Blueair Aware User manual

Blueair Aware
User Manual | 用户手册| 使用者手冊|
󱾫󳨵󸒂󴁨󴇦| 󻸛󼐘󾖴󻺓󻟴󻺋
English | 中文(简) | 中文(繁) | 日本語 | 한국어

2
The intelligent, Wi-Fi enabled Blueair Aware™ uses high-tech sensors to measure
indoor air pollution. Data is sent to your smartphone so you can monitor the air
quality in your home from anywhere – and if needed take action to improve it.
Blueair Aware can also be set to automatically control a Blueair Sense+TM air
purifier, giving you better air quality in the simplest possible way.
Before using Blueair Aware, please read this user manual carefully.
Content
General safety information 4
Start it 6
Place it 7
Set it 7
Read it 8
Care for it 9
Help and support 10
Warranty information 10
Technical specifications 11

3
Welcome to your new air monitor
1
2
High-tech sensors
LED bar (shows air quality readings in real time)
Fixed USB cable
Power adapter
3
4
1
2
3
4
English

4
General safety information
Never inject gases or pollutants, or blow smoke or fumes directly toward the
device. Exposure to an excess of pollutants may permanently damage sensing
capacity.
Under conditions of extreme temperature or humidity
Outdoors
Near potted plants
In a dusty environment, such as a building with ongoing renovation
Close to silicone-based glue or any product releasing silicone fumes
Never use Blueair Aware:
Misuse can cause burns, fire, electrocution, and other hazards.
In the sun
Near heat or flames
In/under/next to liquids
With anything on top of it or covering it
In a closet or drawer
Never place Blueair Aware:
Water or spray
A feather duster
A vacuum cleaner
Never clean Blueair Aware with:

5
Try to open the device or make modifications to it
Use the device if it has any damage or isn’t working properly
Plug/unplug the device frequently
Let children under 8 years use the device
Use the device with any non-Blueair accessories
Please do not:
IMPORTANT INFORMATION REQUIRED BY THE FCC
The user manual or instruction manual for an intentional or unintentional radiator
shall caution the user that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received , including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the FCC
radio frequency exposure limits, Human proximity to the antenna shall not be
less than 20 cm (8 inches) during normal operation.
FCC ID: 2AEX3-AAWARE
IC NO: 20267-AAWARE

6
2. Download the Blueair FriendTM app to your smartphone (available for iPhone
and Android).
Start it
1. Plug Blueair Aware into an electrical outlet with the supplied power adapter.
3. Make sure your smartphone is connected to the Wi-Fi network you want
Blueair Aware to be connected to. Start the app and follow setup instructions.
For more information, tap on (Support) > ”FAQ” or ”Troubleshooting”.
4. Now Blueair Aware is connected with your smartphone and ready to guide
you.

7
Place it
Blueair Aware should be placed in the room you want to monitor on a flat,
stable surface with open air around it – preferably at the normal height level
of your nose. For example, on a bookshelf or a side table in the living room or
a nightstand in a bedroom. The more open the placement, the better the air
reading and Wi-Fi connection.
If you have both a Blueair Aware and a Blueair Sense+ air purifier, you can set the
monitor to automatically control the Sense+. Please read the Sense+ user manual
about how to switch on Auto mode.
Set it
In the Blueair app, tap on (Indoor Air) choose the Blueair Aware you want to
set by swiping left or right tap on cog (settings). Here you can change:
LED intensity
Tap in circle to change intensity. Off = all bars are grey.
Tap in circle to switch LED on/off. This setting will only apply during the
times that Night mode is set for.
Tap in circle to set start and end time.

8
Excellent air quality Good air quality Moderate air quality
Slightly polluted air Polluted air
Actions recommended
Read it
You can view how clean your indoor air is both on the Blueair Aware device itself
and in the Blueair app.
On the device the air readings are visualized in real time on an LED bar:
Highly polluted air
Actions vital

9
In the app, tap on the value in the big circle to get more information and recom-
mendations. For detailed information about threshold levels, tap on (Support)
“FAQ” “Measuring air quality”.
Note: Blueair Aware is designed for continuous monitoring, which means the
readings will become more stable over time and optimal after about a week.
Usage conditions can influence the accuracy.
Care for it
Clean the casing only with an anti-static cloth.
If your air quality levels seem abnormal, start the app and tap on
(Support) “Troubleshooting”.
PM2.5 – Particulate matter (e.g. outdoor pollution and smoke)
VOC – Volatile organic compounds (e.g. detergent and color)
CO2– This is a CO2e reading* (Carbon dioxide equivalent)
Temperature (°F/°C)
Humidity (%)
In the app the air quality readings are presented as values of:
* Our CO2equivalent reading is based on VOC gases measured by our sensor.
The reading is a good indicator of CO2in indoor environments.

10
Warranty information
Blueair warrants the included hardware product and accessories against defects
in materials and workmanship. Warranty benefits may vary locally. Full terms and
detailed information about what applies in your country is available at www.blueair.
com. To extend your limited warranty, register in the Blueair app (tap on “Profile”) or
on our website.
Help and support
For more information, start the Blueair app and tap on (Support) “Troubleshoot-
ing”. If you can’t solve the issues, please visit www.blueair.com or contact your local
Blueair retailer.

11
Technical specications
Air Quality Sensing: Particulate matter
Total VOC
Carbon Dioxide
Temperature
Humidity
Size Product (HxWxD): 194x80x80 mm (7.6x3x3 in)
Weight Product (incl. adapter): 410 g
Power: Non detachable USB cable, 1,7 m
Connectivity: Wi-Fi: 802.11B/G/N
Wi-Fi GHz: 2.4
Security: Open/WEP/WPA/WPA2 Personal
Sends and stores data every 5 minutes
On demand instant measurements
iPhones with iOS 8 and upwards
Android 4.1 and upwards
The entire unit can be recycled
External network issues affecting the product performance is beyond the control of Blueair. Please contact your
Internet service provider for assistance.”

12
目录
安全使用指南 14
开机 16
放置 17
设置 17
读数 18
保养及维护 19
帮助中心 20
产品参数 21
这款智能，内置Wi-Fi的Blueair空气通TM，使用高科技的传感系统。监测到的室内
空气质量指数同步更新到您的智能手机，方便您通过手机时时监测您的室内空气
质量。
Blueair FriendTM App可设置自动模式由Blueair空气通监测到的空气质量指数来
只能控制Blueair Sense+TM空气净化机，用最简便的方式带给您更洁净的空气。
在使用这台Blueair空气通之前，请您仔细阅读这本用户手册 。

13
欢迎使用您的Blueair空气通
1
2
高科技传感器
LED灯（带显示实时空气质量）
固定USB接线
电源转接器
3
4
1
2
3
4
中文(简)

14
安全使用指南
请勿直接注入气体或污染物，或对着Blueair空气通吐烟或喷雾，这样会影响
Blueair空气通的传感器敏感度。
极端高温或低温，或者极度潮湿
室外
盆栽植物旁边
灰尘重的地方，比如正在装修的房间
靠近任何硅胶释放物，或硅气味物体
请勿在以下情况使用Blueair空气通
错误使用会导致触电，烧伤，火灾，或其它危害。
太阳底下
靠近明火或高温的地方
液体里面或液体附近
用物体挡住Blueair空气通的上方
放在柜子或抽屉里
请勿将Blueair空气通放在以下地方：

15
水洗或喷雾清洗
掸帚
吸尘器
请勿用以下方式清洁Blueair空气通：
不要私自拆机器或改装机器
如果机器不能正常运作或有任何损坏请勿使用
不要频繁的插入/拔出电源线
不要让8岁以下的孩子用这台机器
使用该设备不要搭配任何非Blueair配件
请注意：
SRRC认证
自1999年6月1日起，中国信息产业部 (Ministry of Information Industry, MII) 强制规定，所有在中
国境内销售及使用的无线电组件产品，必须取得无线电型号的核准认证 (Radio Type Approval
Certification)。根据《进口无线电发射设备的管理规定》和《生产无线电发射设备的管理规定》，为
了加强对进口和生产无线电发射设备的管理，凡向中华人民共和国出口的无线电发射设备，或
在中华人民共和国境内生产（含试生产）的无线电发射设备，均须持有经国家无线
电管理委员会（State Radio Regulation Committee，SRRC）对其发射特性进行型号核准后核发的
《无线电发射设备型号核准证》。出厂设备的标牌上须标明型号核准代码。

16
2.下载Blueair Friend App（适用于安卓和苹果手机系统）
开机
1.将Blueair空气通的USB接线接上电源转接器插入电源板
3.请确保Blueair空气通与Blueair Sense+处于同一个Wi-Fi环境下。打开Blueair
Friend App按照App的安装步骤开始设置。更多信息，按 （支持）再点“常见问
题” 或者“问题解答”。
4. 现在Blueair空气通已连接在您的智能手机上，您可以通过手机操作了。

17
放置
请将这台设备放在您想测试的房间里平稳的地方，高度和您的鼻子齐高是最
合适的，例如客厅内的书桌或边桌上。请保持设备附近空气自由进出和流通
顺畅。空气越流通，测量的空气质量指数越准确。
如果您同时拥有Blueair空气通和Blueair Sense+空气净化机，您可以在Blueair
Friend App上通过Blueair Sense+设置界面自动模式功能与Blueair空气通配对来
自动调节Sense+的风速。请阅读Sense+用户手册里关于自动模式功能。
设置
进入Blueair App应用界面，点击 （室内） 通过向左或向右滑来选择您要
操作的Blueair空气通 点击 （设置），这里您可以做如下设置：
调节LED亮度
点击调节LED灯亮度图标来选择LED灯的开和关。
这里的设置只会在已选择的睡眠模式内的时段启用。
点击灯泡图标调节LED灯亮度。当LED灯关闭时，亮度图标都是灰色。点击
时钟图标来设置开启和关闭时间。

18
空气质量优 空气质量好 空气质量良
轻度污染 中度污染
读数
您可以通过Blueair App或者Blueair空气通设备来查看您的室内空气质量好坏。
在Blueair空气通设备上有一条LED灯反映着您的室内空气质量：
蓝色LED指示灯
重度污染
橙色LED指示灯

19
保养及维护
PM2.5 – 可吸入颗粒物 (例如：室内污染物和二手烟)
VOC – 总挥发性有机化合物（例如：清洁剂和颜料）
CO2– 二氧化碳*
温度
湿度
Blueair App可显示以下室内测试项目：
在Blueair App界面里，点击大圆圈里的数据您可以得到更多的信息和建议。关于
更多各种临界值的信息，请按 （支持） “常见问题” “测试空气质量”。
请用防静电布擦拭本设备
如果您的室内空气数据看起来不正常，请在App上点击 （支持） “问题解
答”
* 这里的CO2指数是基于Blueair空气通测量的VOC指数。这个数据是室内空气质量好坏一个重要的指示。
注意：Blueair空气通是为持续监测室内空气质量而设计，所以测试的时间越长，数据会越精
准，初次使用大概一周左右数据会稳定。
使用方式会影响数据准确性.

20
帮助中心
更多信息，请使用Blueair App，点击 （支持） “问题解答”。如果还不能解
决您的问题，请访问www.blueair.cn 或致电全国统一服务热线 400-006-9693