Blu Stream SW41AU User manual

SW41/21AU
User Manual
Output Select Input 1 Input 2 Input 3 Input 4 IR

SW41/21AU USER MANUAL
02
www.blustream.co.uk
Surge protection device
recommended
This product contains sensitive electri-
cal components that may be damaged
by electrical spikes, surges, electric
shock, lightning strikes, etc. Use of
surge protection systems is highly
recommended in order to protect and
extend the life of your equipment.
Introduction 03
Features 03
Panel Descriptions 03/04
Specifications 05
Package Contents 05
Maintenance 05
Contents
Thank you for purchasing
this product.
For optimum performance and safety,
please read these instructions care-
fully before connecting, operating or
adjusting this product. Please keep this
manual for future reference.

SW41/21AU USER MANUAL
03
contact [email protected]o.uk / [e-mail]
Our SW41 is a 4-Way HDMI switch with integrated audio breakout. This SW41 has an
auto-detect function which will switch the unit to the source which has most recently
been powered on. The switch supports all video resolutions up to and including 4K.
Introduction
• Supports resolutions up to 1080p@60HZ, 48-bit deep
colour, 4K@60 hz
• SW41 features 4x HDMI inputs that can be switched to single
HDMI output
• SW21 features 2x HDMI inputs that can be switched to single
HDMI output
• Dolby TrueHD and DTS-HD master audio pass through HDMI
output
• Advanced EDID management for rapid integration of
sources with display
• Digital coaxial audio (S/PDIF) and L/R analogue audio
de-embedded from PCM audio on the selected HDMI feed.
• Multiple switching modes - push-in button, IR remote
control and IR receiver 3.5mm port on rear panel (Only use
compatible Blustream 5V IR products)
• Full 3D pass-through
• HDCP compliant
FEATURES:
Output Select Input 1 Input 2 Input 3 Input 4 IR
Front Panel
1Output LED indicator – indicates if a display is connected to the
switch HDMI output
2Select button – press to toggle between HDMI inputs
3Input LED indicator – Displays the HDMI input currently
active
4IR receiver window
1 2 43

SW41/21AU USER MANUAL
04
www.blustream.co.uk
EDID
IR Rx
Input 1 Input 2 Input 3 Input 4 Output SP
Audio Out
L/R DC 5V
Rear Panel
SW41AU – Remote Control
1HDMI inputs (SW41 x4, SW21 x2) - Connect to HDMI source device
2HDMI output – Connect to HDMI display device
3Coaxial digital output – De-embedded from selected HDMI input)
4Analogue audio Le/Right output (3.5mm stereo jack) –
De-embedded from selected HDMI input. Only supports stereo
PCM audio feeds
5External IR input – Connect Blustream IR sensor or control
processor to control switcher
6EDID DIP switches – See below settings
7Power port – Use supplied 5V/2A DC adaptor to power
switcher
1Direct HDMI input selection buttons
2Scroll through HDMI inputs 1-2-3-4
2 3 4 5 6 71
Input
1 2 3 4
1
2

SW41/21AU USER MANUAL
05
contact [email protected]o.uk / [e-mail]
EDID (Extended Display Identification Data) is a data structure
that is used between a display and a scource. This data is
used by that is used by the source to find out what audio and
video resolutions are supported by the display then from this
information the scource will determine what the best audio
and video resoloutions are to be outputted.
While the objective of EDID is to make connecting a digital
display to a scource a simple plug and play procedureissues
do arise when multiple displays or video matrix switching is
introduced because of the increased number of variables.
By pre-determining the video resolution and audio format of
the scource and display device we can remove some of the
EDID hand shaking process thus making switching quicker and
more reliable. instructions on these settings can be found on
the right.
EDID Control [DIP]=0000: HDMI 1080p@60Hz, Audio 2CH PCM
[DIP]=0001: HDMI 1080p@60Hz, Audio 5.1CH PCM/DTS/DOLBY
[DIP]=0010: HDMI 1080p@60Hz, Audio 7.1CH PCM/DTS/DOLBY/HD
[DIP]=0011: HDMI 1080i@60Hz, Audio 2CH PCM
[DIP]=0100: HDMI 1080i@60Hz, Audio 5.1CH PCM/DTS/DOLBY
[DIP]=0101: HDMI 1080i@60Hz, Audio 7.1CH PCM/DTS/DOLBY/HD
[DIP]=0110: HDMI 1080p@60Hz, 3D Audio 2CH PCM
[DIP]=0111: HDMI 1080p@60Hz, 3D Audio 5.1CH PCM/DTS/DOLBY
[DIP]=1000: HDMI 1080p@60Hz, 3D Audio 7.1CH PCM/DTS/DOLBY/HD
[DIP]=1001: HDMI 4K2K@60Hz, Audio 2CH PCM
[DIP]=1010: HDMI 4K2K@60Hz, Audio 5.1CH PCM/DTS/DOLBY
[DIP]=1011: HDMI 4K2K@60Hz, Audio 7.1CH PCM/DTS/DOLBY/HD
[DIP]=1100: DVI 1280x1024@60HZ, Audio None
[DIP]=1101: DVI 1920x1080@60HZ, Audio None
[DIP]=1110: DVI 1920x1200@60HZ, Audio None
Specifications
SW41AU
Video Input Connectors: 4x HDMI Type A
SW21AU
Video Input Connectors: 2x HDMI Type A
Video Output Connectors: 1x HDMI Type A
Audio Output Connectors:1x Coaxial digital & 1x Analogue audio L/R (3.5mm stereo Jack)
IR Input Ports: 1x 3.5mm stereo Jack
Casing Dimensions (W x H x D): 196mm x 23mm x 94mm
Dimensions including connections (W x H x D): 196mm x 32mm x 104mm
Shipping Weight: 0.8kg
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature : -4°F to 140°F (-20°C to 60°C)
Power Supply: 5V/2A DC

SW41/21AU USER MANUAL
06
www.blustream.co.uk
Example Schematic SW41/SW21
1234
MAXIMUM OF 4 SOURCES
EDID
IR Rx
Input 1 Input 2 Input 3 Input 4 Output SP
Audio Out
L/R DC 5V
DISPLAY
HDMI Stereo Audio IR Cable
Speaker Cable

SW41/21AU USER MANUAL
07
contact [email protected]o.uk / [e-mail]
Package Contents:
• 1 x SW41AU / SW21AU
• 1x SW41-REMOTE
• 1 x 5V/2A DC power supply
• 1 x DC/USB cable
Maintenance:
Clean this unit with a so, dry cloth. Never use alcohol,
paint thinner or benzene to clean this unit.

www.blustream.co.uk
www.blustream.com.au