Bobot MOP 9030 User manual

Multi-function Cordless
Electric Spin Mop & Waxer
Thanks for choosing
--
Cordless
MOP 9030
Public number Use video

Table of Contents
Product Description................................................................1
Installation.............................................2
Operation.............................................2
Choose Cleaning Cloth......................................................2
Water/Liquid Filling...............................................................2
Turn ON/OFF Switch.............................................................2
Start/Stop, Liquid Spray.......................................................2
Battery Indicator Light.........................................................2
Charging....................................................................2
Troubleshooting..............................................................3
Specification......................................................................3
What’s in the Package......................................................4
Storing.................................................................................4
Limited Product Warranty.................................................5
1

Start/Stop Button
Stretchable Aluminum Tubes
Power Switch ON/OFF
Detatchable Battery Pack
Water tank
Lock Button
Product description
Handle Indicator Light
Liquid Spray Button
Handle Remote Control
Water Filling Hole
This Handle Remote
Control is powered by
AAA battery, please
put AAA battery in the
battery box before use.
LED Light Spray Nozzle
Mopping cloth
2

Upper Side Aluminum Tube
Insert the tube into the upper
handle until the spring stud is fully placed
Lower Side Aluminum Tube
Insert the tube into the joint of
machine until the spring stud is fully placed
Installation
Mopping Cloth Waxing Cloth
Operation
1) Choose Cleaning Cloths
Generally the mopping cloths (in pink) are for mopping, while the waxing cloths (in
blue or green) are for waxing.
Please choose the ideal cloths and velcro them to rotating pads
2) Water/Liquid Filling
Use a measuring cup to fill the water tank with clean water for wet mopping, fill it
with waxing oil if you want to polish/wax wooden floor.
3) Turn ON/OFF Switch
A) Step slightly on the Power Switch, LED Light turns on, you can start using it now;
B) Step slightly on the Power Switch after use, LED light turns off, the machine is off.
If you keep the machine standby for 10 minutes above, it will enter SLEEPING mode
automatically, step on the Power Switch twice to wake it up.
4) Start/Stop, Liquid Spray
Press Start/Stop button to start waxing/mopping;
Press Liquid Spray button to spray water/detergent/cleaning solution/waxing oil
Remarks: when you press the Start/Stop button or Liquid Spray button, the handle
incidator light should be on and red. If the light is not on, please put AAA battery in
the handle battery box, and then restart the machine.
5) Battery Indicator Light
There are three levels of battery capacity, which is
indicated on the detachable battery pack; three
green lights refer 100% battery, two green lights refer
65% battery, and one green light refers % and low
battery, you need to recharge it.
6) Charging
Please only use original adapter supplied by the manufacturer for recharge.
Please charge it when there is only one green light on the detachable battery
pack.
The battery pack is replaceable, however please only use original detachable
battery pack supplied by the manufacturer. Other battery pack may destroy your
device. If you’ve been using the battery for over 1 year and the machine can only
work for less than 15 minutes after full charging, please replace it with new battery
pack.
100%
65% %
1
2
(orange)
Generally the mopping cloths (in orange or pink) are for mopping, while the
waxing cloths (in blue or green) are for waxing.
3

Troubleshooting
Specifications
FAQ
LED works well, no
reaction when press
start/stop button,
liquid spray button,
machine doesn’t work
Water spray failure
Nozzle blocked
Nozzle Leaks
One Green Light on
detachable battery
motors work well.
LED work well,
spraying works well,
motors don’t work
*LED Off
*Spraying failuer
*Motors don’t work
*Lights on battery
pack flicker when
plugged in adapter
Causes
AAA battery runs out
*Lack of water or other liquid
*Air filled in the water pipe
Nozzle blocked
Solid particles in waxing
oil/detergent
Low battery
Over-heated protection
*Over-current protection is
triggered
*Low power
Solutions
Replace AAA battery for the
handle remote control
*Add water or other liquid
*Press spray button several
times to expel air
Use a needle to clean block-
age gently
Rinse the nozzle with clean
water
Recharge battery
Stop using it, switch off the
machine and reuse after it’s
cooled down
Plug in the device for few
seconds to reactivate it
Charge the machine for
several seconds, unplug it
Recharge asap
***IMPORTANT***:
1.Motor temperature increases in the long continuous running. Please make sure to
switch off the machine if overheating protection is triggered. Don't switch the machine
on until it cools down.
2. It's suggested that the machine shall not work for over 20 minutes continuously, as
overheating may cause damage to motor life.
If troubles can't be solved acording to the manual, please contact our after-sale
department for help.
Model No.: MOP 9030
Rated Voltage: DC 14.4V
Rated Power: 60W
Noise Level: <60 dB
Battery Capacity: 2600mAh Lithium
Charging time: 2.5h
Working time:
Water Tank: 300ml
Dimension: 122*39*8.5cm
Net Weight: 3.15kg
Cautions:
A. Make sure the cleaning cloths are used in proper circumstances.
B. Waxing oil is environment friendly and suitable for various floor caring.
However, please avoid excessive use, which may cause the floor too slippery. Normally for
flooring of around 100m2, 80ml of waxing oil should be enough.
C. Empty and dry off the water tank if the machine is to be left unused for a long time.
D. Water tank protection function shall be triggered while water pump works to empty tank
for 3 seconds.
E. Charge the machine with original adaptor in the package only.
4
For continuous product improvement,
we resevetheright to any
and design change
>35min（Dry mopping）
>20min（Wet mopping）

Optional Spare Parts
What’s in the package
Mopping Cloth
Waxing Cloth
Waxing Oil (250ml)
Cleaner | Adapter | Mopping Cloths
Waxing Cloths | Manual | Funnel
***Cautions***
1. Only suitable for smooth surfaces such as tiles, marble
floor, wooden floor etc. Do not use on wall or window or
other uneven surfaces.
2. Do not put MOPA580 in water or other liquid.
3. Do not touch the rotating pads when working.
4. Put mopping cloth or waxing cloth on the rotary
plates before use.
5. When using the machine, be sure that the angle
between the handle of machine and ground level is
within 80 degrees.
*This product should only be used for floor care. Users
are responsible for the damage if it’s operated impor-
perly.
Ground Level
Maximum
Angle 80
Storing
1. Hold the Lock Button at the joint of the Aluminum pole upward, push
the handle downward to shorten the device;
2. Step on the device body, push the handle from backside until the
Buckle locks properly on the device body;
3. Please be sure to unlock the Buckle before reuse after storing. Your
device may be damaged if the buckle is not unlocked during operation.
BOBOT is registered trademark in USA and protected from unauthorized access of use
Manufactrer:BOBOT (USA) TECHNOLOGY CO.,LIMITED
Address:61 Willet St.Unit#qq,Passaic,NJ07055
Made in China,designed in USA
5
Public number Use video