Blodgett MG3270 How to use

BLODGETT OVEN COMPANY
www.blodgettcorp.com
50 Lakeside Avenue, Burlington, VT 05402
Toll Free: [phone] • Phone: [phone] • Fax: [phone]
MG3270
EXTERIOR CONSTRUCTION
!Stainless steel front, top and sides
!Aluminized steel back and bottom
!Side loading glass door and handle
!2" (51mm) Vitreous fiber insulation at bottom, back and top
!Ceramic fiber insulation at blower installation
INTERIOR CONSTRUCTION
!Adjustable aluminized steel air flow plate at top and bottom
!32" (813mm) stainless steel wire mesh conveyor belt
!Three single inlet blowers for air circulation
OPERATION
!Heat transferred through forced convection (impingment)
!Open vented baking compartment
!Electronic spark ignition control system
!Gas power type burner has mixer with adjustable shutter and sight window
!Internal gas pressure regulator
!Integral microprocessor based controls with solid state 600°F (315.5°C)
maximum thermostat and belt speed control with digital display
!Three blower motors (1/4 HP minimum) with centrifugal switches
!One control area cooling fan with thermal overload switch
STANDARD FEATURES
!Front mounted solid state controls
!Belt direction: (must specify)
"left to right "right to left
!Product stops
!Oven start-up
!One year parts & labor warranty*
* For all international markets, contact your local distributor.
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
!Legs/casters:
"17-1/4" (438mm) black legs with casters
"23-1/4" (591mm) black legs with casters
"Triple stack base with casters
!Shelf extension:
"15" (381mm)
"20" (508mm)
!Flexible gas hose with quick disconnect and
restraining device:
"36" (914mm)
"48" (1219mm)
Note: Two 48" (1219mm) and one 36" (914mm)
hose on triple model
"Stacking rails
"Split belt — two 16" (406mm) wide belts
"10 foot cord set with receptacle
"One year additional extended warranty
OPTIONS AND ACCESSORIES
(AT NO ADDITIONAL CHARGE)
"Remote computerized control
MODEL MG3270
Gas Conveyor Oven
Project
Item No.
Quantity
BLODGETT conveyor oven with 32" (813mm) wide belt and 70" (1778mm)
baking zone length. Single, double or triple stack models are available.
All data is shown per oven section, unless otherwise indicated.

BLODGETT OVEN COMPANY
www.blodgettcorp.com
50 Lakeside Avenue, Burlington, VT 05402
Toll Free: [phone] • Phone: [phone] • Fax: [phone]
MODEL MG3270
SHORT FORM SPECIFICATIONS
Provide Blodgett conveyor model MG3270 conveyor oven. Unit shall be gas heated and shall cook by means of forced, heated air. Unit shall be (single/double/triple) deck supported
by (specify stand type from options list). Each deck shall be fully independent, of stainless steel construction, and fully insulated on all sides. Provide with gas heated baking compart-
ment with three blowers to evenly distribute heat across baking zone. Conveyor belt shall be 32" (815mm) wide and constructed of stainless steel wire mesh; baking zone length shall
be 70" (1778mm). Side mounted control panel shall be solid state with 600°F (315.5°C) maximum thermostat and digital display of adjustable belt speed. Provide start-up inspection
service by a factory authorized service agent. Provide options and accessories as indicated.
DIMENSIONS:
Floor space: 62" (1575mm) wide x 106" (2690mm) long
Product clearance: 3-1/2" (89mm)
Belt width: 32" (815mm) - Optional split belt 16" (405mm) each
Baking zone length: 70" (1780mm)
GAS SUPPLY (specify): Natural Propane
Single 3/4" NPT 3/4" NPT
Double stack 3/4" NPT 3/4" NPT
Triple stack 3/4" NPT 3/4" NPT
MAXIMUM INPUT
MG3270 Single: 150,000 BTU/hr
Double stack: 300,000 BTU/hr
Triple Stack: 450,000 BTU/hr
Minimum Gas Pressure: 4.5" W.C. for natural gas
11.0" W.C. for propane gas
Maximum Gas Pressure: 10.5" W.C. for natural gas
13" W.C. for propane gas
POWER SUPPLY: (with dedicated ground)
3 wire with Ground, 9 amp. 120/208-240VAC, 1 Phase, 60 Hz.
MINIMUM ENTRY CLEARANCE:
Uncrated 24.2" (615mm)
Crated 31-1/2" (800mm)
COMBUSTIBLE WALL CLEARANCE:
Gas 20" (508mm)
SHIPPING INFORMATION:
Approx. Weight: Crated
Single: 1400 lbs. (636 kg)
Double stack: 2800 lbs. (1273 kg)
Triple stack: 4200 lbs. (1909 kg)
Crate Size:
104-1/2" (2654mm) x 31-1/2" (800mm) x 66-1/2" (1689mm)
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice
2-1/2” NPT
VENT
3/4” NPT
GAS INPUT
3-1/2” (90mm)
PRODUCT CLEARANCE
END VIEW
Dimensions reflect non-enclosed hood application
18”
(455mm)
TOP VIEW
70” (1780mm)
106” (2690mm)
GAS INPUT
ELECTRICAL
INPUT
52”
(1320mm)
62”
(1575mm)
32”
(815mm)
24.2”
(615mm)
47.5”
(1205mm) 34.5”
(875mm)
SINGLE - FRONT VIEW
23.5”
(595mm)
65.8”
(1670mm)
28.5”
(725mm)
DOUBLE - FRONT VIEW
52.7”
(1340mm) 17.5”
(445mm)
APPROVAL/STAMP
P/N M9986 Rev F (6/01)