BLAUX 30773 User manual

USER
MANUAL
Now, you and your loved ones can easily
navigate your home and conserve energy.
Kindly read this user manual carefully before
using your new Motion Sensor Lights. Make sure
to keep this document for future reference.
The Blaux Rechargeable Motion Sensor Lights use
built-in detectors and LEDs to effectively illuminate
entryways, rooms, and even exterior areas. These
lights can run for up to 11 hours on a single charge,
giving you maximum efficiency.
• Detection Distance: 10 to 26 feet (3 to 8 meters)
• Detection Angle: 120°
• Number of LED Beads: 10
• LED Life: More than 80,000 hours
• LED Brightness: 1800 - 2000 MCD/piece
• Luminous Angle: 120°
• LED Color: Warm white
• Standby Current: 39 mA
• Operating Current: 70 mA
• Power Supply: 350 mAh lithium battery
• Auto Shutoff Time: 15 seconds
• Product Size: 188 x 30 x 15 mm
• Storage Temperature: 14 - 104 °F (–10 - 40 °C)

1. To charge your Motion Sensor Lights, simply use
the included Micro USB cable. Your lights will be
able to run for up to 11 hours on a single charge.
2. Attach the magnetic tape onto the desired
surface (e.g. near a doorway, inside your garage,
along your exterior walls). Then, attach the Blaux
Motion Sensor Lights to the magnetic tape.
3. The lights will automatically turn on when
movement is detected within a 10-26 foot range.
They will switch off 15 seconds after you leave the
room or when no movement is detected.
Note: The lights will only work if the area is dark. If
there is another light source, the Blaux Motion
Sensor Lights will not switch on, even if movement
is detected.
1 x Blaux Motion Sensor Light
1x Micro USB Cable
1x Magnetic sticker
1 x User Manual
1. When plugged in, a red LED will glow. When your
lights are done charging, the LED will turn green.
2. Do NOT expose the lights to extreme
temperatures (below 14 °F or above 104 °F).
3. Do NOT expose your Blaux Motion Sensor Lights
to overly damp conditions (ie. bathrooms) or
immerse in water.
Thank you for choosing Blaux!
Have questions about our products? You can
contact our helpful customer service team by going
to support.blauxstore.com or by scanning the QR
code below. We’re always happy to help!