Blocklychain DS-104 User manual

DOOR
SENSOR
DS-104
628942042942

2
Thank you for purchasing Door Sensor. We are
excited to bring convenience, security, and
peace of mind into your home.
Control and monitor your home devices
from Internet.
HELLO
Remote Access
Door Sensor connects to the Internet via
Wi-Fi.
Using a last-longing rechargable battery,
Door Sensor works for a long time.
Using Blockly, you can automate and
expand the functionalities of your Door
Sensor.
Wi-Fi Connectivity
Rechargable Battery
Blockly Programming

3
How to Mount
Door Sensor
To mount the Door Sensor, stick the big part on
the frame of the door or window. Then, place
the small part on the surface opposite the big
part.
Maximum recommended gap between the big
and the small parts is 2cm.

4
1
2
3
4
5
6
1Click on Create Account
2Type your e-mail address
3Type your password
4Re-type your password
5Click on Create Account
6Check your e-mail to verify your account , then
click on I'm Already Veried
Create a New Account:
How to Install
App
Download Blocklychain App
Product
Installation
Guide

5
1Click on Sign In
2Type your e-mail address
3Type your password
4Click on Sign In
1
2
3
4
Sign In:

6
To install a new device in
Android, make sure the mobile
Bluetooth is turned on and
allowing the app to "access
device's location / Bluetooth"

7
How to Install
Device
Connect Thermometer Hygrometer to a USB
Type-C charger. Before continuing installation
process, let's device battery get fully charged.
* A solid green indicator light shows the battery is
fully charged.
Connect the
device to a charger
then click on the
button on your
device
1
1Click on menue icon
2Click on Devices
3Click on add icon
2
Device: CONNECTED
Door: Open
Battery: 85 %
The latest data received at:
2022-12-14 05:25:34,000
Door Sensor
New Device
3

8
4Click on Add Device
5Choose device type
6Turn on your bluetooth, then click on Next
7Find your device from the list, then click on Connect
8Click on Search Wi-Fi
9Searching for available Wi-Fi networks
8
7
6
5
9
Device: CONNECTED
Door: Open
Battery: 85 %
The latest data received at:
2022-12-14 05:25:34,000
Door Sensor
New Device
4

9
If the device installation process finishes
successfully, the message Abe displayed.
Otherwise,
the message
Bwill be
displayed. It
indicates that
something
went wrong
and you
will need
to redo the
installation
process
again.
A
B
10
Choose your Wi-Fi SSID
Type your Wi-Fi password Click on Set Device Wi-Fi
10
11
11

10
How to Monitor
Your Device
1
1Click on menue icon
2Click on Devices
3This is Device Card
2
Device: CONNECTED
Door: Open
Battery: 85 %
The latest data received at:
2022-12-14 05:25:34,000
Door Sensor
New Device
3

11
1Name of the Door Sensor
2Device modes
3Device status
4Battery indicator
5Last activity time
6Click on the device card and go to the cong
card.
Device: CONNECTED
Door: Open
Battery: 85 %
The latest data received at:
2022-12-14 05:25:34,000
Door Sensor
New Device
2
3
6
5
1
4

12
Device modes
Open
Close
The small part got far from the big part, so
door/window is opened.
The small part is close to the big part, so
door/window is closed.

13
Cong Card
In Cong tab, you can update rmware,
rename device, and remove your device from
Blocklychain App.
1Device information
2Rename your device
3Update device rmware
4Remove your device
5Device installation date
1
5
2
3
4
Door Sensor
New Device

14
Connection
Battery
Reset Factory
Status Indicator Description
2 seconds 2 seconds Ready to install
Solid Red Low battery
Solid Red Solid Orange Device is back to factory
condition
0.2 second 0.2 second Connecting to Wi-Fi
Solid Blue Charging
0.1 second 0.1 second App connected to device
Solid Green Full charge
4 seconds 4 seconds Problem connecting to server
0.2 second 0.2 second Low battery, need to be charge
Solid Orange Connecting to server
LED's Status

15
How to Reset
Your Device
Reset Factory
Reset Device
On your Door Sensor
Click and release the button, then press and
hold it for 10 seconds.
Try to connect your battery-powered devices
to a charger and then disconnect it. It might
resolve the problem. If the problem continues,
use a small jumper wire or tweezers to shorten
the metal contact on the back of your device.

16
Caution
1. Do not disassemble the product or change
the batteries.
2. Do not charge the product at high temper-
ature. Keep the device away from open re to
avoid explosion.
3. Improper use of your device’s battery may
result in re or explosion. Do not heat, open,
puncture,mutilate,ordisposeofyourdeviceorits
batteryinre.Donotleaveorchargeyourdevice
in direct sunlight for an extended period of time.
Doing so may cause damage or melt the battery.
4. This device may contain small parts that may
be a choking hazard to children. Keep the device
out of the reach of small children.
5. Radio-frequency emissions and magnetic
elds from electronic equipment can negatively
aect the operation of other electronic
equipment, causing them to malfunction. The
wireless transmitters and electrical circuits in
thedevicemaycauseunintentionalinterference
in other electronic equipment. Persons with
pacemakers should always take the following
precautions: The American Heart Association
recommends that a minimum separation of
15 cm (6inches) be maintained between a
wireless device and a pacemaker to avoid
potential interference with the pacemaker.
Do not carry your device in a chest pocket.

17
6. Parts of your device are magnetic and
may attract metallic items. Do not place
magnetically sensitive devices, credit cards,
other magnetic storage media near your
device.

18
Device
Specication
Product Name
Model
Size (big part)
Size (small part)
Weight (big part)
Weight (small part)
Material
Communication
Battery
Charging Port
Door Sensor
DS-104
7x2x2 cm
5x1x1 cm
22 g
4 g
ABS
Wi-Fi 802.11 b/g/n 2.4GHz
3.7V Lithium rechargeable
USB Type-C

19
All right reserved. Copyright © 2022 Blocklychain
Package Content
1x Door Sensor
1x Big Part
1x Small Part
For further help or inquiries:
Email [e-mail]