Bluestream SC11HD-V2 User manual

SC11HD-V2 QUICK REFERENCE GUIDE SC11HD-V2 QUICK REFERENCE GUIDE
02
contact [e-mail] / [e-mail]
01 www.blustream.co.uk
Specifications
Audio Input Connectors: 1x Analogue Le/Right audio (3.5mm stereo
jack)
Audio Output Connectors: 1x RCA (SPDIF) & 1x Analogue Le/Right
audio (3.5mm stereo jack)
Video Input Connectors: 1x HDMI Type A, 19-pin, female
Video Output Connectors: 1x HDMI Type A, 19-pin, female
EDID: 4-PIN DIP Switch
MODE: 4-PIN DIP Switch
Product upgrade: 1x Female Micro USB
Dimensions including connections (W x H x D): 83mm x 15mm x
83mm
Shipping Weight: 0.5kg
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)
Power Supply: 5V/1A DC
Package Contents:
• 1x SC11HD-V2
• 1x 5V/1A DC power supply
• 1x Mounting kit
• 1x Quick Reference Guide
Maintenance
Clean this unit with a so, dry cloth. Never
use alcohol, paint thinner or benzene to
clean this unit.
For the full Blustream SC11HD-V2 User Manual please visit the download area of our website www.blustream.co.uk
Our Blustream SC11HD-V2 is a HDMI 4K scaler, designed for installations with multiple
displays that support dierent maximum video resolutions. The SC11HD-V2 is ideal for
installations with multiple output resolution requirements.
The SC11HD-V2 supports down-scaling of 4K video to 1080p and supports HDCP 2.2 with
advanced EDID management. It also features either de-embedding or embedding audio
within the HDMI signal path.
Introduction
KEY FEATURES:
• HDMI 4K video scaler
• Supports 4K UHD video input (3840 x 2160 @30Hz 4:4:4 with HDR) 3840 x 2160 @ 50/60Hz 4:2:0)
• HDMI output will downscale 4K@24/25/30Hz 4:4:4 to 1080p@24/25/30Hz, and 4K@24/25/30/50/60Hz 4:2:0 to 1080p@ 24/25/30 /50/60Hz
• Supports 10-bit HDR10
• Can be configured to work as either a HDMI audio de-embedder or audio embedder
• HDMI audio de-embedded to both analogue L/R audio and coaxial digital outputs concurrently (2CH PCM only)
• Embed analogue L/R 2CH audio input onto HDMI output
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio transmission
• Advanced EDID management
• HDCP 2.2 support
• CEC and ARC pass through
SC11HD-V2
Quick Reference Guide
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION - changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
CANADA, INDUSTRY CANADA (IC) NOTICES
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmentally safe recycling.
Certifications

SC11HD-V2 QUICK REFERENCE GUIDE SC11HD-V2 QUICK REFERENCE GUIDE
04
contact [e-mail] / [e-mail]
03 www.blustream.co.uk
Rear Panel
7 8
3 2 1 0 EDID Type
Combination of DIP positions
0 0 0 0 Copy EDID from output
0 0 0 1 1080p 2.0ch
0 0 1 0 1080p 5.1ch
0 0 1 1 1080p 7.1ch
0 1 0 0 1080i 2.0ch
0 1 0 1 1080i 5.1ch
0 1 1 0 1080i 7.1ch
0 1 1 1 4K60Hz 4:2:0 2.0CH
1 0 0 0 4K60Hz 4:2:0 5.1CH,
1 0 0 1 4K60Hz 4:2:0 7.1CH
1 0 1 0 4K30Hz 4:4:4 2.0CH
1 0 1 1 4K30Hz 4:4:4 5.1CH
1 1 0 0 4K30Hz 4:4:4 7.1CH
1 1 0 1 DVI 1280x1024
1 1 1 0 DVI 1920x1080
1 1 1 1 DVI 1920x1200
EDID Management
EDID (Extended Display Identification Data) is a data
structure that is used between a display and a source.
This data is used by the source to find out what audio
and video resolutions are supported by the display then
from this information the source will determine what
the best resolution is to output.
While the objective of EDID is to make connecting
a digital display to a source a simple plug and play
procedure issues do arise when multiple displays or
video matrix switching is introduced because of the
increased number of variables.
The SC11HD-V2 will act as an ‘end point’ in the HDMI
signal path. Using the EDID dip-switches pre-determins
the video resolution and audio format of the source
regardless of the video output resolution that the
SC11HD-V2 scales to.
To change the EDID settings move the EDID dip-
switches as required on the front panel of the unit.
Please see adjacent table for settings.
Note: You must power-cycle the SC11HD-V2 aer
changes have been made in order for the EDID settings
to update.
Front Panel
1 2
3 2 1 0 Mode Settings
Combination of DIP positions
1x x 0 Always convert 4K formats to 1080p
0x x 0 Auto convert 4K formats to 1080p when the device detects the display cannot support 4K
x1x 0 HDCP follows the source device
x0x 0 HDCP follows the display device
x x 10 Audio embed mode - embeds the analogue le/right audio onto the HDMI signal
x x 00 Audio bypass mode - allows HDMI audio to pass through
xxx1Mode control by serial USB
xxx0Mode control by DIP switch
Note: You must power-cycle the SC11HD-V2 aer changes have been made in order for the Mode settings to update.
The SC11HD-V2 cannot up-scale to 4K video formats.
Connections:
1MODE dip-switches - adjust the MODE setting for HDMI output - see page 5 for further details
2HDMI output - connect to a HDMI display / end point
3HDMI LED indicator - lit when there is an active HDMI connection to a display / end point
4Le/Right Analogue Audio Output 3.5mm stereo jack - Extract audio from HDMI input source
NOTE: Source audio must be PCM 2 channel
5Coaxial Digital Output - used when audio is de-embedded from HDMI
6Micro USB port - used for firmware upgrade only
Connections:
7Power connection – use supplied 5V 1A DC adaptor
8Le/Right Analogue Audio Input
9HDMI input - connecto to source device
qHDMI LED indicator - lit when there is an active HDMI connection from source device
wEDID dip-switches - adjust the EDID setting for source input - see page 4 for further details
9 11
3 4 5 6
10
Mode Management
Panel Descriptions