BlueTees 3 MAX+ User manual

USER MANUAL
MAGNETIC LASER RANGEFINDER

FEATURES 2
WHAT’S IN THE BOX? 2
OPERATIONS 3
LED DISPLAY 4
HOW TO USE 5
Charging the Device 5
LED Charging Indicator 5
Slope Switch 6
The Advantage of Slope 6
Red/Black Control 7
SPECIFICATIONS 8
IMPORTANT SAFETY INFORMATION 9
WARNINGS 10
CLEANING & GENERAL CARE 11
RANGING TIPS 12
TROUBLESHOOTING 12
COMPLIANCE 13
WARRANTY 15
1ENGLISH
TABLE OF CONTENTS

FEATURES 2
WHAT’S IN THE BOX? 2
OPERATIONS 3
LED DISPLAY 4
HOW TO USE 5
Charging the Device 5
LED Charging Indicator 5
Slope Switch 6
The Advantage of Slope 6
Red/Black Control 7
SPECIFICATIONS 8
IMPORTANT SAFETY INFORMATION 9
WARNINGS 10
CLEANING & GENERAL CARE 11
RANGING TIPS 12
TROUBLESHOOTING 12
COMPLIANCE 13
WARRANTY 15
2ENGLISH
USB-C to USB-A
Charging/Data Cable
Weather-Proof
Carrying Case
Series 3 Max+
Rangefinder
WHAT’S IN THE BOX?
FEATURES
Blue Tees
Cleaning Cloth
Blue Tees Golf
Crossed Tees Sticker
Quick-Start
Guide
Wrist
Lanyard
Mountaineer
Buckle

3ENGLISH
OPERATIONS
Laser Emitter / Objective Lens
Laser Receiving Lens
Slope Switch
USB-C Charging Port
Eye Lens
LED Charging Indicator
1
1
2
2
3
3
4
4
5
6
Focus Ring Eyepiece
Power On / Start
Red / Black Control Button
Mode / Meter & Yard Button
Magnetic Strip
6
7
7
8
8
9
9
10
10
11
11
5

4ENGLISH
LED DISPLAY
Distance Icon
Flag Lock Icon
Slope Angle
Feet Icon
1
2
3
4
Slope Adjusted Distance
5
Meter/Yard
6
Beeline Distance
7
Battery Indicator Icon
8
• Click once on the MODE button to change MODE.
• Long press for 3 seconds to change measurement unit
between METER or YARD
• Press and hold the power button when measuring the target,
the SCAN icon will show up (M1)
1
2
3
8
5
6
7
MODE 1: SCAN
Press and hold POWER
button to scan the area for
quick, easy distances to
bunkers, hazards, trees, etc.
MODE 2: GOLF MODE
Press and hold POWER
button on the desired
flag/target, unit will vibrate
once the flag lock distance
has been acquired.

5ENGLISH
HOW TO USE
1. Fully charge the rangefinder, using the USB-C cable included, for minimum 2 hours before
use of product.
2. Look through the eyepiece and turn the focus dial clockwise or counter clockwise until the
image is sharp.
3. Press the power button to turn on your Series 3 Max+. The display will turn off automatically
when not in use.
4. Press the MODE button to select the Mode you need.
[SCAN] for continuous measuring
[GOLF] for golfing
5. Press and hold the MODE button for 2-3 seconds to change the measure unit from Meters to
Yards. (M/Y)
6. Aim the target through the cross on the display. Press and hold the start button to get a
continuous reading as you move the rangefinder to scan the course.
[Applicable to SCAN mode]
7. Aim the target through the cross on the display. Press the start button once aligned with your
target.
[Applicable to GOLF mode]
8. Press the RED / BLACK CONTROL button to switch between color modes
CHARGING THE DEVICE
This device is powered by a non-removable, built-in lithium-ion battery that can be charged using
any standard USB port on your laptop/computer or an AC adapter.
WARNING: This product uses a Lithium based battery. Lithium batteries can overheat and
cause damage if physically abused. Do not use batteries that are damaged or show signs of
physical wear.
Note: This device will not charge/operate outside of the approved temperature range (page X)
1. Insert the small end (USB-C) of the provided charging cable into the USB-C charging port on
the device.
2. Insert the large end (USB-A) of the provided charging cable into an external power source,
such as a USB port on your laptop/computer or an AC adapter.
3. Remain inserted until device is fully charged.
STATUSLED CHARGING INDICATION
The battery is below 10% or chargingSolid Red
The device battery is fully chargedSolid White

6ENGLISH
SLOPE SWITCH
The Slope Switch gives the ability to
turn the Slope function on or off in Golf
Mode allowing for tournament play. The
red background on the switch will
indicate when slope is turned on.
THE ADVANTAGES OF SLOPE
The distance to the black flag in the drawing (see below) is 156.8 yards, an uphill shot of 7° really
plays at 176.8 yards. Without the slope adjusted distance function, you would come up 20 yards
short (applicable to Golf Mode). The slope adjusted distance will be displayed as the play as
distance below the line of sight distance.
NOTE: This product conforms to USGA rules and regulations.

7ENGLISH
RED / BLACK CONTROL
The RED / BLACK CONTROL button
allows for a manually changing of the
display color for your preferred setting
based on the environment. In high light
environments, the display is best shown
in BLACK. In low light environments, the
display is best shown in RED.

8ENGLISH
Range Distance
Magnification
Laser Classification
Accuracy
Measuring Time
Lens Coating
Battery Type
Battery Capacity
Working Time
Input Type
Input Voltage/Current
Dimensions
Net Weight
Dual Color Display
Slope Switch
Flag Lock + Vibration
Waterproof
Temperature Range (Operational)
SPECIFICATION
5 - 1000 Yards
6x
Class 1
±1.0y or ±0.1%
.5 - 1sec
Fully Multi-Coated (FMC)
Internal Rechargeable Lithium-Ion
3.7V/1000mAh
~50 rounds of golf (5,000+ actuations)
USB Type-C (Waterproof)
3.7V/0.5A
0.22kg = 7.76 ounces
117 * 40 * 72mm
Manual (Red/Black)
Yes
Yes
No
-5°C to 45°C
Temperature Range (Standby) -10°C to 45°C
Temperature Range (Charging) 0°C to 45°C
Storage Environment Temperature -5°C - 35°C RH<70% (recommended 25°C±5)
Recommended Temperature Range 5°C - 35°C
PRODUCT SPECIFICATIONS

9ENGLISH
To help ensure reliable operation, the following care and maintenance guidelines are
recommended:
1. Please read this manual carefully before use and store it for reference.
2. Do not disassemble or repair this device personally, otherwise it may cause product damage
or personal injury.
3. Do not use it in dusty, humid, dry, and high-temperature environments.
4. Do not place this product near mechanical vibration, a heat source, in direct sunlight, or in
dusty areas.
5. In order to reduce the risk of fire, please do not cover this product with newspapers,
tablecloths, curtains, etc., during use.
6. If the product is damaged (liquid enters or objects fall into the device, unable to operate
normally or falls, etc.) it must be repaired.
7. When the product is fully charged, do not connect it to the charger for further long-time
charging.
8. The maximum ambient temperature should not exceed 45ºC.
9. For the first use, please fully charge this product.
10.Use a certified adapter that has passed the national safety certification.
11.Be sure to fully charge once a month to maintain its performance.
12.Do not use this product in an extremely cold or hot environment. (Temperature range is
beyond -5ºC- 45ºC) If used beyond the range, the product may stop automatically to protect
the internal circuit.
13.When charging in a high temperature environment, the product may automatically stop
charging to protect the battery. The charging indicator will quickly flash to indicate that the
environmental temperature or the product internal temperature is too high.
14.Storage environment temperature: -5ºC ~ 35”C RH<70% (recommended 25º±5).
15.Avoid exposing the unit to extreme environmental conditions for a prolonged period of time.
16.This unit is not waterproof and should not be submerged in any liquids.
17.Avoid severe impacts on the unit.
IMPORTANT SAFETY INFORMATION

10ENGLISH
1. Do not stare directly at or into the laser beam.
2. Do not aim the rangefinder at the sun. Your eyes and the components inside can be
permanently damaged looking into the sun with this device.
3. Keep the eyepiece away from direct sunlight.
4. Before use, fully charge the device with the provided USB-C charging cable for minimum 2-3
hours.
5. Do not attempt to open the Series 3 Max+ Rangefinder. Unit contains a lithium ion battery.
6. Do not attempt to open, disassemble or service the internal battery. The battery is not
replaceable.
7. Do not crush, puncture or short the battery’s external contacts.
8. Do not expose to temperatures above 140° F (40° C). Do not charge battery when
temperature is over 113° F (45° C). Do not store unit in temperatures above 113° (45° C) or
below 32° F (0° C). Properly recycle or dispose of the battery. Do not dispose in fire or water.
WARNING: The Magnetic Strip feature included with The Series 3 Max+ Rangefinder contains a
Neodymium magnet. Magnets could affect the functioning of pacemakers and implanted heart
defibrillators. If you use these devices, keep sufficient distance from magnet. Warn others who
wear these devices from getting too close to magnets.
• Magnet may lose part of its adhesive force permanently if exposed to temperatures
above 175° F (80° C).
• Magnets produce far-reaching, strong magnetic field. They could damage TVs and
laptops, computer hard drives, credit and ATM cards, data storage media, mechanical
watches, hearing aids and speakers. Keep unit away from devices and objects that
could be damaged by strong magnetic fields.
• Keep magnets at least 3 feet away from these devices.
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND
RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
WARNING
Legal Disclaimer
By using this product, you agree that Blue Tees Enterprises, LLC Products will not be held legally
responsible for any injury or damage to you or any person or property caused by the user’s
improper operation and/or poor judgment while using this product.
Note: See Limited Warranty for other limitations to our liability.
WARNINGS

11ENGLISH
The lens of your laser rangefinder is fully multi-coated for the highest light transmission. As with
any multi-coated optics, special care must be taken in cleaning the lens. Follow these tips for
proper lens cleaning:
• Blow away any dust or debris on the lens (or use the Blue Tees cleaning cloth).
• To remove dirt or fingerprints, clean with the Blue Tees microfiber cloth rubbing in a circular
motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and
eventually cause permanent damage. The washable microfiber cleaning cloth included with
your rangefinder is ideal for the routine cleaning of your optics. Simply breathe lightly on the
lens to provide a slight amount of moisture, then gently rub with the microfiber cloth.
• For a more thorough cleaning, photographic lens tissue and photographic lens cleaning fluid
or isopropyl alcohol may be used. Always apply the fluid to the cleaning cloth - never apply it
directly on the lens.
• The rangefinder is water resistant, but should not be exposed to heavy rain or other direct
streams of water. Additionally, it will not withstand submersion in water or other liquids.
NOTICE
1. To protect the lens coating, do not touch the lens surface with your fingertips.
2. If the lens gets dirty, gently wipe with your Blue Tees cleaning cloth.
3. The Series 3 Max+ has been precisely calibrated. Do not disassemble. If a repair is needed,
contact us at [e-mail]
4. Store your rangefinder in a dry, cool, and ventilated place, such as the provided carrying case.
5. Avoid collision or heavy pressure when carrying or using the rangefinder.
6. Rain and fog may affect the laser ray path, which may cause incorrect measurements.
7. Use caution when using the built in magnetic strip to attach the Series 3 Max+ to the golf
cart. Be careful driving over rough terrain. Heavy bumps, potholes or curbs can cause the
rangefinder to fall off, incurring damage that is not covered under the two year limited
warranty.
CLEANING & GENERAL CARE

12ENGLISH
• Be aware that snow, rain, and fog will have an adverse effect on ranging ability.
• Shiny, reflective surfaces will usually reflect better than dull, textured surfaces.
• Ranging under cloud cover can improve performance compared to bright sunny conditions.
• The position of the sun compared to the rangefinder and/or range target will greatly affect
performance.
• Flat surfaces perpendicular to the laser pulse will reflect better than curved surfaces or
surfaces angled in relation to the laser pulse.
• At longer distances, larger objects will be ranged easier compared to smaller objects
Never disassemble your laser rangefinder. Damage resulting from unauthorized disassembling
voids the warranty.
If unit doesn't turn on, display does not illuminate:
• Press the power button.
• Ensure that the device is fully charged.
If unit powers down (display goes blank when attempting to power the laser):
• The battery is either weak or low quality. Recharge the battery with the USB Type-C charging
cable provided (min. 3.7V/0.5A)
If target range cannot be obtained:
• Make sure the display is illuminated.
• Make sure that the Power button is being depressed.
• Keep your hands or fingers away from the objective lenses which will block the laser ray
path. Make sure the rangefinder is held steady while pressing the Power button.
NOTE: The last range reading does not need to be cleared before ranging another target. Simply
aim at the new target and press the Power button to acquire new readings.
WARNING: This product uses a Lithium based battery. Lithium batteries can overheat and
cause damage if physically abused. Do not use batteries that are damaged or show signs of
physical wear.
RANGING TIPS
TROUBLESHOOTING

13ENGLISH
COMPLIANCE
WARNING: As with any laser device, do not directly view the emissions for long periods
with magnified lenses.
FDA SAFETY
Complies with 21CFR1040.10 and 1040.11 except for conformance with IEC60825-1 Ed.3., as
described in Laser Notice 56, dated May 8, 2019.
Caution- use of controls or adjustments or performance of procedures other than those speci-
fied herein may result in hazardous radiation exposure.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cable must be used with the equipment in order to comply with the limits for
a digital device pursuant to Subpart B of Part 15 of FCC Rules. Specifications and designs are
subject to change without any notice or obligation on the part of the manufacturer.
Important Note: Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled envi-
ronment. This equipment should be installed and operated with a minimum distance 0 cm
between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
CLASS 1 LASER PRODUCT

14ENGLISH
Industry Canada Statement:
This device complies with ISED's license-exempt RSSs. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
This device complies with the Industry Canada portable RF exposure limit set forth for an
uncontrolled environment and is safe for the intended operation as described in this manual.
Further RF exposure reduction can be achieved if the product can be kept as far as possible
from the user's body or if the device is set to a lower output power If such function is available.
Disposal of Electric & Electronic Equipment
This device contains electric parts; therefore, it cannot be disposed of as normal household
waste. Instead, it should be taken to your respective collection point for community recycling,
your local waste company or the store where you originally purchased your device.
MADE IN CHINA
COMPLIANCE

15ENGLISH
TWO-YEAR LIMITED WARRANTY
Your Blue Tees Golf®laser rangefinder is warrantied to be free of defects in materials and
workmanship for two years after the date of purchase. In the event of a defect under this
warranty, we will, at our option, repair or replace the product, provided that you return the
product postage prepaid. This warranty does not cover damages caused by misuse, improper
handling, installation, or maintenance provided by someone other than a Blue Tees Golf®
Authorized Service Department.
REGISTER YOUR RANGEFINDER WARRANTY
Scan the QR code below to register your two year limited warranty or visit us at
www.bIueteesgolf.com/pages/register
ENHANCED WARRANTY

Questions or concerns about your S3 Max+?
Reach out to us at suppor[email protected]