boAt AAVANTE BAR 1650D User manual

AAVANTE BAR 1650D
USER MANUAL
RAISE THE BAR
2.1CH Dolby
sound bar

AAVANTE BAR 1650D
A compact yet powerful Bluetooth sound-
bar with sleek looks and excellent audio
response.
4 inbuilt speakers with 1 wired subwoofer
provide clarity across a broad frequency
range, with crisp highs and deep bass. An
integral USB port enables playback of
MP3/WAV files directly from compatible
media, with further flexible input options
including Aux, optical, Coaxial, HDMI(ARC)
and Bluetooth.
A convenient and cost-effective TV audio
upgrade that doesn’t compromise on
performance.
2.1CH Dolby sound bar

PACKAGE CONTAINS:
1N Aavante Bar 1650D
1N Remote
1N User Manual
1N Screws for wall mount
1N Aux in Cable
1N Power Cable
1N Warranty Card
1N Catalogue
• Slender and stylish design
• 4 inbuilt speakers for crisp, clear sound with deep bass
• Inbuilt 2.1 channel amplifier with 3 EQ presets
• Versatile input options to support a range of devices
• USB port for MP3 and WAV media playback
• Keyhole slots for wall mounting
• Remote control and Aux cable included
SAFETY PRECAUTIONS
1.Don’t put this product under high temperature wet environ-
ment and it will be worse when it is in the rain or crash strongly.
2.To reduce the risk or electronic shock or fire, do not remove
the cabinet cover simply contact a service professional.
3.In the rear occurrence of malfunction, do not attempt to
repair the unit on your own. Contact a certified service profes-
sional for a proper diagnosis and repair.
4.If fragments or liquids fall into device box, please cut off the
power right away. And it can be used only after professional
staff checks it.
5.Don’t install the unit in or near a place where it may come in
contact with rain, moisture or other liquids.

TECHNICAL SPECIFICATIONS AND FEATURES
Output Power RMS 120W
Speaker drivers 4 x 2.25" 15W units + 1 x 6.5" 60W
subwoofer units
Frequency 45Hz~20KHz
SNR >=80dB
Bluetooth version 5.0+EDR
Bluetooth range Up to 10m
Connections HDMI(ARC) ,Optical, Coaxial ,AUX
in,USB 2.0
Power supply Soundbar: AC In 110-240V,50/60Hz
Subwoofer: AC In 110-240V,50Hz/60Hz
Dimensions Soundbar 940x75x80mm
Subwoofer 305x145x425mm

1.HDMI(ARC): Use to connect compatible devices using a HDMI
cable (not provided).
2. OPTICAL IN: Use to connect compatible devices using an
optical cable (not provided).
3.COAXIAL IN: Use to connect compatible devices using a coaxial
cable (not provided).
4. AUX IN: Use to connect compatible devices using the
3.5mm – 3.5mm stereo jack cable (provided).
5. USB IN: Use to connect a flash drive for direct MP3/WAV
playback (FAT32 format and 32GB max).
6.SW OUT: Use to connect subwoofer.
7.AC IN: Use to connect the AC power supply.
1 2 3 4 6 75
CONNECTIONS

1 (M)：Press to select your preferred input mode
(HDMI(ARC)/BT/OPTICAL/COAXIAL/AUX/USB).
2 (BT) :Press to switch BT Pairing Mode,hold for 3S to
disconnect,and go to pairing mode.
3 (-) :Lower volume button
4 (+) :Increase volume button
5 ( ) :Play/Pause.
6 ( ) :Short press to turn on, long press to turn off.
1
3
2
6
4
5
SOUNDBAR CONTROL

REMOTE CONTROL
Button Function
Power on/off
Mute or recover the volume
Treble+ Increase the Treble
Treble- Decrease the Treble
Bass+ Increase the Bass
Bass- Decrease the Bass
+ Volume turning up
- Volume turning down
Previous track
Pause/Play
Next track
Mode Shifting between BT/USB/
AUX/OPT/COAX/HDMI(ARC)
BT Shifting into BT Mode
USB Shifting into USB Mode
AUX Shifting into AUX Mode
COAX Shifting into Coaxial in Mode
HDMI Shifting into HDMI(ARC) Mode
EQ Shifting to different EQ
3D 3D Surround on/off
USB Repeat modes

LED DISPLAY
1. Red LED: Standby mode
2. bt: Bluetooth mode
3. USB: USB media mode
4. AUX: Auxiliary input mode
5. OPT:Optical mode
6. COA:Coaxial mode
7. ARC:HDMI(ARC)mode
INPUT FUNCTIONS
• Power on/off: Press the Power on/off button on the remote
control or soundbar control panel to turn the unit on and off.
• HDMI(ARC): Connect an HDMI ARC compatible device to the
HDMI(ARC) port on the soundbar using a HDMI cable (not
supplied). Select HDMI(ARC) mode either by pressing the
HDMI(ARC) button on your remote control or repeatedly
pressing the MODE button on the soundbar control panel until
ARC is displayed on the LED display. Ensure HDMI ARC is
selected as the TV’s audio output, then adjust the volume of
soundbar using the Volume up and Volume down buttons on
the remote control or soundbar control panel.
• AUX in: Connect a compatible device using the 3.5mm –
3.5mm stereo jack cable. Select AUX mode either by pressing
the AUX button on your remote control or repeatedly pressing
the MODE button on the soundbar control panel until AUX is
displayed on the LED display. Ensure the connected device is
producing an audio signal, then adjust the volume of soundbar
using the Volume up and Volume down buttons on the remote
control or soundbar control panel.

• Optical in: Connect a compatible device to the OPTICAL input
on the soundbar using a digital optical cable (not supplied).
Select OPT mode either by pressing the MODE button on your
remote control or soundbar control panel repeatedly until OPT
is displayed on the LED display. Ensure Optical SPDIF is
selected as the TV’s audio output, then adjust the volume of the
soundbar using the Volume up and Volume down buttons on
the remote control or soundbar control panel.
• Coaxial in: Connect a compatible device to the COAXIAL
input on the soundbar using a digital coaxial cable (not
supplied). Select COAX mode either by pressing the COAX
button on your remote control or repeatedly pressing the
MODE button on the soundbar control panel until COA is
displayed on the LED display. Ensure Coaxial is selected as the
TV’s audio output, then adjust the volume of the soundbar
using the Volume up and Volume down buttons on the remote
control or soundbar control panel.
• Bluetooth: Press the BT button on the remote control or
repeatedly pressing the MODE button on the soundbar control
panel until bt is shown on the LED display. The LED display will
flash to indicate that the soundbar is in Bluetooth pairing mode.
Ensure that the device you wish to connect is also in pairing
mode and search for Aavante Bar 1650D in its device list. When
the two devices are paired, the LED display on the soundbar
will stop flashing and remain constant. (The soundbar will now
automatically re-pair with this device whenever it is within
range and has Bluetooth turned on.)
• USB media mode: The soundbar is compatible with USB flash
drives of up to 32GB in size and can play MP3 and WAV audio
files directly. Simply insert a compatible drive into the USB port
on the back of the soundbar and the unit will automatically
switch to USB mode and play the first compatible track. USB
repeat mode (also accessed via the remote control) enables
single track repeat (ONE), all track repeat (ALL)
The media player also has a memory function that will recall
and continue from the last-played point when a USB flash drive
that has previously been used with the
soundbar is reinserted.

Note:
Adjust the TV to PCM audio output format,when your TV is
playing non-Dolby video;otherwise ,adjust it back to original
audio format,when playing Dolby Digital video.
• Equalizer modes: The soundbar has 3 equalizer presets,
tailored to complement various styles of music. Press the EQ
button on the remote to choose between Music
(EQ1), Movie(EQ2), News (EQ3).
• Wall mounting: The soundbar has two keyhole slots on the
back to enable wall mounting, using the fixings provided or a
compatible soundbar bracket (not supplied)

AAVANTE BAR 1650D
RAISE THE BAR