Bluestream AD11AU User manual

AD11AU QUICK REFERENCE GUIDE
01Contact: [e-mail] |[e-mail] |[e-mail]
The Blustream AD11AU has been designed to help correct audio delays incurred when
separating audio and video signals in an AV system. The AD11AU can add a delay of up to 1
second selectable in 15 increments and has a volume adjustment of -75dB to 0dB.
Introduction
• In-line 2ch analogue audio delay with line-level volume control
• Supports 48 KHz/24 Bit sample rates
• Selectable audio delay from 50-1000ms:
- 0-500ms in steps of 50ms
- 500-1000ms in steps of 100ms
• Adjustable line level volume control from -75dB to 0dB
AD11AU
Quick Reference Guide
FEATURES:
1USB Update Port - Micro USB connector used for firmware upgrade
2L/R Analogue Audio Input – RCA L/R 2ch input
3Power LED Indicator - Lit when detecting unit is powered
4Power Port – Use supplied 5V/1A DC adaptor
5Audio Delay Rotary Dial - Rotate to adjust audio delay (see page 2 for delay settings)
6L/R Analogue Audio Output – RCA L/R 2ch output
7Volume Control Rotary Dial - Rotate to adjust volume level (‘0’ = Mute)
Panel Description
1 2 3 4 5 6 7
Rear Panel Front Panel

AD11AU QUICK REFERENCE GUIDE
02Contact: [e-mail] |[e-mail] |[e-mail]
Rotary Dial Audio Delay (ms)
Pos. Delay Pos. Delay
0 0 8 400
1 50 9 450
2 100 A 500
3 150 B 600
4 200 C 700
5 250 D 800
6 300 E 900
7 350 F 1000
Audio Delay Settings
The AD11AU has been designed as an in-line audio delay device
with the ability to alter the delay between 0ms and 1000ms.
Between 0-500ms the delay increments are in 50ms steps.
Between 500-1000ms the delay increments are in 100ms steps.
See the adjacent chart for rotary dial settings.
RevA2_AD11AU_QRG_211220
Specifications
AD11AU
Audio Input Connectors: 2 x RCA analogue le / right
Audio Output Connectors: 2 x RCA analogue le / right
Audio Delay: Rotary dial
Volume Control: Rotary dial
Dimensions (W x H x D): 70mm x 25mm x 73mm
Shipping Weight: 0.4 Kg
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)
Power Supply: 5V/1A DC
Package Contents
AD11AU
• 1 x AD11AU
• 1 x 5V/1A DC Power Supply
• 1 x Mounting Kit
• 1 x Quick Reference Guide
FCC NOTICE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
CAUTION - changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
CANADA, INDUSTRY CANADA (IC) NOTICES
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired
operation of the device.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed
with other household wastes. To prevent possible harm to the
environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was
purchased. They can take this product for environmentally safe
recycling.
Certifications