Blizzard Lighting STILETTO I7 User manual

Blizzard Lighting, LLC
www.blizzardlighting.com
Waukesha, WI USA
Copyright (c) 2016

Page 2
Stiletto™ I7 User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC
TABLE OF CONTENTS
Stiletto™ I7 Moving Head 1
1. Getting Started 3
What’s In The Box? 3
Getting It Out Of The Box 3
Powering Up! 3
Getting A Hold Of Us 3
Safety Instructions (Don’t Stick Your Hand In The Toaster!) 4
2. Meet The Stiletto™ I7 Moving Head 5
Features 5
DMX Quick Reference 5
The Stiletto™ I7 Pin-up Picture 6
3. Setup 7
Fuse Replacement 7
Connecting A Bunch Of Stiletto™ I7 Fixtures 7
Data/DMX Cables 7
Cable Connectors 8
3-Pin??? 5-Pin??? Huh? 8
Take It To The Next Level: Setting up DMX Control 8
Fixture Linking (Master/Slave Mode) 9
Mounting/Rigging 9
Mounting Points 10
Clamp Mounting 11
 Securingthexture     11
4. Operating Adjustments 12
The Control Panel 12
Control Panel Menu Structure 13
DMX Mode 14
Set The Starting DMX Address 14
Select the DMX Channel Mode 14
Select the DMX Run Mode 14
Auto, Sound Active, & Manual Adjustments 14
Auto Mode 14
Sound Active Mode 14
Loss of DMX Setting 14
Invert Pan/Tilt, Auto Position Correction 14
Dimming Curves 14
Reset Functions 14
DMX Values In-Depth 15
Troubleshooting 17
5. Appendix 18
A Quick Lesson On DMX 18
Keeping Your Stiletto™ I7 As Good As New 19
Returns (Gasp!) 19
Shipping Issues 19
Tech Specs 20
Dimensional Drawings 21

Page 3
Stiletto™ I7 User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x Stiletto™ I7 Moving Head
• 1 x Really Classy DMX Cable
• 1 x Sweet Safety Cable
• 1 x Set of Mounting Brackets
• An Ever-So-Handy Power Cord
• This Lovely User Manual
Getting It Out Of The Box
Congratulations on your purchase of the amazing Stiletto™ I7, your new lighting eye
of the storm! Now that you’ve got your Stiletto™ I7 (or hopefully, I7s!) , you should
carefully unpack the box and check the contents to ensure that all parts are pres-
ent and in good condition. If anything looks as if it has been damaged in transit,
notify the shipper immediately and keep the packing material for inspection. Again,
pleasesavethecartonandallpackingmaterials.Ifaxturemustbereturnedto
thefactory,itisimportantthatthexturebereturnedintheoriginalfactorybox
and packing.
Powering Up!
Allxturesmustbepowereddirectlyoaswitchedcircuitandcannot be run o
a rheostat (variable resistor) or dimmer circuit, even if the rheostat or
dimmer channel is used solely for a 0% to 100% switch.
AC Voltage Switch -Notallxtureshaveavoltageselectswitch,sopleaseverifythat
thextureyoureceiveissuitableforyourlocalpowersupply.Seethelabelonthe
xtureorrefertothexture’sspecicationschartformoreinformation.Axture’s
listed current rating is its average current draw under normal conditions. Check the
xtureordevicecarefullytomakesurethatifavoltageselectionswitchexiststhatit
is set to the correct line voltage you will use.
Warning! Verify that the voltage select switch on your unit matches the
line voltage applied. Damage to your xture may result if the line voltage
applied does not match the voltage indicated on the voltage selector switch.
All xtures must be connected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, please just visit our website at www.blizzardlighting.
com/support and open a support ticket. We’ll be happy to help, honest.
Disclaimer:Theinformationandspecicationscontainedinthisdocumentare
subject to change without notice. Blizzard Lighting™ assumes no responsibility or
liability for any errors or omissions that may appear in this user manual. Blizzard
Lighting™ reserves the right toe update the existing document or to create a new
document to correct any errors or omissions at any time. You can download the
latest version of this document from www.blizzardlighting.com.
Author: Date: Last Edited: Date:
J.Thomas 9/6/2016 J.Thomas 11/17/2016

Page 4
Stiletto™ I7 User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC
SAFETY INSTRUCTIONS
• Please keep this User Guide for future use. If you sell the unit to someone
else, be sure that they also receive this User Guide.
• ALWAYS make sure that you are connecting to the proper voltage, and that
the line voltage you are connecting to is not higher than that stated on the
decalorrearpanelofthexture.
• This product is intended for indoor use only.
•Topreventriskofreorshock,donotexposexturetorainormoisture.
•Makesuretherearenoammablematerialsclosetotheunitwhileoperating.
• The unit must be installed in a location with adequate ventilation, at least
20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are
blocked.
• ALWAYS disconnect from the power source before servicing or replacing fuse
and be sure to replace with same fuse size and type.
•ALWAYSsecurextureusingasafetychain.NEVERcarrythexturebyits
cord. Use its carrying handles.
• DO NOT operate at ambient temperatures higher than 104°F (40°C).
• In the event of a serious operating problem, stop using the unit immediately.
NEVER try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized
technical assistance center. Always use the same type spare parts.
• NEVER connect the device to a dimmer pack.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
Caution! There are no user serviceable parts inside the unit. Do not
open the housing or attempt any repairs yourself. In the unlikely event
your unit may require service, please contact Blizzard Lighting at www.
blizzardlighting.com/tickets.

Page 5
Stiletto™ I7 User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC
2. MEET THE STILETTO™ I7 MOVING HEAD
MAIN FEATURES
• 7* 15W ultra-bright OSRAM® 4-in-1 RGBW LEDs
• Pan: 540°/ Tilt: 270° (8-16 Bit Resolution)
• Variable 4-60° beam angle
• Movingbeam,wash,orkaleidoeects
• Innitebidirectionalrotatinglens
• Built-in auto and sound active programs
• Ultra-smooth 32-bit dimming
• Internal fan cooling system
• PowerCON® compatible power in/out connectors
• Compact, high quality housing
CONTROL:
• USITT DMX-512, 27/55-channel DMX modes
• Standalone, master/slave, & sound active modes
• 3-pin DMX input and output
• Easy-to-use, 5-button LCD control panel
DMX Quick Reference (27/55-Channel Modes)
27Ch 55Ch What it does 27Ch 55Ch What it does
1 1 Pan -- 29 Led 1 Green
2 2 Fine Pan -- 30 Led 1 Blue
3 3 Tilt -- 31 Led 1 White
4 4 Fine Tilt -- 32 Led 2 Red
5 5 Dimmer -- 33 Led 2 Green
6 6 Strobe -- 34 Led 2 Blue
7 7 Red -- 35 Led 2 White
8 8 Green -- 36 Led 3 Red
9 9 Blue -- 37 Led 3 Green
10 10 White -- 38 Led 3 Blue
11 11 Linear CTO -- 39 Led 3 White
12 12 Marco Color -- 40 Led 4 Red
13 13 Function -- 41 Led 4 Green
14 14 Zoom -- 42 Led 4 Blue
15 15 Lens Rotation -- 43 Led 4 White
16 16 Shape Choice -- 44 Led 5 Red
17 17 Shape Speed -- 45 Led 5 Green
18 18 Shape Delay -- 46 Led 5 Blue
19 19 Shape Red -- 47 Led 5 White
20 20 Shape Green -- 48 Led 6 Red
21 21 Shape Blue -- 49 Led 6 Green
22 22 Shape White -- 50 Led 6 Blue
23 23 Foreground Dimmer -- 51 Led 6 White
24 24 Background Dimmer -- 52 Led 7 Red
25 25 Shape Change -- 53 Led 7 Green
26 26 ShapeOset -- 54 Led 7 Blue
27 27 Reset -- 55 Led 7 White
-- 28 Led 1 Red -- -- --

Page 6
Stiletto™ I7 User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC
Head/Arm
Figure 1: The Stiletto™ I7 Pin-Up Picture
LCD Display
7* 15W OSRAM®
RGBW LEDs
Menu
Buttons
Figure 2: The Rear Connections
Fuse Cover
Power OutDMX InDMX Out Power In
Power Switch

Page 7
Stiletto™ I7 User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC
3. SETUP
Fuse Replacement
With a philips head screwdriver, unscrew the fuse holder out of its
housing. Remove the damaged fuse from its holder and replace with
exact same type of fuse. Reattach the fuse holder, and then reconnect
power.
Connecting A Bunch of Stiletto™ I7 Fixtures
You will need a serial data link to run light shows using a DMX-512
controllerortorunshowsontwoormorexturessettosyncinmas-
ter/slave operating mode. The combined number of channels required
byallthexturesonaserialdatalinkdeterminesthenumberofx-
tures the data link can support.
Fixtures on a serial data link must be daisy chained in one single line.
Also,connectingmorethan32xturesononeserialdatalinkwithout
the use of a DMX optically-isolated splitter may result in deterioration
of the digital DMX signal. The maximum recommended cable-run dis-
tance is 500 meters (1640 ft). The maximum recommended number
ofxturesonaserialdatalinkis32xtures.
Data/DMX Cabling
Tolinkxturestogetheryou’llneeddatacables.Youshouldusedata-
grade cables that can carry a high quality signal and are less prone to
electromagnetic interference.
Forinstance,Belden©9841meetsthespecicationsforEIARS-485
applications. Standard microphone cables will “probably” be OK, but
note that they cannot transmit DMX data as reliably over long distanc-
es. In any event, the cable should have the following characteristics:
2-conductor twisted pair plus a shield
Maximum capacitance between conductors – 30 pF/ft.
Maximum capacitance between conductor & shield – 55 pF/ft.
Maximum resistance of 20 ohms / 1000 ft.
Nominal impedance 100 – 140 ohms

Page 8
Stiletto™ I7 User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC
Cable Connectors
Cables must have a male XLR connector on one end and a female XLR
connector on the other end. (Duh!)
CAUTION:Donotallowcontactbetweenthecommonandthex-
ture’s chassis ground. Grounding the common can cause a ground
loop,andyourxturemayperformerratically.Testcableswithan
ohm meter to verify correct polarity and to make sure the pins are not
grounded or shorted to the shield or each other.
3-Pin??? 5-Pin??? Huh?!?
If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin adapter.
They are widely available over the internet and from specialty retailers If you’d like to build your own, the
chart below details a proper cable conversion:
Conductor 3-Pin Female
(Output)
5-Pin Male
(Input)
Ground/Shield Pin 1 Pin 1
DMX Data (-) Pin 2 Pin 2
DMX Data (+) Pin 3 Pin 3
Not Used. No Connection. No Connection.
Not Used. No Connection. No Connection.
Take It To The Next Level: Setting Up DMX Control
Step 1: Connect the male connector of the
DMX cable to the female connector (output)
on the controller.
Step 2: Connect the female connector of the
DMXcabletotherstxture’smaleconnec-
tor (input). Note: It doesn’t matter which
xtureaddressistherstoneconnected.
Werecommendconnectingthexturesin
terms of their proximity to the controller,
ratherthanconnectingthelowestxture
numberrst,andsoon.
Step 3:Connectotherxturesinthechain
from output to input as above. Place a DMX
terminatorontheoutputofthenalxture
to ensure best communication.

Page 9
Stiletto™ I7 User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC
Fixture Linking (Master/Slave Mode)
1. Connect the (male) 3 pin connector side of the
DMX cable to the output (female) 3 pin connector of
therstxture.
2. Connect the end of the cable coming from the
rstxturewhichwillhavea(female)3pinconnec-
tortotheinputconnectorofthenextxturecon-
sisting of a (male) 3 pin connector. Then, proceed
to connect from the output as stated above to the
inputofthefollowingxtureandsoon.
A quick note: Often,
the setup for Master-
Slave and Standalone
operation requires that
therstxtureinthe
chain be initialized for
this purpose via either
settings in the control
panel or DIP-switches.
Secondarily,thextures
that follow may also re-
quire a slave setting.
Check the “Operating Adjustments” section in this manual for com-
pleteinstructionsforthistypeofsetupandconguration.
Mounting & Rigging
ThisxturemaybemountedinanySAFEpositionprovidedthereis
enough room for ventilation.
It is important never to obstruct the fan or vents pathway. Mount the
xtureusingasuitable“C”or“O”typeclamp.Theclampshouldbe
ratedtoholdatleast10xthexture’sweighttoensurestructuralsta-
bility. Do not mount to surfaces with unknown strength, and ensure
properly“rated”riggingisusedwhenmountingxturesoverhead.
Adjusttheangleofthexturebylooseningbothknobsandtiltingthe
xture.Afterndingthedesiredposition,retightenbothknobs.
• When selecting installation location, take into consideration lamp
replacement access (if applicable) and routine maintenance.
• Safety cables MUST ALWAYS be used.
•Nevermountinplaceswherethexturewillbeexposedtorain,
high humidity, extreme temperature changes or restricted ventilation.

Page 10
Stiletto™ I7 User Manual - Rev. A (c) 2016 Blizzard Lighting, LLC
Mounting Points
Overhead mounting requires extensive experience, which includes
calculating working load limits, knowledge of the installation material
being used, and periodic safety inspection of all installation material
andthexture.Ifyoulackthesequalications,donotattemptthe
installation yourself. Improper installation can result in bodily injury.
Caution!
Pleasebeaware,youshouldhaveaqualiedelectricianperformingall
of your electrical connection needs. Better safe than sorry!
Be sure to complete all rigging and installation procedures before
connecting the main power cord to the appropriate wall outlet.