last
time you switched off the device will be
activated again.
Note:
●To protect your hearing, the power-
on volume is limited to a value of
“38”. If the volume level was higher
than this when the device was last
switched off and the “LAST VOL”
setting is activated, the system will
reset the volume to “38” when you
switch the device on again.
When you have finished adjusting the
setting,
➮press the MENU button 8twice.
Quick volume reduction (mute)
You can quickly decrease the volume
(mute) to a level preset by you.
➮Briefly press button 1.
“MUTE” appears in the display.
Cancelling mute
To return to your previously set volume
level,
➮briefly press button 1again.
Setting the mute level
You can adjust the mute level.
➮Press the MENU button 8.
➮Press the or button 7repeat-
edly until “MUTE LVL” appears in
the display.
➮Adjust the mute level using the
buttons 7.
When you have finished adjusting the
setting,
➮press the MENU button 8twice.
ADJUSTING THE VOLUME

29
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Switching the confirmation beep
on/off
Thesystemwillplayaconfirmationbeep
for some functions if you keep a button
pressed down for longer than two sec-
onds, for instance, when you assign a
radiostationtoastationbutton.Youcan
switch the beep on/off.
➮Press the MENU button 8.
➮Press the or button 7repeat-
edly until “BEEP ON” or “BEEP
OFF” appears in the display.
➮Adjust the beep setting using the
buttons 7. “OFF” means the
beep is switched off and “ON”
means the beep is switched on.
When you have finished adjusting the
setting,
➮press the MENU button 8.
Mute while telephoning
If your device is connected to a mobile
telephone, the car radio’s volume will
be muted as soon as you “pick up” the
telephone. This requires that the mo-
bile telephone be connected to the de-
vice as described in the installation in-
structions.
“PHONE” appears in the display.
ADJUSTING THE VOLUME
Radio mode
This device is equipped with an RDS
radio receiver. Many of the receivable
FM stations broadcast a signal that not
only carries the programme but also
additional information such as the sta-
tion name and programme type (PTY).
The station name appears in the dis-
play as soon as the tuner receives it.
Adjusting the tuner settings
To ensure that the tuner works proper-
ly,thedevicemustbeconfiguredforthe
regioninwhichyouareusingit.Youcan
choose between Europe (EUROPE),
UnitedStates(USA),SouthAmerica(S-
AMERICA) and Thailand (THAI). By
default, the tuner is set to the region in
which the device was sold. If you en-
counter problems with radio reception,
please check this setting.
The radio functions described in these
operating instructions refer to the EU-
ROPE tuner setting.
➮Press and hold down the 1and 5
buttons :simultaneously and
switch on the device again by
pressing button 1.
“TUNER” is displayed.
➮Select your tuner region using the
or button 7.
To save the setting,
➮switch the device off and on again
or wait approx. 8 seconds. The car
sound system starts with the last
setting activated (radio, CD, CD
changer orAUX).
RADIO MODE

30
Switching to radio mode
If you are in CD, CD-changer or AUX
mode,
➮press the BND•TS button ;
or
➮press the SRC button 2re-
peatedly until the memory bank
(e.g. “FM1”) appears in the display.
RDS functions
The convenient RDS functions AF (Al-
ternative Frequency) and REGIONAL
extend your radio’s range of functions.
●AF: If the RDS function is activat-
ed, the radio automatically tunes
into the best receivable frequency
for the station that is currently set.
●REGIONAL:At certain times, some
radio stations divide their pro-
gramme into regional programmes
providing different content. You can
use the REG function to prevent
the car radio from switching to al-
ternative frequencies that are
broadcasting different programme
content.
Note:
●REGIONAL must be activated/de-
activated separately in the menu.
Switching the RDS function on/off
If you want to use the RDS functions
(AF and REGIONAL),
➮press and hold down the TRAF
RDS button 6for longer than two
seconds.
The RDS function is active when an
RDS symbol lights up in the display.
Switching REGIONAL on/off
➮Press the MENU button 8.
➮Press the or button 7repeat-
edly until “REG” appears in the dis-
play. “OFF” or “ON” is displayed
alongside “REG”.
➮To switch REGIONAL on/off, press
the or button 7.
➮Press the MENU button 8.
Selecting the waveband /
memory bank
This device can receive programmes
broadcastovertheFMfrequencyrange
as well as the MW and LW (AM) wave-
bands (MW and LW only on the Mala-
ga CD35). There are three memory
banks available for the FM waveband
(FM1, FM2 and FMT) and one for each
ofthe MWand LWwavebands. Sixsta-
tions can be stored in each memory
bank.
To switch between the FM memory
banks (FM1, FM2 and FMT) and the
MW and LW wavebands,
➮briefly press the BND•TS button
;.
Tuning into a station
There are various ways of tuning into a
station.
Automatic station seek tuning
➮Press the or button 7.
The radio tunes into the next receiva-
ble station.
RADIO MODE

31
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Tuning into stations manually
You canalso tuneinto stationsmanual-
ly.
Note:
●You can only tune into stations
manually if the RDS function is de-
activated.
➮Press the or button 7.
Browsing through broadcasting
networks (only FM)
If radio stations provide several pro-
grammes,youhavetheoptionofbrows-
ing through their “broadcasting net-
works”.
Note:
●The RDS function must be activat-
ed before you can use this feature.
➮Press the or button 7to
switch to the next station on the
broadcasting network.
Note:
●When using this feature, you will
only be able to switch to stations
that you have received once before
already. To receive the stations,
use the scan function or the Travel-
store function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
➮Press the MENU button 8.
➮Press the or button 7repeat-
edly until “SENS” and the currently
set value appear in the display.
“SENS HI6” means that the tuner is set
tothehighestsensitivitysetting.“SENS
LO1” means it is set to the lowest sen-
sitivity setting.
➮Set the desired sensitivity using the
buttons 7.
When you have finished adjusting the
setting,
➮press the MENU button 8.
Note:
●You can set different sensitivity
levels for FM and MW or LW (AM)
(MW/LW only on the Malaga
CD35).
Storing stations
Storing stations manually
➮Select the memory bank that you
want (FM1, FM2, FMT) or one of
the wavebands (MW or LW) (MW/
LW only on the Malaga CD35).
➮Tune into the station that you want.
➮Press and hold down one of the
station buttons 1 - 6 :for longer
than two seconds to assign the sta-
tion to that button.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tionsproviding the best reception in the
region(onlyFM).Thestationsarestored
in the FMT memory bank.
RADIO MODE

32
Note:
●Any stations previously stored in
this memory bank are deleted in
the process.
➮Press and hold down the BND•TS
button ;for longer than two sec-
onds.
The storing procedure begins. “FM
TSTORE” appears in the display. After
the process has completed, the radio
will play the station that is stored in
memory location 1 of the FMT memory
bank.
Listening to stored stations
➮Select the memory bank or wave-
band.
➮Press the station button 1 - 6 :
that corresponds to the station that
you want to listen to.
Scanning receivable stations
(SCAN)
You can use the scan function to listen
toall the receivable stationsbriefly.You
can set the scanning time in the menu
to between 5 and 30 seconds (in steps
of 5 seconds).
Starting SCAN
➮Press and hold down the MENU
button 8for longer than two sec-
onds.
Scanning begins. “SCAN” appears
brieflyinthedisplayfollowedbyaflash-
ing display of the current station name
or frequency.
Cancelling SCAN and continuing
listening to a station
➮Press the MENU button 8.
Scanningstopsandtheradiocontinues
playingthestationthatittuned intolast.
Setting the scanning time
➮Press the MENU button 8.
➮Press the or button 7repeat-
edly until “SCAN TIME” appears in
the display.
➮Set the desired scanning time us-
ing the buttons 7.
When you have finished adjusting the
setting,
➮press the MENU button 8twice.
Note:
●The scanning time that you set is
also used when scanning in CD
mode and in CD-changer mode.
Programme type (PTY)
Besides transmitting the station name,
someFMstationsalsoprovideinforma-
tion on the type of programme they are
broadcasting.Yourcarradiocanreceive
and display this information.
Forexample,theprogrammetypescan
be:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK CLASSICS
You can use the PTY function to select
stationsofaparticularprogrammetype.
RADIO MODE

33
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
PTY-EON
If you specify the programme type and
start seek tuning, the radio will switch
from the current station to a station of
the selected programme type.
Note:
●If the tuner does not find a station
that matches the selected pro-
gramme type, you will hear a beep
and “NO PTY” appears briefly in
the display. The radio will then re-
tune to the station that it received
last.
●If the tuned radio station or another
station on the broadcasting net-
work broadcasts your selected pro-
gramme type at a later point in
time, the radio will automatically
switch from the currently tuned sta-
tion or from CD mode or CD-
changer mode to the station whose
programme type matches the one
you selected.
Switching PTY on/off
➮Press the MENU button 8.
➮Press the or button 7repeat-
edly until “PTY ON” or “PTY OFF”
appears in the display.
➮Press the or button 7to
switch PTY ON or OFF.
➮Press the MENU button 8.
Selecting the PTY language
You can select the language in which
the programme types are displayed.
The following are available:
“DEUTSCH”, “ENGLISH” and
“FRANÇAIS”.
➮Press the MENU button 8.
➮Press the or button 7repeat-
edly until “PTY LANG” appears in
the display.
➮Set your preferred language using
the buttons 7.
When you have finished adjusting the
setting,
➮press the MENU button 8twice.
Selecting a programme type and
starting seek tuning
➮Press the or button 7.
The current programme type appears
in the display.
➮If you want to select another pro-
gramme type, you can do so by
pressing the or button 7
whilst this display is visible.
The selected programme type appears
briefly in the display.
➮Press the or button 7to start
seek tuning.
The radio will then tune into the next
stationitfindsthatmatchesyourselect-
ed programme type.
RADIO MODE

34
Optimising radio reception
HICUT
TheHICUTfunctionimprovesreception
during poor radio reception (only FM).
If interference occurs, the interference
level is cut automatically.
Switching HICUT on/off
➮Press the MENU button 8.
➮Press the or button 7repeat-
edly until “HICUT” appears in the
display.
➮Press the or button 7to ad-
just the HICUT setting.
“HICUT 0” means that the interference
level will not be cut automatically. “HI-
CUT 1” means that it will be cut auto-
matically.
➮Press the MENU button 8.
Configuring the display
In radio mode you have the option of
displaying the waveband together with
thememorybank/memorylocationand
the time or the station name / frequen-
cy of the current station.
Select “FREQUENCY” to display the
station name / frequency or select
“CLOCK” to display the waveband to-
getherwith the memory bank /memory
location and the clock time.
➮Press the MENU button 8.
➮Press the or button 7repeat-
edly until “TUN DISP” appears in
the display.
➮Press the or button 7to
switch between “CLOCK” and
“FREQUENCY”.
➮Press the MENU button 8twice.
RADIO MODE

35
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Traffic information
Your device is equipped with an RDS-
EON receiver. EON stands for En-
hanced Other Network.
Whenever a traffic announcement (TA)
is broadcast, the system switches au-
tomatically from a station that does not
provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does.
Oncethetrafficreporthasbeenplayed,
the system will switch back to the pro-
gramme you were listening to before.
Switching traffic information
priority on/off
➮Briefly press the TRAF button 6.
Traffic announcement priority is active
when the traffic-jam symbol lights up in
the display.
Note:
You will hear a warning beep:
●if you leave the reception area of a
traffic information station that you
are currently listening to.
●if you are receiving a traffic infor-
mation station and the volume is
set to minimum (0) or if, whilst lis-
tening to a CD, a CD in the chang-
er or anAUX source, you leave the
reception area of the tuned traffic
information station and the subse-
quent automatic search cannot find
a new traffic information station.
●if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
If you hear the warning beep, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Setting the volume for traffic
announcements
➮Press the MENU button 8.
➮Press the or button 7repeat-
edly until “TA VOLUME” appears in
the display.
➮Adjust the volume using the
buttons 7.
When you have finished adjusting the
setting,
➮press the MENU button 8twice.
Notes:
●You can use the volume control 4
to adjust the volume during a traffic
announcement for the duration of
that announcement.
●You can set the volume distribution
for the traffic announcements. For
further details, please read the
“Sound” chapter.
TRAFFIC INFORMATION

36
If there is already a CD inserted in the
drive,
➮press the SRC button 2re-
peatedly until “CD” appears in the
display.
Playbackbeginsfromthepointatwhich
it was last interrupted.
Selecting tracks
➮Press one of the arrow buttons 7
to select the next or previous track.
If you press the or button 7once,
the current track will be played again
from the beginning.
Fast track selection
For fast track selection (backwards or
forwards),
➮press and hold down one of the /
buttons 7until fast-reverse /
fast-forward track selection begins.
Fast searching (audible)
For fast searching (backwards or for-
wards),
➮press and hold down one of the
buttons 7until fast searching
backwards / forwards begins.
Random track play (MIX)
➮Press the 5MIX button :.
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
CD mode
You can use this device to play stand-
ard audio CDs, CD-Rs and CD-RWs
with a diameter of 12 or 8 cm.
Risk of severe damage to the
CD drive!
ContouredCDs(shapeCDs)arenot
suitable for playback in this unit. We
do not accept responsibility for any
damage to the CD drive that may
occur as a result of the use of un-
suitable CDs.
To ensurethesystemfunctionsproper-
ly, only use CDs labelled with the com-
pact disc logo. Problems might be ex-
perienced when playing copy-protect-
ed CDs. Blaupunkt cannot guarantee
the proper functioning of copy-protect-
ed CDs!
Switching to CD mode
If there is no CD inserted in the drive,
➮Gently push the CD with its printed
side uppermost into the drive 5
until you feel some resistance.
The drive draws in the CD automatic-
ally.
You must not assist or hinder the drive
as it draws in the CD.
The CD starts playing.
Note:
●If the vehicle ignition was switched
off before you inserted the CD, you
will first have to switch on the de-
vice by pressing button 1in order
to start playing the CD.
CD MODE

37
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
“RPT OFF” appears briefly in the dis-
play and the RPT symbol disappears.
Normal playback is then resumed.
Pausing playback (PAUSE)
➮Press button 3:.
“PAUSE” appears in the display.
Cancelling pause
➮Press button 3:whilst pause
is activated.
Playback is resumed.
Configuring the display
You can choose between two display
types for CD mode:
●Track number and clock time
●Track number and playing time
➮Press the MENU button 8.
➮Press the or button 7repeat-
edly until “CD DISP” appears in the
display.
➮Press the or button 7to
switch between “PLAY TIME” and
“CLOCK”.
➮Press the MENU button 8twice.
Traffic announcements in CD
mode
If you wish to receive traffic announce-
ments whilst CD mode is activated,
➮press the TRAF button 6.
Traffic announcement priority is active
when the traffic-jam symbol lights up in
the display. For further details, please
read the “Traffic information reception”
chapter.
Cancelling MIX
➮Press the 5MIX button :again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
Scanning tracks (SCAN)
Youcan scan(brieflyplay)allthetracks
on the CD.
➮Press and hold down the MENU
button 8for longer than two sec-
onds.
The next track will then be scanned.
Note:
●You can set the scanning time. For
further details, please read the sec-
tion entitled “Setting the scanning
time” in the “Radio mode” chapter.
Cancelling SCAN and continuing
listening to a track
➮To cancel scanning, press the
MENU button 8.
The currently scanned track will then
continue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
➮press the 4RPT button :.
“RPT TRCK” appears briefly in the dis-
playand the RPTsymbol lights up.The
track is repeated continuously until you
deactivate RPT.
Cancelling REPEAT
If you want to cancel the repeat func-
tion,
➮press the 4RPT button :again.
CD MODE

38
Ejecting a CD
➮Press the eject button 3next to
the CD compartment.
The CD is ejected.
➮Remove the CD.
Note:
●If a CD is ejected, the drive will au-
tomatically draw it back in again af-
ter approx. 10 seconds.
●You can also eject CDs whilst the
device is switched off or whilst an-
other audio source is activated.
CD MODE
CD-changer mode
Note:
●Information on handling CDs, in-
serting CDs and operating the CD
changer can be found in the oper-
ating instructions supplied with
your CD changer.
Switching to CD-changer mode
➮Press the SRC button 2re-
peatedly until “CHANGER” ap-
pears in the display.
The device starts playing the first CD
that the CD changer detects.
Selecting CDs
To move up or down to another CD,
➮press the or button 7once or
several times.
Note:
●The device will ignore empty CD
slots in the changer and slots con-
taining invalid CDs.
Selecting tracks
To move up or down to another track
on the current CD,
➮press the or button 7once or
several times.
Fast searching (audible)
For fast searching (backwards or for-
wards),
➮press and hold down one of the
buttons 7until fast searching
backwards / forwards begins.
CD-CHANGER MODE

39
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Configuring the display
There are five display options available
for CD-changer mode:
●Track number and playing time
(“TRCK-TIME”)
●Track number and clock time
(“TRCK-CLK”)
●CD number and track number
(“CD-TRCK”)
●CD number and clock time
(“CD-CLK”)
●CD number and playing time
(“CD-TIME”)
➮Press the MENU button 8.
➮Press the or button 7repeat-
edly until “CDC DISP” appears in
the display.
➮Press the or button 7repeat-
edly until the option that you want
is displayed.
➮Press the MENU button 8twice.
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
➮briefly press the 4 RPT button :.
“RPT TRCK” appears briefly and RPT
lights up in the display.
To repeat the current CD,
➮press and hold down the 4 RPT
button :for longer than two sec-
onds.
“RPT DISC” appears briefly and RPT
lights up in the display.
Cancelling REPEAT
To stop the current track or current CD
from being repeated,
➮briefly press the 4 RPT button :.
“RPT OFF” appears and RPT disap-
pears from the display.
Random track play (MIX)
To play the tracks on the current CD in
random order,
➮briefly press the 5MIX button :.
“MIXCD”appearsbrieflyandMIXlights
up in the display.
To playthetracksonalltheinsertedCDs
in random order,
➮press and hold down the 5MIX
button :for longer than two sec-
onds.
“MIXALL”appearsbrieflyandMIXlights
up in the display.
Cancelling MIX
➮Briefly press the 5MIX button :.
“MIXOFF”appearsandMIXdisappears
from the display.
Scanning all the tracks on all the
CDs (SCAN)
To scan (briefly play) all the tracks on
alltheinsertedCDsinascendingorder,
➮press and hold down the MENU
button 8for longer than two sec-
onds.
“TRKSCAN”appearsinthedisplayand
thenumber of the currenttrackflashes.
CD-CHANGER MODE

40
Cancelling SCAN
To stop scanning,
➮briefly press the MENU button 8.
The currently scanned track will then
continue to be played normally.
Note:
●You can set the scanning time. For
further details, please read the sec-
tion entitled “Setting the scanning
time” in the “Radio mode” chapter.
Pausing playback (PAUSE)
➮Press button 3:.
“PAUSE” appears in the display.
Cancelling pause
➮Press button 3:whilst pause
is activated.
Playback is resumed.
CLOCK time
Displaying the clock time
To display the clock time briefly,
➮Press and hold down the SRC
button 2until the clock time ap-
pears in the display.
Setting the clock time
To set the clock time,
➮press the MENU button 8.
➮Press the or button 7repeat-
edly until “CLOCK SET” appears in
the display.
➮Press the button 7.
The clock time appears in the display.
The hours flash and can be adjusted.
➮Adjust the hours using the /but-
tons 7.
Once the hours are set,
➮press the button 7.
The minutes flash.
➮Adjust the minutes using the /
buttons 7.
➮Press the MENU button 8twice.
Selecting 12/24-hour clock
mode
➮Press the MENU button 8.
“MENU” appears in the display.
➮Press the or button 7repeat-
edly until “24 H MODE” or “12 H
MODE” appears in the display.
➮Press the or button 7to
switch between the modes.
CD-CHANGER MODE CLOCK TIME

41
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
When you have finished adjusting the
setting,
➮press the MENU button 8.
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is
off and the vehicle ignition is on,
➮press the MENU button 8.
“MENU” appears in the display.
➮Press the or button 7repeat-
edly until “CLOCK OFF” or
“CLOCK ON” appears in the dis-
play.
➮Press the or button 7to
switch between the ON/OFF set-
tings.
When you have finished adjusting the
setting,
➮press the MENU button 8.
Briefly displaying the time when
the device is switched off
To display the time briefly when the de-
vice is off,
➮press the SRC button 2.
Thetimeisdisplayedforeightseconds.
Sound
Youcanadjustthesoundsettings(bass
and treble) separately for each source
(radio, CD and CD changer /AUX).
The volume distribution settings (bal-
ance and fader) apply to all the audio
sources (except for traffic announce-
ments).
You can only adjust the balance and
fadersettingsfortrafficannouncements
whilst a traffic announcement is actu-
ally being played.
Adjusting the bass
➮Press the AUDIO button 9.
“BASS” appears in the display.
➮Press the or button 7to ad-
just the bass.
When you have finished adjusting the
setting,
➮press the AUDIO button 9.
Adjusting the treble
➮Press the AUDIO button 9.
“BASS” appears in the display.
➮Press the button 7repeatedly
until “TREBLE” appears in the dis-
play.
➮Press the or button 7to ad-
just the treble.
When you have finished adjusting the
setting,
➮press the AUDIO button 9.
CLOCK TIME SOUND