hegen PCTO PPSU User manual

Hegen PCTO™ Drinking Bottle PPSU
Instructions for Use
Phthalate-Free
and PVC-Free

Inspect all items before each use. Throw away at the first sign of damage or weakness. The bottle and accompanying parts
may blur after repeat use, wash, warming and sterilising. For safety and hygiene reasons, we recommend replacing
components every 6 months.
For more information on our products, please visit www.hegen.com
For your child’s safety and health
WARNING!
Always use this product with adult supervision • Continuous and prolonged sucking of fluids will cause tooth decay • Always
check food temperature before feeding • Keep all components not in use out of the reach of children • Before first use,
clean the product • Inspect before each use. Throw away at the first signs of damage or weakness • Before first use place
in boiling water for 5 minutes. This is to ensure hygiene • Clean before each use • Dishwasher safe (top rack only) – Food
colouring, milk or oil residue that undergo heating processes may stain or discolour parts permanently • Do not warm
contents in a microwave as this may cause uneven heating and could scald your baby • Do not use in a heated oven or
microwave. Always stir heated food to ensure even heat distribution and test the temperature before the serving • This is
not a toy • Do not allow child to play with small parts or walk/run while using bottles or cups • Never attach to cords,
ribbons, laces or loose parts of clothing. The child may be strangled • Do not use abrasive cleaning agents or solvents as
these may cause damage • Do not place components directly on surfaces that have been cleaned with anti-bacterial
cleaners. Plastic materials may be affected by high temperatures and sterilising. This can affect the fitting and aesthetics
of the product • Proper assembly is necessary to ensure a leak free seal.
234
Flip Spout Top
backwards to open
5
1
Place seal securely
along the rim of
the spout
Part
Spout
Seal
Material
Polypropylene (PP)
Silicone
Heat Resistance
-20°C to 110°C
Container Polyphenylsulfone (PPSU) -20°C to 180°C
Spout
Seal
Container

Art 417
Copyright © Hegen
Hegen retains all intellectual property rights to this product and packaging. Including all designs, graphic images and text.
Any reproduction of materials is strictly prohibited and constitutes infringement.
All Rights Reserved.
Patent Pending
Hegen Pte Ltd
438A Alexandra Road
Block A Alexandra Technopark
Unit #02-01 Singapore 119967
Cleaning:
Always wash your hands with soap before cleaning, sterilising and feeding • Before first use, dissemble all parts of the
product, wash with bottle detergent and rinse in clean water thoroughly before sterilising. This is to ensure hygiene. Always
take all components apart and wash the product with bottle detergent immediately after each use • When using a
dishwasher (top rack only), avoid high-heat settings like “sanitary clean” or “heat boost” which may distort components •
Do not use chemically aggressive or abrasive cleaning agents, solvents or anti-bacterial cleaners as these can damage the
product • Cleaning the product with a wired bottle brush may cause scratches • Remember to clean all sides as well as the
base and covers of the bottles.
Sterilising:
Suitable for sterilising by steam (electric), boiling water or cold water tablet/liquid solution. Should you choose to sterilise
by an electric steam steriliser, the sterilising instructions of the sterilisation devices should be carefully observed. For
boiling: Bring the water to boil, submerge components in boiling water for no more than 3 minutes. For sterilisation, all
components should be completely taken apart to avoid different reactions of materials which can cause deformation. All
grease or oil residue should be thoroughly removed before sterilising to avoid permanent staining of parts. Chemical
sterlisation or the use of hand cream and/or sun cream may cause the print to fade.
Assembly:
Proper assembly is required to ensure a leak-free experience. 1)Ensure Spout is assembled with removable seal (Hegen
logo facing outwards) to ensure air tight storage. 2)Hold the assembled Spout and Press-to-Close onto the bottle. 3)To
tighten, turn in clockwise direction. 4)Twist-to-Open in anti-clockwise direction. 5)Flip Spout Top to open for drinking.
Usage:
Before first use, clean the product • Proper assembly is required to ensure a leak-free experience • Do not fill bottle
exceeding the maximum indicated volume line • Do not fully tilt bottle while drinking to avoid choking or spillage •
Recommended for lukewarm or cold beverages • Do not fill with hot liquids or warm contents in a microwave as this
may cause uneven heating and could scald when drinking.