Body Life OPT SHR IPL User manual

Machine
erManu


I 


f
I
 
  
 

e I/

 
 
. 
  
     
   
I I 
 
 J     
    
      
     
   
       
   
 

www.bodylifedot.com

Product Display

1
1.1. Product Appearance And Part Description
1.2. Packing List
1.3. Treatment Principle
1.4. Application
1.5. Specifications
4.1. Turn On The Equipment
4.2. Initialization Interface
4.3. Handpiece Selection Interface
4.3.1. SHR Mode
4.3.2. OPT Mode
4.4. Settings Interface
2.1. Clients Safety
2.2. Optics Safety
2.3. Electrical Safety
2.4. Fire Prevention
2.5. Safety Device
3.1. Install Handpiece Stand
3.2. Fill Water And Change Water
5.1. Preventive Maintenance
5.2. Moving The Machine
5.3. Transport The Machine
6.1. Parameter Settings
Contents
Machine Introduction
Chapter 1
Using Notice
Chapter 2
Machine Installation Chapter 3
Product Operations Guide
Chapter 4
Maintenance And Troubleshooting
Chapter 5
Clinical Guide
Chapter 6
Warranty Chapter 7
About Us
Chapter 8

www.bodylifedot.com
2
Chapter 1. Machine Introduction
1.1. Product Appearance And Part Description
Touch screen,
Easy to operate
Key
SHR IPL Handle
Emergency Button
Imported
Plug Connector
Air Fans
Add Water Hole
Fuse
Air Switch
Power Line
Water Level Window
Output Water Hole
Overflow Hole
Pedal

1.2.Packing List
1.3.Treatment Principle
3
OPT SHR IPL can emit high engery light, which can reach the derma layer , it can be
absorbed selectively by the tissue pigmentation and hemoglobin of vascular, it can make
the pigmentation and the expansion capillaries break and explode. Also, this light can
break the hair follicle, and stop the hair grow , also, it can stimulate the collagen regrow
and make the skin rejuvenation . In a word , ipl machine has the functions of vascular
removal , pigmentation removal , hair removal and skin rejuvenation.
1.4. Application
Headpiece x 2
Machine Host x 1
Power Line x 1
Operator Glasses x 1 Customer Goggle x 1
Bracket x 2
Key x 2
Water Nozzles x 3
Foot Switch x 1
Fuse x 1
Skin Rejuvenation
Pigmentation Removal
Vascular Removal Acne removal
Hair Removal

2.2. Optics Safety
4
1.5. Specification
1-50J/cm²
Energy Density (Fluence) ：
Spot Size ：
Pulse Repetition Rate :
15x50mm² ( SHR);12x30mm² (OPT);
10×50mm（SR optional)
Wavelength (Spectrum)：640nm-950nmSHR;560nm-950nmOPT
1-10Hz
Continuous Crystal contact cooling
(-4°C-2°C ) + Air cooling +
Closed water circulation cooling
Cooling:
Stand-by Working: Continuously for 18 hours
Out Put Power 3000W
10.4" True Color LCD Touch Screen
100-240VAC, 20A max., 50/60Hz
Display:
Electrical Requirements:
60 kgsNet Weight :
63*53*126cmDimensions (WxDxH) :
Chapter 2. Using Notice
2.1. Clients Safety
1). Pregnant women;
2). Heart disease;
3). Suffer high blood pressure.
4). Have photosensitive skin or cicatricial diathesis;
5). Have taken any photosensitive medicine recently;
6). Received any IPL peeling treatments within half a year
7). Received any chemical peeling treatments within half a year.
1). Do not wear jewelry, watches or spectacles reflecting intense pulsed light;
2). Intense light can do harm to eyes and cause fire. During clinical treatment,
beautician and customer shall wear goggle;
3). The operating handpiece can not be used outside the scope of this manual;

5
4). Skin might get hurt if it absorbs too much light energy;
5). Put the handpiece on the handpiece stand if you don’t use it;
6). Keep the handpiece crystal clean and do not make cooling gel leak into handpiece;
7). Use cooling gel to protect the skin while treating.
2.4. Fire Prevention
1). The clinic room shall not be easy to get fire;
2). If you cleaned the equipment with alcohol, you shall not turn on the equipment until
it is totally dry;
3). If you don’t use this equipment for a long time, cut off the power supply.
2.3. Electrical Safety
2.5. Safety Device
Air Switch：If the electricity is abnormal, this electricity breaker would automatically
cut off electricity；
Emergency Button：Press it and power is cut off. Turn it clockwise to connect power;
Key switch：It is used to turn on and turn off power;
1). The power supply shall be AC230V±10%,50Hz±1Hz/AC110V±10%,60Hz±1Hz;
2). Before maintenance, turn off equipment and wait for 10 minutes;
3). No one is allowed to disassemble any parts of the equipment except the technical
personnel appointed by our company;
4). If you find the handpiece leaking water, don’t turn on the equipment. If it has been
turned on, please turn it off;
5). The power line of the this equipment could conduct unexpected electricity to earth;
6). People in the clinical room shall know how to turn off the equipment.
Emergency SwitchAir Switch Key switch

6
Chapter 4.Product Operations Guide
Chapter 3. Machine Installation
After purchasing this equipment, make installation and initial system testing.
3.1.Install Handpiece Stand
1). Install handles
2). Connect power line,foot pedal
3.2. Fill Water And Change Water
1). Insert water nozzles to overflow water hole and add water hole
2). Use pipe and Funnel to add water in machine tank
3). Pay attention to water level window and when water flow out, it’s ok
4.1. Turn On The Equipment
4.2. Initialization Interface
Connect the power line,make the air switch up,press the emergency button.
First time using machine,turn on machine and turn off three times,the third time
turn on it and keep 30s.
Power switch on，into “Welcome” interface.（Figure 1）
（Figure 1）

7
7
Touch screen will be in ( Figure 2 )
Choose Language press enter into next interface ( figure 3 )
Treatment model description：SHR for hair removal ，
OPT for different 5 kinds functions. Choose SHR enter into ( Figure 4 )
4.3.Handpiece Selection Interface
（Figure 2）
（Figure 3）

8
8
SHR hair removal operation screen. (Figure 4)
Choose Male or Female,Skin Type. Hair Density , Hair Color and Hair Thickness.
then Enter into Next Main Operate Interface. (Figure 5)
SHR power control range 1—50J/CM²,adjust according customer's
physical condition ,can adjust under treatment.
Screen description:
（Figure 4）
（Figure 5）
4.3.1. SHR Mode

9
Handle refrigeration adjust range:1—5，
adjusting when you need under treatment.(PS:when you do treatment,
you must set the refrigeration range)
Time setting range is 1-10S, this time after the release of the pedal
is not pressed emission time, the cure process can be adjusted.
First column is this cure times above the display,followed by zero
point reset key. The second shows the total number of therapeutic
cure mode To this end, in the background settings interface can be cleared
(at the back will detail how to be cleared).
After all the settings are finished, ready to start charging the
pre-combustion work, then the interface will become standby ,
after 1second becomes a successful pre-combustion and then you
can start to treatment.
(This picture shows the ready status icon display.)
PS：Descripition of Different icons.
1.handle：the inactive state，the active state.
2. normal temperature.
3. normal water flow.
4. the charged state,can work as usual. the uncharged statethe.
5. work status
6. back to (Figure 4)

OPT Operate guide is same with SHR Operate
4.3.2. OPT Mode
10
If you press OPT treatment mode. it will enter into five interface as followed picture;
Choose for different functions Operate guide is same with SHR Operate.
If you would like to set Frequency or other parameters.
Please press this button enter into followed screen.
4.4. Settings Interface
（Figure 6）
（Figure 7）

11
Press that then into ( Figure 8 )
1. is (Figure 6)
2. is (Figure 9)
3. press “+” or “-” to adjust ms.
4. shots count
5. set water temperature alarm number
（Figure 8）
（Figure 9）

12
6. water temperature alarm
7. water flow alarm
8. back to main interface
Chapter 5. Maintenance And Troubleshooting
In order to provide you with the best possible service we ask that you carefully Review
these Pre- and Post-Treatment instructions for the SHR IPL treatments for laser hair
removal and ask any questions necessary to help you fully understand them. If you have
any questions about these instructions, please discuss them with us prior to treatment.
To obtain maximum benefit from your treatments, it is crucial that you understand and
adhere to these instructions. Failure to comply with these instructions may affect your
treatment outcome and increase the likelihood or severity of complications.
We are confident that if you follow these instructions, you will be pleased with the results
of your treatments.
1). Preventive maintenance carried out by our authorized technical personnel.
2). When submitting a service request, please provide the serial number on the
instrument or photos.
3). To contact with our authorized representative.
5.1. Preventive Maintenance
Move the machine, unlock four Footswitch switch, promote the instrument movement.
Before moving the unit, remove the Footswitch switch and power cord. It is forbidden
to drag the handpiece and the power cord.
5.2. Moving The Machine

Preparation:
(1). Unplug the power socket
(2). Unplug the power cord
(3). Unplug the Footswitch switch
(4). Contact our company about transport matter
Attention!
Transportation equipment must use the original packaging materials.
otherwise it will damage the warranty terms.
5.3. Transport The Machine
13
6.1. Parameter Settings
This OPT Hair Removal Treatment Parameters based on the different type skin
customer feedback, which use the OPT Beauty Equipment do a hair removal or skin
care treatment.This Parameter used for the most people, but everyone body will have
some different,the salon treatment operator can do some adjustments combine the
each client detail situation.
Chapter 6. Clinical Guide
Skin Type I
Part Times Refrigerat Frequeny Pulse Energy
Underarm 4~8s 5 1~2Hz 3.1~4.7Ms 15~18J
Face 7~10s 5 2~4Hz 4.6~5.2Ms 16~20J
Back 9~12s 5 4~6Hz 5.0~5.8Ms 19~22J
Arm 10~14s 5 6~8Hz 5.4~6.1Ms 21~24J
Leg 13~16s 5 8~10Hz 5.9~5.8Ms 23~26J

14
Skin Type III
Part Times Refrigerat Frequeny Pulse Energy
Underarm 4~8s 5 1~2Hz 3.1~3.6Ms 11~14J
Face 7~10s 5 2~4Hz 3.4~4.0Ms 16J
Back 9~12s 5 4~6Hz 3.9~4.5Ms 18J
Arm 10~14s 5 6~8Hz 4.3~4.9Ms 20J
Leg 13~16s 5 8~10Hz 4.5~5.1Ms 22J
Skin Type II
Part Times Refrigerat Frequeny Pulse Energy
Underarm 4~8s 5 1~2Hz 3.2~3.8Ms 13~16J
Face 7~10s 5 2~4Hz 3.6~4.2Ms 15~18J
Back 9~12s 5 4~6Hz 4.0~4.7Ms 17~20J
Arm 10~14s 5 6~8Hz 4.3~5.1Ms 19~22J
Leg 13~16s 5 8~10Hz 5.1~5.6Ms 21~24J

15
Skin Type VI
Part Times Refrigerat Frequeny Pulse Energy
Underarm 4~8s 5 1~2Hz 1.8~2.3Ms 7~10J
Face 7~10s 5 2~4Hz 2.1~2.6Ms 9~12J
Back 9~12s 5 4~6Hz 2.5~3.1Ms 11~14J
Arm 10~14s 5 6~8Hz 2.9~3.6Ms 13~16J
Leg 13~16s 5 8~10Hz 3.4~3.9Ms 15~18J
Skin Type IV
Part Times Refrigerat Frequeny Pulse Energy
Underarm 4~8s 5 1~2Hz 2.3~2.9Ms 10~12J
Face 7~10s 5 2~4Hz 2.7~3.2Ms 14J
Back 9~12s 5 4~6Hz 3.0~3.6Ms 16J
Arm 10~14s 5 6~8Hz 3.4~3.9Ms 18J
Leg 13~16s 5 8~10Hz 3.7~4.3Ms 20J

16
1.All products are strictly tested before sale. We can guarantee one-year free repair from
the date of purchasing.
During the guarantee period, we will repair the machine by free if the malfunction is
caused by the quality of our product.
2.The standard of operation and environment should comply with the product specification.
3. Malfunctions caused by the following reasons are out of the scope of our guarantee:
a. Malfunctions caused by abused operation;
b. Malfunctions caused by other artificial factors like move or tear down in proper motion,
or collision, etc;
c. Energy reduce caused by wet environment and dust;
d. Malfunction caused by uncontrollable natural force;
e. Spare parts and accessories of this machine.
Chapter 7. Warranty
Our Engineers
READY TO SERVE YOU!
www.bodylifedot.com