Blue Mountain RAIN HARVESTING TATS15 User manual

Code
Size
Country
TATS15
400mm / 16in
Global
TATS16
500mm / 20in
High Flow Side Mesh
Tank Screen
Installation and Specification Guide
PRODUCT DETAILS
High Flow, Side Mesh Tank Screens ensure you get
maximum water flow through your tank screen even
as debris loads start to build.
The mesh side walls allow water to flow into the tank
through all directions, which means more water in
your tank, and less chance of splashing.
rainharvesting.com

Installation
WHAT’S IN THE BOX? TOOLS/MATERIALS YOU MAY REQUIRE
High Flow Side Mesh Tank Screen Screws
Screwdriver or drill
HIGH FLOW SIDE MESH TANK SCREEN
rainharvesting.com
1 - If you already have a tank screen installed, remove it prior to installing the new tank screen.
2 - Place the Tank Screen into the inlet hole of the tank, making sure it is approximately centred in the hole,
and that the rim of the tank screen covers the inlet fully.
3 - Secure the Tank Screen in place using screws (up to 8 gauge in size) that are suitable for the tank
material.

COUNTRY
CODE
Tank Hole Size
A
B
C
D
E
Global
TATS15
365-382
414
394
59
75
357
14.37"-15.04"
16.3"
15.5"
2.3"
3"
14.04"
TATS16
455-481
505
492
59
75
447
17.91"-18.94"
19.9"
19.4"
2.3"
3"
17.61"
High Flow Side Mesh Tank Screen
Product Specifications
Dimensions & Pipe Fittings
All dimensions are in mm unless otherwise stated.
rainharvesting.com
A
B
E
C
D

rainharvesting.com
A common misconception about collecting rainwater is that all you need is a
roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to
deliver the volume – or quality – of water that you require. That is where we can
help.
With some thought, your rain harvesting system can provide you with cleaner
water and lots of it. Whether you’re completely reliant on tank water or wanting
to keep the garden green, our simple steps will help you achieve your goal.
The Rain Harvesting approach to rainwater collection involves using tested and
proven products to make quality rainwater available for use in and around your
property. You don’t need much to get started and you will be surprised how
easy it is to get the most out of your rainwater system.
How can we help you?
You should regularly inspect your Tank Screen and remove any leaves or debris. For a more thorough
clean, unscrew your Tank Screen and hose it off before reattaching to your tank.
We recommend covering the hole in your tank while cleaning the screen to prevent mosquitoes getting in.
For even easier maintenance, consider using a Maintenance Tray – a second, removable screen with
handle that sits on top of your tank screen and captures the majority of leaves and debris for easy
removal. Alternatively, you may wish to consider installing a Maelstrom Filter rather than using a Tank
Screen and Maintenance Tray.
Maintenance
DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the Installation and Operating
Instructions. This specification sheet must be read in conjunction with the Installation and Operating Instructions and all applicable statutory requirement. Product specifications may
change without notice. © Rain Harvesting Pty Ltd

For more information or to find out
how we can help, just give us a call on
[phone]
Or visit our website at
rainharvesting.com