boAt AAVANTE BAR 1300 User manual

Model No.: - AAVANTE BAR 1300
Bluetooth Name: Aavante Bar 1300
2.0 HOME AUDIO SOUNDBAR
HDMI (ARC)
Compatible
USB
Compatible
AUX
Compatible
Digital Optical
Compatible
BT
Compatible
Discover a new era of immersive, cinematic audio experience at home with boAt
AAVANTE BAR 1300. With a powerful 60W total audio output, the sleek and slim sound
bar brings every aspect of your entertainment be it music, shows or movies to a new life
in the volume and clarity it deserves. The 2.0 channel sound system provides a balanced
sound and deep bass for your movies, music and even video games, so that you can
experience cinematic sound that revolves around you. Stay plugged into Nirvana with an
array of connectivity options, including the Bluetooth V5.0 wireless technology. Bring your
home to life with AAVANTE BAR 1300.

Model boAt AAVANTE BAR 1300
Technology USB/BT/AUX/HDMI(ARC)/Optical
Drivers 2.25"*4
Output Power 30W*2=60W R.M.S.
Frequency Response 80Hz-20KHz
Signal-to-Noise Ratio ≥ 72dB
Impedance 3Ω*4
Power Input SMPS 110V-240V
Bluetooth V5.0, Range: 10m
Dimensions Sound Bar: 73H*78D*900L mm

1. : Standby mode for power on/o/ Multifunction Button .
2. PAIR: Connect or disconnect to the pairing device.
(Press the button more than 2 seconds).
3. Volume+: Master volume up
4. : Pre button: Previous program (Only work under USB & BT Mode).
5. Volume - : Master volume down
6. MUSIC: Select the Music EQ eect.
7. TR+: Treble Intensity up.
8. TR-: Treble Intensity down.
9.MUTE: Mute mode.
10.INPUT: Input mode(AUX/USB/HDMI (ARC)/OPT/BT).
11. : Next button: Next program. (Only work under USB and BT mode).
12. : Play/Pause (Only work under USB and BT mode).
13. MOVIE: Select the Movie EQ eect.
14. NEWS: Select the News EQ eect .
15. Bass + : Bass Intensity Up.
16. Bass - : Bass Intensity Down.
17. 3D: Select the 3D EQ eect.

Place on a flat Surface
Place the sound bar horizontally on a flat surface such as a TV unit or shelves and align it centrally
with the TV screen. Allow some space between the speaker and the wall. Don’t place inside a cabinet
or an a walled shelf. Follow this guidance for best sound output and good airflow around the sound bar.
Positioning the Sound Bar
Mount on the wall
WARNING: If you don’t feel confident to correctly and securely wall-mount the sound bar, Seek the
assistance of an experienced person or professional.
Install the speaker on a vertical, fast, reinforced area of wall. For plaster walls, it is recommended to
screw into wall studs for greater security. For optimum performance, allow at least 25mm/1’’distance
between the sound bar and the TV.

5. To turn off, press and hold the multi-function button for 2 seconds or unplug from wall outlet
Setting the Soundbar
OPERATION INSTRUCTIONS
1: Plug in the power cord and the display will light up (Standby mode)
2: Switch on the soundbar by using power button on soundbar or by using STANDBY button on remote. After
switching on, the default input mode will appear on display
3: lnput mode can be changed by pressing the power button again or by using the INPUT button on remote
4:Below are input mode names appearing in the soundbar display:
-Bluetooth Pairing mode, -AUX mode, -Optical mode, -HDMI mode, -USB mode,
Playing Audio via BT Connection
1. Turn on sound bar and then short-press the multi-function button to switch to BT mode and the
LED will show
2. Activate the pairing function on your phone or other compatible device and select“Aavante Bar 1300”
3. When successfully paired, you will hear a tone and the LED Display will stay on
4. The remote control includes BT mode playback controls
.
Notes:
• If your pairing device gets switched off or gets manually disconnected, the sound bar will automatically
enter pairing mode
• Successful connection will be re-established with the already paired device(s) once you re-enter
wireless range (10m). To connect to other devices, repeat the above pairing steps.
• There is no automatic shutdown in pairing mode. The sound bar will remain in pairing mode even if
no device is paired, so switch off if not in use

AUX mode
Note: For some computers, you may need to access the audio control panel to manually set the
sound bar as below picture
Playing Audio via USB Port
The sound bar automatically switches to USB input mode with the LED display ( ) when a USB flash drive is
inserted (this mode isn't selectable on the sound bar or remote control unless a USB flash drive is connected).
1. Ensure that your USB flash drive contains MP3 or WMA audio files (other file types not supported)
2. Connect the USB flash drive to the USB port on the sound bar (or your own USB extension cable
connected to the USB port); music will automatically play
3. The remote control includes USB input mode playback controls


Connect the sound bar to your PC, tablet, smartphone, TV, or other device using the included
audio cable. Short-press the multi-function button to switch to audio input mode with the LED Display
lit up ( )
In this mode, playback can only be controlled on your connected device
Optical Mode
HDMI Mode
Use this operating mode to play music from the optical digital input for example from a TV on your soundbar.
The TV must have an optical digital output. Use an optical cable to make the connection.
Proceed as follows:
• Connect the optical cable to the optical digital output of your TV.
• Then connect the optical cable to the optical digital input of your soundbar.
• Switch the TV set and sound bar on. Set the connected TV to “PCM Stereo” or “Stereo 2.1”(For any doubt or
• Start playing on the TV.
• Press the INPUT button on the remote control to select this mode.
• You can use the volume buttons to adjust the volume to your requirements.
• If you wish, you can change the audio settings using the relevant buttons on the remote control.
1. The Soundbar supports HDMI with Audio Return Channel(ARC). lf your TV is HDMI ARC compliant, you can hear
the TV audio through your Soundbar by using a single HDMI cable
2. Using an HDMI compatible cable, connect the HDMI TV(ARC) connector on the soundbar to the HDMI ARC
connector on the TV. The HDMI ARC connector on the TV might be labelled differently. For details, see the TV
user manual.
Once switched to HDMI Mode,
the LED will display ‘ ’.
OPTICALlnput OPTICALOutput
HDMI(ARC) lnput HDMI(ARC) Output
details please refer to the TV manual).
• Once switched to Optical mode, the LED will display ‘ ’.

1300
1300
This symbol alerts you about the presence of uninsutated dangerous
& Smart

doesn’t respond