BluDento BLT-2 User manual
BLT-2
WIRELESS MUSIC RECEIVER
USER MANUAL
WELCOME
Congratulations on your purchase of the BluDento BLT-2 True Hi-Fi BT Music
Receiver. The following pages explain the features and operation of
the BLT-2. Please take a few moments to read this user guide.
Also read all safety instructions before proceeding. The answers to most set
up and performance questions can be found in this guide. If you have any
further questions about the operation or use of this product, please contact our
customer care team for assistance on eshop@bludento.com
OVERVIEW
Enjoy a limitless universe of high definition digital music through your existing
Hi-Fi audio system. BLT-2 streams the highest quality audio wirelessly from
your BT enabled device to any music system or powered speakers. BLT-2 is a
true high fidelity component that uses high-end Qualcomm®aptX™low latency /
AAC / SBC audio streaming codecs and audiophile grade DAC to unleash all the
clarity, crispness and full emotional impact your Hi-Fi stereo system can deliver.
Unlike standard BT receivers, BLT-2 provides ultimate wireless freedom with the
longest wireless range.
IN THE BOX
Power plug
USB 5V DC
(0.2A - 3.0A)
Stereo
Analog
Output
Antenna
Rotates left,
right and up,
DO NOT
rotate down
Pairing LED
Toslink
Optical
Output
Coax
Audio
Output
Understanding
the LED alerts:
Blue blinking: powered
and in pairing mode,
waiting to be paired
Solid blue light:
In connection
• BluDento BLT-2
• 2RCA to 2RCA Stereo Audio Cable
• 3.5mm to 2RCA Stereo Audio adapter
• USB to micro USB Cable
• TOSLINK optical audio cable
• User Guide
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC
(0.2A - 3.0A )
TROUBLESHOOTING TIPS
My device does not pair with BLT-2.
• Ensure that BT is turned ON on your device.
• Make sure that the LED indicator is blinking and your device is as close to
BLT-2 as possible.
• Restart the BLT-2 and cycle BT on your device in order to
re-establish the connection.
The LED Indicator is solid, but I cannot connect my device.
• Check whether no other devices are connected. If so, either disconnect or
turn off BT on the other devices till it flashes, then try connecting.
• Close the BT function of all your BT devices and open
them again.
The sound quality is poor and / or the audio is cutting out.
• Move your device or BLT-2 away from cordless phones, routers,
microwave ovens or other BT devices.
• Try moving your device closer to BLT-2.
• Turn off your device’s Wi-Fi.
• Try unpairing and repairing your device to BLT-2.
• Check that your device’s OS is updated to the latest version.
Only one channel plays music.
• Check the cables between BLT-2 and your stereo system.
• Check your BT device, music player APP and home theater to ensure
that the audio balance is centered.If you have any further queries please
contact us on eshop@bludento.com
The LED indicator is solid and my device is connected but there
is no audio output.
• Ensure that the BLT-2 output is correctly connected to your audio system.
• Check whether the audio source is correctly selected on your music system
(Analog audio or digital optical/coaxial input).
• Verify the volume levels on your BT device, player APP and home theater.
Please confirm all are not mute
• Try unpairing and repairing your device to BLT-2.
The volume output level from BLT-2 is Low.
• Verify the volume levels on your BT device, player APP.
• Also check the volume levels on your powered speakers or stereo system.
Please confirm all are not on mute.
QUICK SETUP
Setup and pairing is really easy. The following instructions will help you connect
BLT-2 to your music system and pair with your tablet, computer or smartphone.
STEP 1: Connect audio cables from BLT-2 rear panel to your music system
audio input.
STEP 2: Connect a power adapter (excluded) to BLT-2 with the included power
supply cable and plug the power adapter (excluded) into an AC outlet.
BLT-2 will automatically go into pairing mode. The LED light will start
flashing to indicate the unit is now ready to be paired.
STEP 3: Turn ON BT on your device and go to BT preferences.
STEP 4: Scan listed BT devices and select “BLT-2” to pair and connect. The LED
indicator should turn solid.
STEP 5: Make sure your Hi-Fi audio system is turned on and the proper input
source is selected.
STEP 6: The music on your smart device will now play through your Hi-Fi
audio system.
Disconnect BLT-2 from a paired device and put it back into pairing mode.
Repeat Steps 3 to 6 to add additional devices. BLT-2 can connect to one smart
device at a time, but is capable of remembering up to 8 devices.
BLT-2
WIRELESS MUSIC RECEIVER
USER MANUAL
WELCOME
Congratulations on your purchase of the BluDento BLT-2 True Hi-Fi BT Music
Receiver. The following pages explain the features and operation of
the BLT-2. Please take a few moments to read this user guide.
Also read all safety instructions before proceeding. The answers to most set
up and performance questions can be found in this guide. If you have any
further questions about the operation or use of this product, please contact our
OVERVIEW
Enjoy a limitless universe of high definition digital music through your existing
Hi-Fi audio system. BLT-2 streams the highest quality audio wirelessly from
your BT enabled device to any music system or powered speakers. BLT-2 is a
true high fidelity component that uses high-end Qualcomm®aptX™low latency /
AAC / SBC audio streaming codecs and audiophile grade DAC to unleash all the
clarity, crispness and full emotional impact your Hi-Fi stereo system can deliver.
Unlike standard BT receivers, BLT-2 provides ultimate wireless freedom with the
longest wireless range.
IN THE BOX
Power plug
USB 5V DC
(0.2A - 3.0A)
Stereo
Analog
Output
Antenna
Rotates left,
right and up,
DO NOT
rotate down
Pairing LED
Toslink
Optical
Output
Coax
Audio
Output
Understanding
the LED alerts:
Blue blinking: powered
and in pairing mode,
waiting to be paired
Solid blue light:
In connection
• BluDento BLT-2
• 2RCA to 2RCA Stereo Audio Cable
• 3.5mm to 2RCA Stereo Audio adapter
• USB to micro USB Cable
• TOSLINK optical audio cable
• User Guide
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC
(0.2A - 3.0A )
TROUBLESHOOTING TIPS
My device does not pair with BLT-2.
• Ensure that BT is turned ON on your device.
• Make sure that the LED indicator is blinking and your device is as close to
BLT-2 as possible.
• Restart the BLT-2 and cycle BT on your device in order to
re-establish the connection.
The LED Indicator is solid, but I cannot connect my device.
• Check whether no other devices are connected. If so, either disconnect or
turn off BT on the other devices till it flashes, then try connecting.
• Close the BT function of all your BT devices and open
them again.
The sound quality is poor and / or the audio is cutting out.
• Move your device or BLT-2 away from cordless phones, routers,
microwave ovens or other BT devices.
• Try moving your device closer to BLT-2.
• Turn off your device’s Wi-Fi.
• Try unpairing and repairing your device to BLT-2.
• Check that your device’s OS is updated to the latest version.
Only one channel plays music.
• Check the cables between BLT-2 and your stereo system.
• Check your BT device, music player APP and home theater to ensure
that the audio balance is centered.If you have any further queries please
contact us on eshop@bludento.com
The LED indicator is solid and my device is connected but there
is no audio output.
• Ensure that the BLT-2 output is correctly connected to your audio system.
• Check whether the audio source is correctly selected on your music system
(Analog audio or digital optical/coaxial input).
• Verify the volume levels on your BT device, player APP and home theater.
Please confirm all are not mute
• Try unpairing and repairing your device to BLT-2.
The volume output level from BLT-2 is Low.
• Verify the volume levels on your BT device, player APP.
• Also check the volume levels on your powered speakers or stereo system.
Please confirm all are not on mute.
QUICK SETUP
Setup and pairing is really easy. The following instructions will help you connect
BLT-2 to your music system and pair with your tablet, computer or smartphone.
STEP 1: Connect audio cables from BLT-2 rear panel to your music system
audio input.
STEP 2: Connect a power adapter (excluded) to BLT-2 with the included power
supply cable and plug the power adapter (excluded) into an AC outlet.
BLT-2 will automatically go into pairing mode. The LED light will start
flashing to indicate the unit is now ready to be paired.
STEP 3: Turn ON BT on your device and go to BT preferences.
STEP 4: Scan listed BT devices and select “BLT-2” to pair and connect. The LED
indicator should turn solid.
STEP 5: Make sure your Hi-Fi audio system is turned on and the proper input
source is selected.
STEP 6: The music on your smart device will now play through your Hi-Fi
audio system.
Disconnect BLT-2 from a paired device and put it back into pairing mode.
Repeat Steps 3 to 6 to add additional devices. BLT-2 can connect to one smart
device at a time, but is capable of remembering up to 8 devices.
BLT-2
WIRELESS MUSIC RECEIVER
USER MANUAL
WELCOME
Congratulations on your purchase of the BluDento BLT-2 True Hi-Fi BT Music
Receiver. The following pages explain the features and operation of
the BLT-2. Please take a few moments to read this user guide.
Also read all safety instructions before proceeding. The answers to most set
up and performance questions can be found in this guide. If you have any
further questions about the operation or use of this product, please contact our
OVERVIEW
Enjoy a limitless universe of high definition digital music through your existing
Hi-Fi audio system. BLT-2 streams the highest quality audio wirelessly from
your BT enabled device to any music system or powered speakers. BLT-2 is a
true high fidelity component that uses high-end Qualcomm®aptX™low latency /
AAC / SBC audio streaming codecs and audiophile grade DAC to unleash all the
clarity, crispness and full emotional impact your Hi-Fi stereo system can deliver.
Unlike standard BT receivers, BLT-2 provides ultimate wireless freedom with the
longest wireless range.
IN THE BOX
Power plug
USB 5V DC
(0.2A - 3.0A)
Stereo
Analog
Output
Antenna
Rotates left,
right and up,
DO NOT
rotate down
Pairing LED
Toslink
Optical
Output
Coax
Audio
Output
Understanding
the LED alerts:
Blue blinking: powered
and in pairing mode,
waiting to be paired
Solid blue light:
In connection
• BluDento BLT-2
• 2RCA to 2RCA Stereo Audio Cable
• 3.5mm to 2RCA Stereo Audio adapter
• USB to micro USB Cable
• TOSLINK optical audio cable
• User Guide
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC
(0.2A - 3.0A )
TROUBLESHOOTING TIPS
My device does not pair with BLT-2.
• Ensure that BT is turned ON on your device.
• Make sure that the LED indicator is blinking and your device is as close to
BLT-2 as possible.
• Restart the BLT-2 and cycle BT on your device in order to
re-establish the connection.
The LED Indicator is solid, but I cannot connect my device.
• Check whether no other devices are connected. If so, either disconnect or
turn off BT on the other devices till it flashes, then try connecting.
• Close the BT function of all your BT devices and open
them again.
The sound quality is poor and / or the audio is cutting out.
• Move your device or BLT-2 away from cordless phones, routers,
microwave ovens or other BT devices.
• Try moving your device closer to BLT-2.
• Turn off your device’s Wi-Fi.
• Try unpairing and repairing your device to BLT-2.
• Check that your device’s OS is updated to the latest version.
Only one channel plays music.
• Check the cables between BLT-2 and your stereo system.
• Check your BT device, music player APP and home theater to ensure
that the audio balance is centered.If you have any further queries please
contact us on eshop@bludento.com
The LED indicator is solid and my device is connected but there
is no audio output.
• Ensure that the BLT-2 output is correctly connected to your audio system.
• Check whether the audio source is correctly selected on your music system
(Analog audio or digital optical/coaxial input).
• Verify the volume levels on your BT device, player APP and home theater.
Please confirm all are not mute
• Try unpairing and repairing your device to BLT-2.
The volume output level from BLT-2 is Low.
• Verify the volume levels on your BT device, player APP.
• Also check the volume levels on your powered speakers or stereo system.
Please confirm all are not on mute.
QUICK SETUP
Setup and pairing is really easy. The following instructions will help you connect
BLT-2 to your music system and pair with your tablet, computer or smartphone.
STEP 1: Connect audio cables from BLT-2 rear panel to your music system
audio input.
STEP 2: Connect a power adapter (excluded) to BLT-2 with the included power
supply cable and plug the power adapter (excluded) into an AC outlet.
BLT-2 will automatically go into pairing mode. The LED light will start
flashing to indicate the unit is now ready to be paired.
STEP 3: Turn ON BT on your device and go to BT preferences.
STEP 4: Scan listed BT devices and select “BLT-2” to pair and connect. The LED
indicator should turn solid.
STEP 5: Make sure your Hi-Fi audio system is turned on and the proper input
source is selected.
STEP 6: The music on your smart device will now play through your Hi-Fi
audio system.
Disconnect BLT-2 from a paired device and put it back into pairing mode.
Repeat Steps 3 to 6 to add additional devices. BLT-2 can connect to one smart
device at a time, but is capable of remembering up to 8 devices.
BLT-2
WIRELESS MUSIC RECEIVER
USER MANUAL
WELCOME
Congratulations on your purchase of the BluDento BLT-2 True Hi-Fi BT Music
Receiver. The following pages explain the features and operation of
the BLT-2. Please take a few moments to read this user guide.
Also read all safety instructions before proceeding. The answers to most set
up and performance questions can be found in this guide. If you have any
further questions about the operation or use of this product, please contact our
OVERVIEW
Enjoy a limitless universe of high definition digital music through your existing
Hi-Fi audio system. BLT-2 streams the highest quality audio wirelessly from
your BT enabled device to any music system or powered speakers. BLT-2 is a
true high fidelity component that uses high-end Qualcomm®aptX™low latency /
AAC / SBC audio streaming codecs and audiophile grade DAC to unleash all the
clarity, crispness and full emotional impact your Hi-Fi stereo system can deliver.
Unlike standard BT receivers, BLT-2 provides ultimate wireless freedom with the
longest wireless range.
IN THE BOX
Power plug
USB 5V DC
(0.2A - 3.0A)
Stereo
Analog
Output
Antenna
Rotates left,
right and up,
DO NOT
rotate down
Pairing LED
Toslink
Optical
Output
Coax
Audio
Output
Understanding
the LED alerts:
Blue blinking: powered
and in pairing mode,
waiting to be paired
Solid blue light:
In connection
• BluDento BLT-2
• 2RCA to 2RCA Stereo Audio Cable
• 3.5mm to 2RCA Stereo Audio adapter
• USB to micro USB Cable
• TOSLINK optical audio cable
• User Guide
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC
(0.2A - 3.0A )
TROUBLESHOOTING TIPS
My device does not pair with BLT-2.
• Ensure that BT is turned ON on your device.
• Make sure that the LED indicator is blinking and your device is as close to
BLT-2 as possible.
• Restart the BLT-2 and cycle BT on your device in order to
re-establish the connection.
The LED Indicator is solid, but I cannot connect my device.
• Check whether no other devices are connected. If so, either disconnect or
turn off BT on the other devices till it flashes, then try connecting.
• Close the BT function of all your BT devices and open
them again.
The sound quality is poor and / or the audio is cutting out.
• Move your device or BLT-2 away from cordless phones, routers,
microwave ovens or other BT devices.
• Try moving your device closer to BLT-2.
• Turn off your device’s Wi-Fi.
• Try unpairing and repairing your device to BLT-2.
• Check that your device’s OS is updated to the latest version.
Only one channel plays music.
• Check the cables between BLT-2 and your stereo system.
• Check your BT device, music player APP and home theater to ensure
that the audio balance is centered.If you have any further queries please
contact us on eshop@bludento.com
The LED indicator is solid and my device is connected but there
is no audio output.
• Ensure that the BLT-2 output is correctly connected to your audio system.
• Check whether the audio source is correctly selected on your music system
(Analog audio or digital optical/coaxial input).
• Verify the volume levels on your BT device, player APP and home theater.
Please confirm all are not mute
• Try unpairing and repairing your device to BLT-2.
The volume output level from BLT-2 is Low.
• Verify the volume levels on your BT device, player APP.
• Also check the volume levels on your powered speakers or stereo system.
Please confirm all are not on mute.
QUICK SETUP
Setup and pairing is really easy. The following instructions will help you connect
BLT-2 to your music system and pair with your tablet, computer or smartphone.
STEP 1: Connect audio cables from BLT-2 rear panel to your music system
audio input.
STEP 2: Connect a power adapter (excluded) to BLT-2 with the included power
supply cable and plug the power adapter (excluded) into an AC outlet.
BLT-2 will automatically go into pairing mode. The LED light will start
flashing to indicate the unit is now ready to be paired.
STEP 3: Turn ON BT on your device and go to BT preferences.
STEP 4: Scan listed BT devices and select “BLT-2” to pair and connect. The LED
indicator should turn solid.
STEP 5: Make sure your Hi-Fi audio system is turned on and the proper input
source is selected.
STEP 6: The music on your smart device will now play through your Hi-Fi
audio system.
Disconnect BLT-2 from a paired device and put it back into pairing mode.
Repeat Steps 3 to 6 to add additional devices. BLT-2 can connect to one smart
device at a time, but is capable of remembering up to 8 devices.
BLT-2
WIRELESS MUSIC RECEIVER
USER MANUAL
WELCOME
Congratulations on your purchase of the BluDento BLT-2 True Hi-Fi BT Music
Receiver. The following pages explain the features and operation of
the BLT-2. Please take a few moments to read this user guide.
Also read all safety instructions before proceeding. The answers to most set
up and performance questions can be found in this guide. If you have any
further questions about the operation or use of this product, please contact our
OVERVIEW
Enjoy a limitless universe of high definition digital music through your existing
Hi-Fi audio system. BLT-2 streams the highest quality audio wirelessly from
your BT enabled device to any music system or powered speakers. BLT-2 is a
true high fidelity component that uses high-end Qualcomm®aptX™low latency /
AAC / SBC audio streaming codecs and audiophile grade DAC to unleash all the
clarity, crispness and full emotional impact your Hi-Fi stereo system can deliver.
Unlike standard BT receivers, BLT-2 provides ultimate wireless freedom with the
longest wireless range.
IN THE BOX
Power plug
USB 5V DC
(0.2A - 3.0A)
Stereo
Analog
Output
Antenna
Rotates left,
right and up,
DO NOT
rotate down
Pairing LED
Toslink
Optical
Output
Coax
Audio
Output
Understanding
the LED alerts:
Blue blinking: powered
and in pairing mode,
waiting to be paired
Solid blue light:
In connection
• BluDento BLT-2
• 2RCA to 2RCA Stereo Audio Cable
• 3.5mm to 2RCA Stereo Audio adapter
• USB to micro USB Cable
• TOSLINK optical audio cable
• User Guide
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC
(0.2A - 3.0A )
TROUBLESHOOTING TIPS
My device does not pair with BLT-2.
• Ensure that BT is turned ON on your device.
• Make sure that the LED indicator is blinking and your device is as close to
BLT-2 as possible.
• Restart the BLT-2 and cycle BT on your device in order to
re-establish the connection.
The LED Indicator is solid, but I cannot connect my device.
• Check whether no other devices are connected. If so, either disconnect or
turn off BT on the other devices till it flashes, then try connecting.
• Close the BT function of all your BT devices and open
them again.
The sound quality is poor and / or the audio is cutting out.
• Move your device or BLT-2 away from cordless phones, routers,
microwave ovens or other BT devices.
• Try moving your device closer to BLT-2.
• Turn off your device’s Wi-Fi.
• Try unpairing and repairing your device to BLT-2.
• Check that your device’s OS is updated to the latest version.
Only one channel plays music.
• Check the cables between BLT-2 and your stereo system.
• Check your BT device, music player APP and home theater to ensure
that the audio balance is centered.If you have any further queries please
contact us on eshop@bludento.com
The LED indicator is solid and my device is connected but there
is no audio output.
• Ensure that the BLT-2 output is correctly connected to your audio system.
• Check whether the audio source is correctly selected on your music system
(Analog audio or digital optical/coaxial input).
• Verify the volume levels on your BT device, player APP and home theater.
Please confirm all are not mute
• Try unpairing and repairing your device to BLT-2.
The volume output level from BLT-2 is Low.
• Verify the volume levels on your BT device, player APP.
• Also check the volume levels on your powered speakers or stereo system.
Please confirm all are not on mute.
QUICK SETUP
Setup and pairing is really easy. The following instructions will help you connect
BLT-2 to your music system and pair with your tablet, computer or smartphone.
STEP 1: Connect audio cables from BLT-2 rear panel to your music system
audio input.
STEP 2: Connect a power adapter (excluded) to BLT-2 with the included power
supply cable and plug the power adapter (excluded) into an AC outlet.
BLT-2 will automatically go into pairing mode. The LED light will start
flashing to indicate the unit is now ready to be paired.
STEP 3: Turn ON BT on your device and go to BT preferences.
STEP 4: Scan listed BT devices and select “BLT-2” to pair and connect. The LED
indicator should turn solid.
STEP 5: Make sure your Hi-Fi audio system is turned on and the proper input
source is selected.
STEP 6: The music on your smart device will now play through your Hi-Fi
audio system.
Disconnect BLT-2 from a paired device and put it back into pairing mode.
Repeat Steps 3 to 6 to add additional devices. BLT-2 can connect to one smart
device at a time, but is capable of remembering up to 8 devices.
BLT-2
WIRELESS MUSIC RECEIVER
USER MANUAL
WELCOME
Congratulations on your purchase of the BluDento BLT-2 True Hi-Fi BT Music
Receiver. The following pages explain the features and operation of
the BLT-2. Please take a few moments to read this user guide.
Also read all safety instructions before proceeding. The answers to most set
up and performance questions can be found in this guide. If you have any
further questions about the operation or use of this product, please contact our
OVERVIEW
Enjoy a limitless universe of high definition digital music through your existing
Hi-Fi audio system. BLT-2 streams the highest quality audio wirelessly from
your BT enabled device to any music system or powered speakers. BLT-2 is a
true high fidelity component that uses high-end Qualcomm®aptX™low latency /
AAC / SBC audio streaming codecs and audiophile grade DAC to unleash all the
clarity, crispness and full emotional impact your Hi-Fi stereo system can deliver.
Unlike standard BT receivers, BLT-2 provides ultimate wireless freedom with the
longest wireless range.
IN THE BOX
Power plug
USB 5V DC
(0.2A - 3.0A)
Stereo
Analog
Output
Antenna
Rotates left,
right and up,
DO NOT
rotate down
Pairing LED
Toslink
Optical
Output
Coax
Audio
Output
Understanding
the LED alerts:
Blue blinking: powered
and in pairing mode,
waiting to be paired
Solid blue light:
In connection
• BluDento BLT-2
• 2RCA to 2RCA Stereo Audio Cable
• 3.5mm to 2RCA Stereo Audio adapter
• USB to micro USB Cable
• TOSLINK optical audio cable
• User Guide
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC
(0.2A - 3.0A )
TROUBLESHOOTING TIPS
My device does not pair with BLT-2.
• Ensure that BT is turned ON on your device.
• Make sure that the LED indicator is blinking and your device is as close to
BLT-2 as possible.
• Restart the BLT-2 and cycle BT on your device in order to
re-establish the connection.
The LED Indicator is solid, but I cannot connect my device.
• Check whether no other devices are connected. If so, either disconnect or
turn off BT on the other devices till it flashes, then try connecting.
• Close the BT function of all your BT devices and open
them again.
The sound quality is poor and / or the audio is cutting out.
• Move your device or BLT-2 away from cordless phones, routers,
microwave ovens or other BT devices.
• Try moving your device closer to BLT-2.
• Turn off your device’s Wi-Fi.
• Try unpairing and repairing your device to BLT-2.
• Check that your device’s OS is updated to the latest version.
Only one channel plays music.
• Check the cables between BLT-2 and your stereo system.
• Check your BT device, music player APP and home theater to ensure
that the audio balance is centered.If you have any further queries please
The LED indicator is solid and my device is connected but there
is no audio output.
• Ensure that the BLT-2 output is correctly connected to your audio system.
• Check whether the audio source is correctly selected on your music system
(Analog audio or digital optical/coaxial input).
• Verify the volume levels on your BT device, player APP and home theater.
Please confirm all are not mute
• Try unpairing and repairing your device to BLT-2.
The volume output level from BLT-2 is Low.
• Verify the volume levels on your BT device, player APP.
• Also check the volume levels on your powered speakers or stereo system.
Please confirm all are not on mute.
QUICK SETUP
Setup and pairing is really easy. The following instructions will help you connect
BLT-2 to your music system and pair with your tablet, computer or smartphone.
STEP 1: Connect audio cables from BLT-2 rear panel to your music system
audio input.
STEP 2: Connect a power adapter (excluded) to BLT-2 with the included power
supply cable and plug the power adapter (excluded) into an AC outlet.
BLT-2 will automatically go into pairing mode. The LED light will start
flashing to indicate the unit is now ready to be paired.
STEP 3: Turn ON BT on your device and go to BT preferences.
STEP 4: Scan listed BT devices and select “BLT-2” to pair and connect. The LED
indicator should turn solid.
STEP 5: Make sure your Hi-Fi audio system is turned on and the proper input
source is selected.
STEP 6: The music on your smart device will now play through your Hi-Fi
audio system.
Disconnect BLT-2 from a paired device and put it back into pairing mode.
Repeat Steps 3 to 6 to add additional devices. BLT-2 can connect to one smart
device at a time, but is capable of remembering up to 8 devices.
WARRANTY
Don’t worry. Your BluDento BLT-2 is covered under our warranty. For warranty
information please visit:http://bludento.com/contact-bludento/
www.bludento.com
eshop@bludento.com
PRODUCT SAFETY
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. Improper use of this product
can result in potential electrical shock or fire hazards. Please read all safety
and operating instructions carefully before installation and use. Keep these
instructions handy for future reference.
Users of this product are cautioned not to make modifications or changes
that are not approved by BluDento, Inc. Doing so may void the compliance of
this product and may result in the loss of the user’s authority to operate the
equipment.
SAFETY INSTRUCTIONS
Keep product dry to avoid affecting the interior circuitry of the product.
High temperature will shorten the life of electronic device.
Don’t expose to extreme temperatures, it may damage the internal
circuit board.
Don’t drop the product.
Don’t put the product in direct sunlight or place in hot areas.
Don’t use chemical or detergent to clean the product.
Don’t take the product apart or the warranty will be voided.
Using the product at excessive volumes may cause permanent hearing
damage. You can get the most out of your equipment and enjoy great
audio performance even at safe levels.
Due to isolating characteristic of the product, do not use the product at
excessive volume while driving or in any other activity where failure to hear
surrounding sounds could be dangerous.
9.9cm
2.5cm
7.5cm
DESIGNED IN AUSTRALIA – MADE IN CHINA BLUDENTO INC.
©2019 BluDento, Inc. All Rights Reserved.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or
its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated,
registered in the United States and other countries. aptX is a trademark of
Qualcomm Technologies International, Ltd., registered in the United States
and other countries.
Included Accessories:
• RCA - RCA Audio Cable
• RCA - 3.5mm Audio adapter
• USB - micro USB Cable
• TOSLINK optical audio cable
• User Guide
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC(0.2A - 3.0A)
To reduce the risk of electric shock
Do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
TECHNICAL SPECIFICATIONS
BT Version: 4.2 with aptX Low Latency
Supported Codecs: aptX, aptX Low Latency, SBC, AAC, MP3, FLAC, TFF
BT Range: 30 meters, 100 feet
Input: BT
Outputs: Stereo Analog RCA; Digital Optical & Coaxial (SPDIF)
Input Power: Power Requirement: DC 5V (USB), 200mA (Min), 3A (Max)
Output Voltage: 2.1 Volts RMS
Output Impedance: 57 Ohms
D/A Converter: TI PCM5102A
Frequency Response: 10Hz - 20kHz (+/- 0.5dB)
Signal to Noise Ratio: 112dB
Total Harmonic Distortion: + Noise < 0.02%
Latency: ~30 milliseconds (MS)
Enclosure: Aluminum + ABS
WARRANTY
Don’t worry. Your BluDento BLT-2 is covered under our warranty. For warranty
information please visit:http://bludento.com/contact-bludento/
www.bludento.com
eshop@bludento.com
PRODUCT SAFETY
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. Improper use of this product
can result in potential electrical shock or fire hazards. Please read all safety
and operating instructions carefully before installation and use. Keep these
instructions handy for future reference.
Users of this product are cautioned not to make modifications or changes
that are not approved by BluDento, Inc. Doing so may void the compliance of
this product and may result in the loss of the user’s authority to operate the
equipment.
SAFETY INSTRUCTIONS
Keep product dry to avoid affecting the interior circuitry of the product.
High temperature will shorten the life of electronic device.
Don’t expose to extreme temperatures, it may damage the internal
circuit board.
Don’t drop the product.
Don’t put the product in direct sunlight or place in hot areas.
Don’t use chemical or detergent to clean the product.
Don’t take the product apart or the warranty will be voided.
Using the product at excessive volumes may cause permanent hearing
damage. You can get the most out of your equipment and enjoy great
audio performance even at safe levels.
Due to isolating characteristic of the product, do not use the product at
excessive volume while driving or in any other activity where failure to hear
surrounding sounds could be dangerous.
9.9cm
2.5cm
7.5cm
DESIGNED IN AUSTRALIA – MADE IN CHINA BLUDENTO INC.
©2019 BluDento, Inc. All Rights Reserved.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or
its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated,
registered in the United States and other countries. aptX is a trademark of
Qualcomm Technologies International, Ltd., registered in the United States
and other countries.
Included Accessories:
• RCA - RCA Audio Cable
• RCA - 3.5mm Audio adapter
• USB - micro USB Cable
• TOSLINK optical audio cable
• User Guide
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC(0.2A - 3.0A)
To reduce the risk of electric shock
Do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
TECHNICAL SPECIFICATIONS
BT Version: 4.2 with aptX Low Latency
Supported Codecs: aptX, aptX Low Latency, SBC, AAC, MP3, FLAC, TFF
BT Range: 30 meters, 100 feet
Input: BT
Outputs: Stereo Analog RCA; Digital Optical & Coaxial (SPDIF)
Input Power: Power Requirement: DC 5V (USB), 200mA (Min), 3A (Max)
Output Voltage: 2.1 Volts RMS
Output Impedance: 57 Ohms
D/A Converter: TI PCM5102A
Frequency Response: 10Hz - 20kHz (+/- 0.5dB)
Signal to Noise Ratio: 112dB
Total Harmonic Distortion: + Noise < 0.02%
Latency: ~30 milliseconds (MS)
Enclosure: Aluminum + ABS
WARRANTY
Don’t worry. Your BluDento BLT-2 is covered under our warranty. For warranty
information please visit:http://bludento.com/contact-bludento/
www.bludento.com
eshop@bludento.com
PRODUCT SAFETY
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. Improper use of this product
can result in potential electrical shock or fire hazards. Please read all safety
and operating instructions carefully before installation and use. Keep these
instructions handy for future reference.
Users of this product are cautioned not to make modifications or changes
that are not approved by BluDento, Inc. Doing so may void the compliance of
this product and may result in the loss of the user’s authority to operate the
equipment.
SAFETY INSTRUCTIONS
Keep product dry to avoid affecting the interior circuitry of the product.
High temperature will shorten the life of electronic device.
Don’t expose to extreme temperatures, it may damage the internal
circuit board.
Don’t drop the product.
Don’t put the product in direct sunlight or place in hot areas.
Don’t use chemical or detergent to clean the product.
Don’t take the product apart or the warranty will be voided.
Using the product at excessive volumes may cause permanent hearing
damage. You can get the most out of your equipment and enjoy great
audio performance even at safe levels.
Due to isolating characteristic of the product, do not use the product at
excessive volume while driving or in any other activity where failure to hear
surrounding sounds could be dangerous.
9.9cm
2.5cm
7.5cm
DESIGNED IN AUSTRALIA – MADE IN CHINA BLUDENTO INC.
©2019 BluDento, Inc. All Rights Reserved.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or
its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated,
registered in the United States and other countries. aptX is a trademark of
Qualcomm Technologies International, Ltd., registered in the United States
and other countries.
Included Accessories:
• RCA - RCA Audio Cable
• RCA - 3.5mm Audio adapter
• USB - micro USB Cable
• TOSLINK optical audio cable
• User Guide
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC(0.2A - 3.0A)
To reduce the risk of electric shock
Do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
TECHNICAL SPECIFICATIONS
BT Version: 4.2 with aptX Low Latency
Supported Codecs: aptX, aptX Low Latency, SBC, AAC, MP3, FLAC, TFF
BT Range: 30 meters, 100 feet
Input: BT
Outputs: Stereo Analog RCA; Digital Optical & Coaxial (SPDIF)
Input Power: Power Requirement: DC 5V (USB), 200mA (Min), 3A (Max)
Output Voltage: 2.1 Volts RMS
Output Impedance: 57 Ohms
D/A Converter: TI PCM5102A
Frequency Response: 10Hz - 20kHz (+/- 0.5dB)
Signal to Noise Ratio: 112dB
Total Harmonic Distortion: + Noise < 0.02%
Latency: ~30 milliseconds (MS)
Enclosure: Aluminum + ABS
WARRANTY
Don’t worry. Your BluDento BLT-2 is covered under our warranty. For warranty
information please visit:http://bludento.com/contact-bludento/
www.bludento.com
eshop@bludento.com
PRODUCT SAFETY
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. Improper use of this product
can result in potential electrical shock or fire hazards. Please read all safety
and operating instructions carefully before installation and use. Keep these
instructions handy for future reference.
Users of this product are cautioned not to make modifications or changes
that are not approved by BluDento, Inc. Doing so may void the compliance of
this product and may result in the loss of the user’s authority to operate the
equipment.
SAFETY INSTRUCTIONS
Keep product dry to avoid affecting the interior circuitry of the product.
High temperature will shorten the life of electronic device.
Don’t expose to extreme temperatures, it may damage the internal
circuit board.
Don’t drop the product.
Don’t put the product in direct sunlight or place in hot areas.
Don’t use chemical or detergent to clean the product.
Don’t take the product apart or the warranty will be voided.
Using the product at excessive volumes may cause permanent hearing
damage. You can get the most out of your equipment and enjoy great
audio performance even at safe levels.
Due to isolating characteristic of the product, do not use the product at
excessive volume while driving or in any other activity where failure to hear
surrounding sounds could be dangerous.
9.9cm
2.5cm
7.5cm
DESIGNED IN AUSTRALIA – MADE IN CHINA BLUDENTO INC.
©2019 BluDento, Inc. All Rights Reserved.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or
its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated,
registered in the United States and other countries. aptX is a trademark of
Qualcomm Technologies International, Ltd., registered in the United States
and other countries.
Included Accessories:
• RCA - RCA Audio Cable
• RCA - 3.5mm Audio adapter
• USB - micro USB Cable
• TOSLINK optical audio cable
• User Guide
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC(0.2A - 3.0A)
To reduce the risk of electric shock
Do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
TECHNICAL SPECIFICATIONS
BT Version: 4.2 with aptX Low Latency
Supported Codecs: aptX, aptX Low Latency, SBC, AAC, MP3, FLAC, TFF
BT Range: 30 meters, 100 feet
Input: BT
Outputs: Stereo Analog RCA; Digital Optical & Coaxial (SPDIF)
Input Power: Power Requirement: DC 5V (USB), 200mA (Min), 3A (Max)
Output Voltage: 2.1 Volts RMS
Output Impedance: 57 Ohms
D/A Converter: TI PCM5102A
Frequency Response: 10Hz - 20kHz (+/- 0.5dB)
Signal to Noise Ratio: 112dB
Total Harmonic Distortion: + Noise < 0.02%
Latency: ~30 milliseconds (MS)
Enclosure: Aluminum + ABS
WARRANTY
Don’t worry. Your BluDento BLT-2 is covered under our warranty. For warranty
information please visit:http://bludento.com/contact-bludento/
www.bludento.com
PRODUCT SAFETY
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. Improper use of this product
can result in potential electrical shock or fire hazards. Please read all safety
and operating instructions carefully before installation and use. Keep these
instructions handy for future reference.
Users of this product are cautioned not to make modifications or changes
that are not approved by BluDento, Inc. Doing so may void the compliance of
this product and may result in the loss of the user’s authority to operate the
equipment.
SAFETY INSTRUCTIONS
Keep product dry to avoid affecting the interior circuitry of the product.
High temperature will shorten the life of electronic device.
Don’t expose to extreme temperatures, it may damage the internal
circuit board.
Don’t drop the product.
Don’t put the product in direct sunlight or place in hot areas.
Don’t use chemical or detergent to clean the product.
Don’t take the product apart or the warranty will be voided.
Using the product at excessive volumes may cause permanent hearing
damage. You can get the most out of your equipment and enjoy great
audio performance even at safe levels.
Due to isolating characteristic of the product, do not use the product at
excessive volume while driving or in any other activity where failure to hear
surrounding sounds could be dangerous.
9.9cm
2.5cm
7.5cm
DESIGNED IN AUSTRALIA – MADE IN CHINA BLUDENTO INC.
©2019 BluDento, Inc. All Rights Reserved.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or
its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated,
registered in the United States and other countries. aptX is a trademark of
Qualcomm Technologies International, Ltd., registered in the United States
and other countries.
Included Accessories:
• RCA - RCA Audio Cable
• RCA - 3.5mm Audio adapter
• USB - micro USB Cable
• TOSLINK optical audio cable
• User Guide
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC(0.2A - 3.0A)
To reduce the risk of electric shock
Do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
TECHNICAL SPECIFICATIONS
BT Version: 4.2 with aptX Low Latency
Supported Codecs: aptX, aptX Low Latency, SBC, AAC, MP3, FLAC, TFF
BT Range: 30 meters, 100 feet
Input: BT
Outputs: Stereo Analog RCA; Digital Optical & Coaxial (SPDIF)
Input Power: Power Requirement: DC 5V (USB), 200mA (Min), 3A (Max)
Output Voltage: 2.1 Volts RMS
Output Impedance: 57 Ohms
D/A Converter: TI PCM5102A
Frequency Response: 10Hz - 20kHz (+/- 0.5dB)
Signal to Noise Ratio: 112dB
Total Harmonic Distortion: + Noise < 0.02%
Latency: ~30 milliseconds (MS)
Enclosure: Aluminum + ABS
WARRANTY
Don’t worry. Your BluDento BLT-2 is covered under our warranty. For warranty
information please visit:http://bludento.com/contact-bludento/
www.bludento.com
PRODUCT SAFETY
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. Improper use of this product
can result in potential electrical shock or fire hazards. Please read all safety
and operating instructions carefully before installation and use. Keep these
instructions handy for future reference.
Users of this product are cautioned not to make modifications or changes
that are not approved by BluDento, Inc. Doing so may void the compliance of
this product and may result in the loss of the user’s authority to operate the
equipment.
SAFETY INSTRUCTIONS
Keep product dry to avoid affecting the interior circuitry of the product.
High temperature will shorten the life of electronic device.
Don’t expose to extreme temperatures, it may damage the internal
circuit board.
Don’t drop the product.
Don’t put the product in direct sunlight or place in hot areas.
Don’t use chemical or detergent to clean the product.
Don’t take the product apart or the warranty will be voided.
Using the product at excessive volumes may cause permanent hearing
damage. You can get the most out of your equipment and enjoy great
audio performance even at safe levels.
Due to isolating characteristic of the product, do not use the product at
excessive volume while driving or in any other activity where failure to hear
surrounding sounds could be dangerous.
9.9cm
2.5cm
7.5cm
DESIGNED IN AUSTRALIA – MADE IN CHINA BLUDENTO INC.
©2019 BluDento, Inc. All Rights Reserved.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or
its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated,
registered in the United States and other countries. aptX is a trademark of
Qualcomm Technologies International, Ltd., registered in the United States
and other countries.
Included Accessories:
• RCA - RCA Audio Cable
• RCA - 3.5mm Audio adapter
• USB - micro USB Cable
• TOSLINK optical audio cable
• User Guide
NOT included:
• Coaxial audio cable
• Power plug USB 5V DC(0.2A - 3.0A)
To reduce the risk of electric shock
Do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
TECHNICAL SPECIFICATIONS
BT Version: 4.2 with aptX Low Latency
Supported Codecs: aptX, aptX Low Latency, SBC, AAC, MP3, FLAC, TFF
BT Range: 30 meters, 100 feet
Input: BT
Outputs: Stereo Analog RCA; Digital Optical & Coaxial (SPDIF)
Input Power: Power Requirement: DC 5V (USB), 200mA (Min), 3A (Max)
Output Voltage: 2.1 Volts RMS
Output Impedance: 57 Ohms
D/A Converter: TI PCM5102A
Frequency Response: 10Hz - 20kHz (+/- 0.5dB)
Signal to Noise Ratio: 112dB
Total Harmonic Distortion: + Noise < 0.02%
Latency: ~30 milliseconds (MS)
Enclosure: Aluminum + ABS
Table of contents
Other BluDento Receiver manuals
