Blinds To Go Valance User manual

Valance Installation Guide
Important: read this guide BEFORE reading the
installation guide for your blind or shade
BTG 468389 REV0610_en
Majestic Valance Double Majestic Valance
Royal Valance

Assembling Your Valance
Parts
For All Types of Valances
1
Valance Support Bracket Valance Support Bracket
Quantity: 2 or more depending Quantity: 2 or more depending
on size of valance on size of valance
or
Majestic Valance
(only for Double Majestic Valance)
Lower Section
Valance Returns
Quantity: 2
Lower Section
Support Brackets
Quantity: 2 or more
depending on size of valance
Corner Pieces Corner Covers Valance Returns Valance Clips
Quantity: 2, or 4 for Quantity: 4, or 6 for Quantity: 2 Quantity: 2 or more
Double Majestic Valance Double Majestic Valance depending on size of valance
Corner Pieces Corner Covers Valance Returns Valance Clips
Quantity: 2 Quantity: 4 Quantity: 2 Quantity: 2 or more depending
on size of valance
Royal Valance

Step 1. Slide in valance insertion
Slide the valance insertion through the main valance section. For a Double Majestic Valance, slide the
valance insertion for both the main section and the lower section.
2
Royal Valance Majestic Valance
lower section
support bracket
Step 2. Only for Double Majestic Valance: Attach the lower section
1. Slide all but two of the lower section support brackets into the main valance section and space
them evenly (
Fig. A ).
2. Attach the lower section to the main section by sliding the lower section through the lower
section support brackets (
Fig. B ).
Note: If the material is too thick to slide in, pop the insertion into the main valance section. Take
precaution not to break the material while bending the insertion.
(Fig. A) (Fig.B)
main section
lower section

Step 3. Assembe the valance returns
1. Slide the corner pieces into the back slot of the main valance section.
2. Insert the valance returns into the corner pieces.
Note:
1. For fabric valance insertion, wrap the excess around the back of each return and hold the fabric inser-
tion in place with household tape.
2. For PVC or aluminum insertion, trim off the excess with a utility knife by scoring the back of the insertion
and snap it off.
Royal Valance
3
Majestic Valance
➔➔
➔➔
Royal Valance Majestic Valance
Important for Double Majestic Valances: assemble the returns of the lower section BEFORE
you assemble the returns of the main section.

4
3. For Royal and Majestic valance: Insert the four plastic top and bottom corners and push to secure
entire valance.
4. Only for Majestic valance: Secure the top and bottom colored trims by pressing into the grooves of the
corners and of the valance returns. Trim off any excess using ordinary scissors.
5. Only for Double Majestic Valance: Secure the returns of the lower section
.
Slide the two remaining
lower section support brackets in position to secure the returns of the lower section (
Fig. B ).
Royal Valance Majestic Valance
lower section
main section
(Fig. B)
back view

Mounting your valance (hardwares for a horizontal blind are illustrated)
Note: When necessary, the top of the valance can be trimmed down with a utility knife by scoring the back
of it and snap the excess off.
Inside mount (blind/shade is mounted into the ceiling, or inside the window frame into the top of the
frame)
Using regular brackets: Valance is screwed into the mounting
surface TOGETHER with the mounting brackets
1. Determine position of the mounting brackets as instructed
in the installation guide for your blind/shade. Match the
position of brackets on the valance.
2. Drill holes into the valance and the mounting surface.
Then place the mounting brackets in position and screw
the valance into the mounting surface.
ceiling or
top of
window
frame
5
mounting bracket
mounting bracket
valance support
bracket
Using Box Brackets: Valance rests on headrail or track of blind
1. Cut the top of the valance to allow clearance for mounting brackets
2. Fit valance over headrail/track of blind/shade.
Outside mount (blind/shade is mounted on the window frame or wall)
Place completely assembled valance into the bracket lips of the valance support brackets and push in.
The valance should rest on the brackets.