Jumbl Multi-Purpose Steam Cleaner User manual
Multi-Purpose
Steam Cleaner
User Manual
1
2
8
7
9
3
3
4
6
5
A. Introduction
Thank you for purchasing our steam cleaner, and
welcome to the Jumbl™ family. This user manual is
meant to offer you a brief walkthrough of the
device’s features and usage protocols. We hope you
find this manual helpful. For additional information
and technical support, please feel encouraged to
B. Important Information
• Please read and comply with all instructions
included in this manual
• Use steam cleaner for private household
applications only
• Use only appropriate accessories, as described in
the operating instructions
• Do not operate appliance in areas of high pressure
or explosion risk
• Never use appliance in pools containing water
• Appliance should not be used to clean electrical
appliances such as ovens, exhaust fans,
microwave ovens, televisions, lamps, hair dryers,
electrical heating systems, etc.
• Check that appliance and any accessories are in
faultless condition before use
• Do not operate if appliance shows any visible
damage
• If power cord is damaged, arrange for
repair/replacement by a skilled electrician
• If steam hose is damaged, replace only with
manufacturer-recommended part (see spare parts
list for item number)
• Never touch power cord or socket with wet
hands
• Never use appliance to clean objects containing
hazardous substances (e.g. asbestos)
• Never touch hands to steam jet at a short
distance
• Never direct steam jet at persons or animals
• Never leave appliance unattended when in use
• Exercise caution while cleaning tiled walls with
electrical sockets
• Protect power cable from heat, oil and sharp
edges
• Never pour solvents, solvent-containing liquids or
undiluted acids (e.g. detergents, benzene, paint
thinner, and acetone) into water reservoir
• Keep appliance away from excessive moisture or
rain. Do not store outside
Note: Persons with reduced physical, sensory or
mental abilities should not operate this appliance,
unless they are supervised by a person responsible
for their safety or are instructed by these persons in
the use of the appliance. Children should be
supervised.
C. Box Contents
1 x Multi-Purpose Steam Cleaner
1 x Tip Nozzle Attachment
1 x Ironing Brush Attachment (2 parts)
1 x Round Brush Attachment
1 x Glass Squeegee (4 parts)
1 x Detail Steamer Attachment
1 x Lint-Removing Cover Cloth
1 x Steam Head Cleaner Pin
1 x User Manual
D. Parts & Controls
1. Water Reservoir
2. Steam Release Lever
3. Tip Nozzle Attachment
4. Ironing Brush Attachment (shown assembled)
5. Round Brush Attachment
6. Glass Squeegee (shown assembled)
7. Power Button
8. Reservoir Release Tabs
9. Steam Release Lever Lock Switch
E. Operation
Quick Start Guide:
• Press down both Reservoir Release Tabs (#8)
• Remove Water Reservoir (#1) and pull out rubber
cover
• Fill Water Reservoir (#1) with water only, and
close reservoir cover
• Insert Water Reservoir (#1) into steam cleaner
until it clicks
• Plug power cord into any standard wall outlet
• Press the power button and it will light up red
• Allow approximately 15 seconds for heat-up
• Slide Lever Lock (#9) downwards, and depress
lever
Attaching Accessories:
• Select the proper attachment for your steaming
application
• Align attachment’s grooves with the posts on
steam nozzle
• Push in and turn clockwise to secure
Assembling Glass Squeegee (#6):
• Align metal-reinforced squeegee rubber with main
attachment arm
• Swing backing plate lip into main attachment arm
• Insert plastic tightening screw cap and turn
clockwise until tight
Note: This squeegee IS NOT an attachment, and
cannot be connected to the steam cleaner. Use as
independent handheld tool.
Removing the Accessories:
• Exercise caution: Hot water may drip from
accessory when detaching
• Allow steam cleaner to cool off completely
• Slide Lever Lock (#9) upwards, locking Lever (#2)
in place
• Turn attached accessory counterclockwise and
gently pull off steam nozzle
Powering on:
Caution: Water Reservoir (#1) must be installed and
filled. Do not operate Manual Decalcification Pump
(#7) when powered off, as this will pump water into
appliance and spurt it out of steam nozzle when
connecting the power cord.
• Plug power cord into any standard wall outlet
• Allow approximately 15 seconds for heat-up
• Slide Lever Lock (#9) downwards
• Depress Steam Release Lever (#2) to control
steam
Note: During initial startup, steam nozzle may
release irregular, moist vapor. This appliance
requires a short run-in time of up to 1 minute, after
which vapor will be consistent.
JUMBL is a trademark of C&A IP Holdings, LLC
©2013 All Rights Reserved
Distributed by C&A Marketing, Inc.
2 Bergen Turnpike, Ridgeeld Park, NJ 07660
MADE IN CHINA
1-866-849-3049
Powering Off:
• Release Steam Release Lever (#2)
• Allow a few seconds for the steam discharge to
stop
• Slide Lever Lock (#9) upwards, locking Lever (#2)
in place
• Unplug power cord
• Coil power cord around Water Reservoir (#1) and
fasten with a cable clamp
Using the Attachments:
Cleaning Textiles & Upholstery
Always test reaction of textiles on a small area first:
Steam area heavily then allow it to dry. Check for
color or shape changes.
Cleaning Coated/Lacquered Surfaces
Exercise caution when cleaning kitchen and living
room furniture, doors, parquet, and lacquered or
plastic-coated surfaces. Wax, furniture polish, plastic
surfaces or paint can come loose or stain easily. Use
steamer cloth when cleaning such surfaces.
Caution: Never direct steam jet at glued edges as
the edge band may loosen. Do not use steam
cleaner on unsealed wooden or parquet floors.
Cleaning Glass Surfaces
In the event of low outside temperatures –
especially in the winter – gently warm up
windowpane by lightly steaming entire glass
surface. This will prevent temperaturerelated
tensions, which may otherwise lead to glass
breakage.
Caution: Do not direct steam at sealed areas of
window frame.
Steam Nozzle
Use steam nozzle without accessories:
• To remove odors and wrinkles from hanging
clothes, by steaming them at a
distance of 4-8 inches
• To remove dust from plants, by steaming them at
a distance of keep a distance
of 10-15 inches
• For moist dusting, by briefly steaming a cloth and
wiping the furniture with it
Ironing Brush Attachment
• Use with brush attached to remove dust from
garments
• Remove brush and use ironing attachment to iron
garments
• Hold on to garment with one hand and lightly pull
on area being ironed
• With the other hand, move steamer head to and
fro
Detail Steamer Attachment
This attachment is especially suited for cleaning
difficult access areas, joints, fittings, drains, sinks,
toilets, blinds and heaters. The closer it is to
application area, the higher the cleaning effect, as
temperature and steam are highest right at nozzle
output. To clean heavy limescale, drench area in
vinegar and allow to penetrate for 5 minutes prior to
steam cleaning.
Round Brush Attachment
This attachment can be used to remove heavy soils,
but is not suited for the cleaning of sensitive
surfaces.
Glass Squeegee Attachment
Gently cleans, wipes and removes streaks from
windows, mirrors, glass surfaces in shower,
and other smooth surfaces.
• Apply even steam to glass surface with steam
nozzle from an 8-10 inch distance
• Strip glass surface in straight lines from top to
bottom using squeegee’s rubber lip
• Wipe rubber lip and bottom edge of window dry
after each pass
F. Maintenance and Care
Caution: Always disconnect power cord and allow
steam cleaner to cool down before performing any
maintenance work.
Descaling/Decalcification
As limescale builds up in the appliance with regular
use, we recommend following a descaling/
decalcification routine at the following intervals:
Note: Contact your Conservancy Board or the local
water supply company to inquire about the hardness
of your water. If you always use commercially
distilled water it is not necessary to descale the
appliance.
Caution: Please follow dose instructions on
descaling solution packaging. Be careful when filling
and emptying steam cleaner, as descaling solution
can have adverse effects on delicate surfaces.
Starting the Process:
• Unplug power cord
• Allow steam cleaner to cool down completely
• Disconnect any attached accessories by rotating
them counterclockwise
• Press down both Reservoir Release Tabs (#8)
• Remove Water Reservoir (#1) and pull out rubber
cover
Water Hardness dH mmol/l # of Tank Fills
Soft 0-7 1.3 35
Medium 7-14 1.3-2.5 30
Hard 14-21 2.5-3.8 20
Very Hard 21> 3.8> 15
• Fill Water Reservoir (#1) with decalcification
solution
• Close reservoir cover
• Insert Water Reservoir (#1) into steam cleaner
until it clicks
• Hold steam cleaner over washbasin
• Repeatedly depress Manual Decalcification Pump
(#7) until decalcification solution pours out from
open steam nozzle
• Remove Water Reservoir (#1) again, drain and
rinse with clear water
• Allow 8 hours for decalcification solution to take
effect inside appliance
Rinsing Away Dissolved Limescale:
• Press down both Reservoir Release Tabs (#8)
• Remove Water Reservoir (#1) and pull out rubber
cover
• Fill Water Reservoir (#1) with fresh water
• Close reservoir cover
• Insert Water Reservoir (#1) into steam cleaner
until it clicks
Caution: DO NOT plug in power cord
• Hold steam cleaner over washbasin
• Repeatedly depress Manual Decalcification Pump
(#7) Pump for 1 minute to run water through
appliance
• Plug in power cord
• Depress Steam Release Lever (#2) and let water
evaporate for two minutes
• Reconnect desired attachment
• Steam cleaner is now ready for use
G. Warranty
The warranty terms published by the relevant sales
company are applicable in each country. We will
repair potential failures of your appliance within the
warranty period free of charge, provided that such
failure is caused by faulty material or defects in
manufacturing. In the event of a warranty claim,
please contact your dealer or the nearest authorized
Customer Service center.
H. Troubleshooting
Caution: Always disconnect power cord and allow
steam cleaner to cool down before performing any
maintenance work.
Low Steam/No Steam:
• Ensure Water Reservoir (#1) is full
• Decalcify appliance
Steam Release Lever (#2) Does Not Depress:
• Check that Steam Release Lever Lock Switch (#9)
is in unlocked (down) position
Nozzle Attachment is Plugged:
• Disconnect and clean attachment
• Briefly switch on steam cleaner
• Reconnect attachment and tighten by turning
clockwise
• Depress Steam Release Lever (#2) to run steam
through attachment
H. Technical Specications
Dimensions: 7.48” x 3.93” x 11”
Weight (w/o accessories): 2.64 lbs.
Reservoir Capacity: 0.25 Liter (8.45 oz.)
Voltage: 220-240v
Heat Output: 1550w
Reservoir Water Seal: IPX4 Watertight
