
ARC11 QUICK REFERENCE GUIDE
03Contact: support@blustream.com.au |support@blustream-us.com |support@blustream.co.uk
RevA3_ARC11_QRG_070820
Integration Notes
• The ARC11 audio extractor can only be used for the extraction of an ARC signal from a display, this will not breakout audio
between source and display under normal HDMI signal distribution.
• CEC (Consumer Electronic Command), or HDMI Control, must be enabled on the display for this unit to receive the ARC signal.
• The distance from HDMI ARC input port on the display, and HDMI input on the ARC11 is specified to a maximum of 5m. Using a
cable longer than this may not yield a stable signal.
• ARC can only be broken out from the designated HDMI ARC Input port on a display.
Package Contents
ARC11
• 1 x ARC11
• 1 x 5V/1A DC USB Power Supply
• 1 x Mounting Kit
• 1 x Quick Reference Guide
Specifications
ARC11
Audio Input Connectors: 1 x HDMI Type A, 19-pin, female
Audio Output Connectors: 2 x RCA analogue le/right, 1 x Toslink optical output
Dimensions (W x H x D): 70mm x 25mm x 23mm
Shipping Weight: 0.4 Kg
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)
Power Supply: 5V/1A DC USB
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION - changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
CANADA, INDUSTRY CANADA (IC) NOTICES
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmentally safe recycling.
Certifications