Bluebird BP30 User manual

www.mypidion.com
Handheld Mobile Computer
BP30
User's Manual
∙Please read the following warnings before using the product.
∙Shapes and colors of the images shown in this manual may differ from the actual products.
∙Contents of the manuals may differ based on the software version of products or conditions of the wireless provider.

2
BP30 MANUAL
• This user manual is protected by copyright.
• This user manual has been created by the Bluebird Inc. We have done our best not to
create typos, editing errors, and leaving out any information. Please understand if there
are any inconveniences.
• This product’s program is legally protected. Illegal copying, transmitting, or erasing of
the program is prohibited.
• This product’s partial functions might have problems from the environment, user
program, and other machines.
• The radio equipment can’t be used for life saving services because there is possibility to
have radio interference and failure.
REGISTERED TRADEMARK
User’s guidance
BLUEBIRD is an emerging global brand, striving to lead the market
in performance and mobility. Their products represent reliability,
innovation, and innovative technology. BLUEBIRD is a registered
trademark from the global brand of Bluebird Inc. and is copyright
protected.
※Please read warnings and cautious before use.
Device type User’s guidance
Class B Device
(Household Infor-
mation and
Communication
Device)
This device has qualified the electromagnetic wave suitable
registration and can be used as a household device at a resi-
dential area as well as any other areas.
Type registration This wireless device may cause propagation interference, and
so, it cannot be used for life-saving services.

3
BP30 MANUAL
Part 15.105 (B)
Note : This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications, However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Modications not expressly approved by the manufacturer could void the user’s authority to
operated the equipment under FCC rules.
FCC 15.407 (g) states
Manufacturers of U-NII devices are responsible for ensuring frequency stability such that an emission
is maintained within the band of operation under all conditions of normal operation as specied in
the users manual.
Since this is an Indoor Only device (required for this band) you do not need to worry about
the extreme frequency Stability over wide temperatures, but you can show that the frequency
Generation portion of this device (from the schematic) has its own stated stability that would never
allow the device to generate emissions or part of the spectrum outside of the authorized band (can
be determined by looking at the Occupied BW plots to see how much margin to the band edge is
available).
If the devices in the future use the other higher frequency UNII bands, and the devices can be
used outdoors, you may need to provide details of stability over a much wider temperature range
(depending on the use conditions stated in the manual).
Most compliance for this requirement is stated from the specication of the frequency generation
portion of the device and not necessarily through additional testing.
Hereby, Bluebird Inc. declares that this BP30 is in compliance with the essential
requirements and other relevant provisions of directive 1999/5/EC.
Use only power supplies listed in the user manual.
Adaptor Info
- Manufacturer : Phihong (Switching Power Supply)
- Model : PSAA10R-050
- Input : 100-240~0.4A, 50~60Hz
- Output : 5V / 2.0A
FCC (Federal Communications Commission)
CE
Warning label (IEC 60417-6044)
To prevent possible hearing damage, do not listen at high volume levels for long periods.
This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following
two Conditions:
1. This device may not cause harmful interference, and
2. This device must accept ant interference received, including interference that may
cause undesirable operation.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition
that this device does not cause harmful interference.
The antenna must be installed such that 0 cm is maintained between the antenna and
users, and the transmitter module may not be co-located with any other transmitter or
antenna.
End users cannot modify this transmitter device. Any Unauthorized modi cation could
void the user`s authority to operate this device.

4
BP30 MANUAL
Notice before using device ..................................... 5
Precautions before using battery ............................. 6
About the product
1. Checking components .......................................... 7
2. Checking names of parts ........................................ 8
3. Buttons ......................................................... 9
Learning basics
1. Battery .......................................................... 10
1-1 Insert the battery ............................................ 10
1-2 Remove the battery ......................................... 12
2. How th use cards ................................................ 12
2-1 Insert the SAM card .......................................... 13
2-2 Insert the MicroSD card ..................................... 13
2-3 Insert the Micro SIM card(Optional) ......................... 14
2-4 Removing the card .......................................... 14
3. Charging the battery ............................................ 15
3-1 Direct charging .............................................. 15
3-2 Cradle charging ............................................. 16
4. Tuning on ....................................................... 17
Using the barcode reader
1. Using the barcode scanner ...................................... 18
2. Scanning Barcodes .............................................. 18
Card reader
1. MSR card reader (MSR models only) ............................. 19
2. NFC card reader ................................................. 19
Device specifications ........................................... 20
Q & A ............................................................. 21
Service Center ................................................... 22
Warranty Certificate ............................................ 24
Contents

5
BP30 MANUAL
Notice before using device
• This device is qualied for the standard of the safety of human body against
electromagnetic wave. For your own safety, please use certied devices provided by
headquarter.
If not the case, we cannot guarantee your safety.
• Do not press power button on the device if the device is wet or do not touch adapter or
power cord with wet hands. There is risk of electric shock.
• Do not remodel, take apart, or repair the device. Please refer to your customer service
center.
If not the case, you will not be able to get your free repair service.
• Please follow instructions when using the battery.
• Do not use your device at an explosive danger zone.
• In case your device is wet, do not put your device in heaters, microwaves, or etc to
dry- there is a risk of explosion or it can be the cause of malfunction.
(Please note there is a label in the device that changes color when it gets wet. In this case
you will not be able to get your free repair service.)
• Do not use your device when boarding a plane or inside of hospitals.
• Please backup the data and information from your device.
During the repair or upgrade, there is a slight possibility of your data being erased.
(Ring tones, text/voice message, characters will be reset.)
• Please refrain from using your device while driving. If you are in an unavoidable
situation, stop your vehicle or use your hand free kit.
• Do not use in places of high temperature and high humidity. The following can be the
causes of malfunction: getting wet from the rain, spilling drinks, and taking it in with you
at the sauna (high temp.)
In these cases, you cannot receive your free repair service.
• Do not place credit cards, phone cards, bankbook, and tickets next to the device.
The magnetic forces of the device can damage the information of listed item.
• Please avoid impacts or vibrations. When the device is not in use, unplug the power
cord and place it at a safe place where it won’t drop.
• Do not place your device at a dusty place. Keep your power cord away from any heating
devices. Unplug the power cord when cleaning. If there are any dusts or residue clean the
power cords pins thoroughly.
• When a battery is not in use for a long time, please charge and store it at room
temperature. Even for fully charged battery, the lifetime can be decreased because of its
own properties of voltage decrease.
• Do not paint your device. It can damage your screen or your device’s exterior.
Also, the paint can peel o and it triggers allergies. If there is allergic reaction, please nd
medical advice.
WARNING
This information is for your own safety. Please observe the following precautions.

6
BP30 MANUAL
Precautions Before Using Battery
• If the battery is taken apart by impact, applied heat, submersion, or hole-drilling, there is
a risk of a dangerous explosion. Please keep away from children and animals.
• Leaving the battery in the vehicles under direct sunlight or any enclosed space with hot
temperature can deform or break down the battery.
• Please do not make any improper contact on battery contact pin with necklaces, coins
or any electric conductors. Do not give any impact by sharp object. There is a risk of
explosion.
• Please use only the designated battery for the device.
If the original battery is not used, the life of the device may decrease and there is a risk of
explosion. (In this case you cannot receive the free repair service)
• When charging the battery, you must use the supplied standard power adapter.
If the original adapter is not used, the battery life may decrease and may explode.
(In this case you cannot receive the free repair service)
• Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
WARNING
These are safety precautions in order to prevent a dangerous accident.
Please use the battery correctly and carefully observe the instructions.
1) Instructions regarding replacement batteries if the batteries are replaceable by the
user.
2) A lithium ion battery pack shall be marked with the following or equivalent:
“CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above (50°C). Follow
Manufacturer’s Instructions.”
This wording or equivalent shall also be included in the instructions packaged with the
battery pack.

7
BP30 MANUAL
About the product
1. Checking components
The images in this User’s Manual may not reect the color and shape of the actual product.
Please contact the Customer Care Center if you wish to purchase any additional or optional
products.
BP30 Main Body
Cradle(Optional)
LCD Protect Film(Optional)
USB Cable (Optional)
Adaptor (Optional)
Battery Cover
Battery

8
BP30 MANUAL
< Front >
< Rear >
2. Checking names of parts
About the product
Receiver
PTT button
Camera
LED Flash
MicroUSB Port
Microphone
Cancel button
Menu button
Home button
Power button
Camera
Illuminance sensor
Audio I/O Port
Battery LED
Screen
Cradle I/O
Connector
Battery cover
Barcode scan button
Barcode Scan Window
Volume Up
Volume Down
Barcode Scan Button
Battery lock
Handstrap hole

9
BP30 MANUAL
Button Function
1. Power button Press and hold to turn the device on or off.
2. Menu button Select the menu.
3. Home button Press to return to the Home screen.
4. Cancel button Tap to return to the previous screen.
5. Volume button Press to adjust the device volume.
6. PTT button PTT(Push-To-Talk) Function.
3. Buttons
About the product

10
BP30 MANUAL
A
B
1-1 Insert the battery
Push the battery to the direction of the arrow.
1. Battery
1 Turn the battery lock.
2Remove the battery cover.
•
Be careful not to damage your fingernails when you remove the back cover.
• Do not bend or twist the back cover excessively. Doing so may damage the cover.
WARNING
Learning Basics

11
BP30 MANUAL
C
D
• Only use the supplied adapter to charge your battery.
WARNING
1 Replace the back cover.
2 Turn the battery lock.
Push down the battery cover.
Learning Basics

12
BP30 MANUAL
A
B
1-2 Removing the battery
Pull out the battery.
• Do not remove the battery before removing the charger. This may damage the device.
WARNING
1 Turn the battery lock.
2Remove the battery cover.
Learning Basics

13
BP30 MANUAL
2. How to use cards
2-1 Insert the SAM card
Insert a memory card with the gold-coloured contacts facing downwards.
Push the memory card into the slot until it locks in place.
2-2 Insert the MicroSD card
Insert a memory card with the gold-coloured contacts facing downwards.
Push the memory card into the slot until it locks in place.
Learning Basics

14
BP30 MANUAL
2-3 Insert the Micro SIM card (Optional)
∙ Do not insert a memory card into the Micro SIM card slot.
WARNING
2-4 Removing the card
Push the card until it disengages from the device, and then pull it out.
Insert a memory card with the gold-coloured contacts facing downwards.
Push the memory card into the slot until it locks in place.
Learning Basics

15
BP30 MANUAL
3. Charging the battery
Plug the small end of the cable into the micro USB port on the device and plug
the normal USB connector of cable into an charger.
Charge the battery before using it for the first time.
Use the charger to charge the battery.
Learning Basics
3-1 Direct charging

16
BP30 MANUAL
As you see in the picture, connect the adapter with the power cable to charge the device.
Power Charging Light
Charging
Red
Charged
Green
WARNING
∙ When the device's battery is low, it may warn you with a ring and
a message.
∙ The charging time can vary depending on the environment.
A new battery is only partially charged. Please charge fully before using.
Learning Basics
3-2 Cradle charging

17
BP30 MANUAL
4. Tuning On
∙The [Power] button on the side.
∙Press the [Power] button shortly due to turn on.
Learning Basics

18
BP30 MANUAL
WARNING
Correct scanning Angle
1. Using the barcode scanner
Using The Barcode Reader
Press the [Scan] button either on the side. Then Start to scan barcodes.
In order to scan accurately, you must scan with the correct angle 10cm away.
∙If you are using Barcodes with special programs, please contact
the manufacturing company.
2. Scanning Barcodes

19
BP30 MANUAL
1. MSR card reader (MSR models only)
MSR card down in the direction of
the arrow shows.
MSR terminal is to the left.
MSR can recognize the card in bi-
directions.
If you touch the picture card as the
payment is to NFC.
Card reader
2. NFC card reader

20
BP30 MANUAL
Physical Characteristics
Dimensions (W x H x D) 77.95 x 158.3 x 22.45mm (The Grip Part)
Weight 361g
Display 5-inch HD Eyelluminate™ Display; 1280 x 720 pixel
BATTERY Rechargable, 3.7V, 4,500mAh, Li-ion
Expansion Slot Customer-accessible MicroSD slot for removable memory cards up to 64G
SIM/SAM Slot 1 SIM (Optional) / 1SAM (for NFC Applications)
Audio
VoWWAN; VoWLAN; PTT ready;
Headset Jack; Dual microphone support with noise cancellation;
support for wired / wireless headsets
Camera Main(Rear): 8 Mega pixel Auto focus Camera with LED Flash;
Sub(Front): VGA Front Camera for Video Conference
BARCODE SCANNER 2D Imager
GPS Integrated AGPS
Performance Characteristics
Processor Powerful Dual Core Cortex-A15 Processor
OS Optional,
Android 4.2; Windows Embedded 8 Handheld
Memory Optional, 1GB or 2GB RAM; 8GB or 16GB storage
Interface Docking connector; Micro USB
User Environment Characteristics
DURABILITY TankSmith™ Technology;
1.8m / 6ft drop per MIL-STD 810G; IP65 Sealing
Operating Temp -20℃ to 60℃ / -4℉ to 140℉
Storage Temp -25℃ to 70℃ / -13℉ to 158℉
Humiditiy 95% non-condensing
COMMUNICATION OPTIONS
WWAN Radio Optional, 4G LTE, HSPA+/HSPA/UMTS, EDGE/GSM
WLAN Radio Optional, 802.11 a/b/g/n (802.11n 2.4GHz and 5GHz)
WPAN Radio Optional, Bluetooth Classs II V4.0
PAYMENT OPTIONS
MSR Optional, Integrated Magnetic Stripe Reader (MSR)
NFC Optional, Integrated contactless Card Reader
Device Specifications
WARNING
∙
Please ask your sales representative for the specs not listed above.