Bluestream PAC500AU TX User manual

www.blustream.co.uk
PAC500 AU QUICK REFERENCE GUIDE
02
Package ContentsSpecifications
Maintenance
PAC500AU
• 1x PAC500AU TX
• 1x PAC500AU RX
• 1x Quick Reference Guide
Clean this unit with a so, dry cloth.
Never use alcohol, paint thinner or
benzene to clean this unit.
NOTE: Specifications are subject to change without notice. Weights and dimensions are approximate.
PAC500AU TX and RX
• Audio Input/Output Connectors: 2x RCA analogue le/right
• CAT Input/Output Connectors: 1x RJ45
• Casing Dimensions (W x H x D): 79mm x 55mm x 24mm
• Dimensions including connections (W x H x D): 79mm x 63mm x 24mm
• Shipping Weight: 0.4kg
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature : -4°F to 140°F (-20°C to 60°C)
RevA1_QRG_PAC500_180814_Print Layout
Panel Description PAC500AU TX and RX
1Analogue audio le/right input/output 2CAT cable input/output
1 2
NOTE: PAC500AU TX/RX units can used as both a transmitter or receiver
FCC NOTICE
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
CAUTION - changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
CANADA, INDUSTRY CANADA (IC) NOTICES
This Class B digital apparatus complies with Canadian ICES-
003. Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device
must accept any interference, including interference that
may cause undesired operation of the device.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not
be disposed with other household wastes. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources.
To return your used device, please use the return and
collection systems or contact the retailer where the
product was purchased. They can take this product for
environmentally safe recycling.
Certifications

Package Contents
Maintenance
PAC500AU
• 1x PAC500AU TX
• 1x PAC500AU RX
• 1x Quick Reference Guide
contact [e-mail] / [e-mail]
PAC500 AU QUICK REFERENCE GUIDE
Quick Reference Guide
PAC500AU
01
Our PAC500AU Audio over CAT cable extender transmits analogue audio
signals up to distance of 500m. This plug and play device requires no
power supply making it ideal for simple installations in which analogue
audio needs to be extended over long distances.
Introduction
FEATURES:
• Extend analogue audio signals up to distances of 500m over a single CAT cable
• Passive solution - Extender kit does not require a power supply
CAT Cable
PAC500AU TX/RX
L R
Analogue audio CAT Cable
PAC500AU TX/RX
L R
Analogue audio