BODYMAX CF800 User manual

SEBR3427.01.01
max. 120 kg
L 93 | W 204 | H 143
~ 90 Min.
CM
115 kg
CF800 Leg Press/Hack Squat Machine
SKU: SEBR3427
Assembly and Operating Instructions

2CF800

3
Content
1 GENERAL INFORMATION 7
1.1 Technical Data 7
1.2 Personal Safety 8
1.3 Set-Up Place 9
2 ASSEMBLY 10
2.1 General Instructions 10
2.2 Scope of Delivery 10
2.3 Assembly 15
3 STORAGE AND TRANSPORT 24
3.1 General Instructions 24
4 TROUBLESHOOTING, CARE AND MAINTENANCE 25
4.1 General Instructions 25
4.2 Faults and Fault Diagnosis 25
4.3 Maintenance and Inspection Calendar 26
5 DISPOSAL 26
6 RECOMMENDED ACCESSORIES 27
7 ORDERING SPARE PARTS 28
7.1 Serial Number and Model Name 28
7.2 Parts List 29
7.3 Exploded Drawing 31
8 WARRANTY 34
9 CONTACT 36

4CF800

5
Dear customer,
Thank you for choosing training equipment from BodyMax.
BodyMax is your reliable partner for home and commercial gym equipment. We are specialized
in cardio and strength training machines for home and commercial use. Our products
are not only strong, durable, and aordable but also designed to t your personal needs.
The BodyMax headquarter is based in Rutherglen, Glasgow. Our brand was created with the intention
of providing innovative exercise equipment at aordable prices for users of all training levels.
You can nd further information at www.bodymax-tness.com.
Disclaimer
©2016 BodyMax® is a registered brand of the company Sport-Tiedje GmbH. All
rights reserved. Any use of this trademark without the explicit written permission
of Sport-Tiedje is prohibited.
Product and manual are subject to change. Technical data can be changed without
advance notice.
Intended Use
The equipment may only be used for its intended purpose.
The equipment is suitable for home use and semi-professional use (e.g. hospitals, clubs, hotels,
schools, etc.). The equipment is not suitable for commercial or professional use (e.g. tness
studio).

6CF800
ABOUT THIS MANUAL
Please carefully read the entire manual before installation and rst use. The manual will help you to
quickly set up the system and explains how to safely use it. Make sure that all persons exercising with
the equipment (especially children and persons with physical, sensory, mental or motor disabilities)
are informed about this manual and its contents in advance. In case of doubt, responsible persons
must supervise the use of the equipment.
Due to ongoing changes and software optimisations, the manual may have to be updated. If
you notice any discrepancies during assembly or use, please refer to the manual uploaded to the
webshop. The latest manual is always available there.
This equipment has been manufactured according to the latest safety knowledge. As far as possible,
potential safety hazards which could cause injury have been eliminated. Make sure to carefully follow
the instructions and that all parts are securely in place. If required, read through the
instructions again to correct any mistakes.
Please pay close attention to the safety and maintenance instructions given here.
The contract partner cannot be held liable for damage to health, accidents or
damage to the equipment when it is not used in accordance with these instructions.
The following safety instructions may appear in this manual:
࣑ATTENTION
This notice indicates potentially hazardous situations which, if not avoided, may result in
property damage.
⚠CAUTION
This notice indicates potentially hazardous situations which, if not avoided, may result in slight
or minor injuries!
⚠WARNING
This notice indicates potentially hazardous situations which, if not avoided, may result in death
or serious injuries!
⚠DANGER
This notice indicates potentially hazardous situations which, if not avoided, will result in death
or serious injuries!
LNOTICE
This notice indicates further useful information.
Retain these instructions in a safe place for future reference, maintenance or when ordering
replacement parts.

7
1 GENERAL INFORMATION
1.1 Technical Data
Weight and Dimensions
Packgaing dimensions (L x W x H) and article weight (gross, incl. packaging) approx.:
Box 1: 189 cm x 29 cm x 14 cm 37 kg / 82 lbs
Box 2: 146 cm x 90 cm x 13 cm 28 kg / 62 lbs
Box 3: 95 cm x 78 cm x 33 cm 56 kg / 124 lbs
Set-up dimensions (L x W x H) approx.: 93 cm x 204 cm x 143 cm
Article weight (net, excl. packaging) approx.: 115 kg / 254 lbs
Maximum user weight: 120 kg / 265 lbs
Maximum load: 272 kg / 600 lbs

8CF800
1.2 Personal Safety
⚠DANGER
+ Before you start using the equipment, you should consult your physician that this type of
exercise is suitable for you from a health perspective. Particularly aected are persons who:
have a hereditary disposition to high blood pressure or heart disease, are over the age of 45,
smoke, have high cholesterol values, are overweight and/or have not exercised regularly in
the past year. If you are under medical treatment that aects your heart rate, medical advice
is absolutely essential.
+ Note that excessive training can seriously endanger your health. Please also note that
heart rate monitoring systems can be inaccurate. If you notice any signs of weakness,
nausea, dizziness, pain, shortness of breath, or other abnormal symptoms, stop exercising
immediately and seek advice from your doctor if necessary.
⚠WARNING
+ This equipment may not be used by children under the age of 14.
+ Children should not be allowed unsupervised access to the equipment.
+ Persons with disabilities must have a medical license and must be under strict observation
when using the equipment.
+ The equipment is strictly for use by one person at a time.
+ If your equipment provides a safety key, the clip of the safety key must be attached to your
clothing before starting your training. In the event of a fall, the EMERGENCY STOP of the
equipment can be initiated.
+ Keep your hands, feet and other body parts, hair, clothing, jewellery and other objects well
clear of moving parts.
+ During use, wear suitable sports clothing rather than loose or baggy clothing.When wearing
sports shoes, make sure they have suitable soles, preferably made of rubber or other non-
slip materials. Shoes with heels, leather soles, studs or spikes are unsuitable. Never exercise
barefoot.
⚠CAUTION
+ If your equipment needs to be connected to the power supply with a mains cable, make
sure that the cable is not a potential tripping hazard.
+ Make sure that nobody is within the range of motion of the equipment during training so as
not to endanger you or other persons.
࣑ATTENTION
+ Do not insert any objects of any kind into the openings of the device.

9
1.3 Set-Up Place
⚠WARNING
+ Do not place the equipment in main corridors or escape routes.
⚠CAUTION
+ Choose a location in which to place the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment.
+ The training room should be well ventilated during training and not be exposed to any
draughts.
+ Choose the place in which to set up the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment.
+ The set-up and mounting surface of the equipment should be at, loadable and solid.
+ If your device is to be mounted on the wall/ceiling, make sure that you use the appropriate
assembly material to avoid possible damages or personal injuries. The contractual partner
accepts no liability for this.
࣑ATTENTION
+ The device may only be used in one building, in suciently tempered and dry rooms
(ambient temperatures between 10°C and 35°C). The equipment should not be used
outdoors or in rooms with high humidity (over 70%) like swimming pools.
+ A oor protective mat/equipment underlay can help to protect high-quality oor coverings
(parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight
unevenness.

10 CF800
2 ASSEMBLY
2.1 General Instructions
⚠DANGER
+ Do not leave any tools, packaging materials such as foils or small parts lying around,
as otherwise there is a danger of suocation for children. Keep children away from the
equipment during assembly.
⚠WARNING
+ Pay attention to the instructions attached to the equipment in order to reduce the risk of
injuries.
⚠CAUTION
+ Ensure to have sucient room for movement in each direction during assembly.
+ The assembly of the equipment must be carried out by at least two adults. If in doubt, seek
the help of a third technically skilled person.
࣑ATTENTION
+ To prevent damage to the equipment and the oor, assemble the equipment on a mat or
packaging board.
LNOTICE
+ In order to make the assembly as simple as possible, some screws and nuts to be used can
already be pre-assembled.
Ideally, assemble the equipment at its later set-up place.
2.2 Scope of Delivery
The scope of delivery consist of the following parts. At the beginning, check whether all parts
and tools belonging to the device are included in the scope of delivery and whether damage has
occurred. In the event of complaints, the contractual partner must be contacted directly.
⚠CAUTION
If parts of the scope of delivery are missing or damaged, the assembly must not be carried out.

NUMBER DESCRIPTION QUANTITY
3Right Rail 1
4Left Rail 1
11 Right Safety Stopper 1
12 Left Safety Stopper 1
18 Right Handle 1
19 Left Handle 1
20 Handle Sleeve 4
33 Dia 25mm Inner Cap 2
11
Content of Box 1

NUMBER DESCRIPTION QUANTITY
2Base Connector 1
10 Rear Upright 1
13 Lower Back Pad 1
16 Shoulder Pad 2
17 50x50mm End Cap 4
23 Pop Pin 1
30 Dia 48mm Inner Cap 2
35 Seat Pad 1
36 Carriage Stop Tube 1
38 Rubber Bumper 4
12 CF800
Content of Box 2

NUMBER DESCRIPTION QUANTITY
1Base Front 1
21 Foot Platform Axle 1
8Shoulder Pad Mount 1
20 Handle Sleeve 2
5 Foot Platform 1
34 Lower Back Pad Hinge 1
22 Outer Foot Platform Adjuster 1
24 Inner Foot Platform Adjuster 1
9 Weight Carrier 1
30 Dia 48mm Inner Cap 2
6 Carriage 1
13
Content of Box 3

NUMBER DESCRIPTION QUANTITY
32 Big Wheel 4
26 Small Wheel 4
31 38x38 Inner Cap 2
29 50x50 Inner Cap 6
28 Long Pop Pin 1
7Leg Press Footrest 1
27 Leg Press Footrest Axle 1
37 30x60 Inner Cap 2
14 Upper Back Pad 1
15 Head Support Pad 1
14 CF800
Content of Box 3

17
H10-12
H10-12
W10
W10
N10
1
18
19
2
H12-13
N12
W12
1
17
H10-12
H10-12
W10
W10
N10
1
18
19
2
H12-13
N12
W12
1
15
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
LNOTICE
+ First loosely screw all parts together and check that they t properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have diculty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer.
Step 1: Assembly of the Base Front and Base Connector
1. Attach two end caps (17) to the base front (1).
2. Attach the right handle (18) to the base front (1) with two bolts (H10-12), four washers (W10)
and two nuts (N10).
3. Attach the left handle (19) to the base front (1) with two bolts (H10-12), four washers (W10) and
two nuts (N10).
4. Attach the base connector
(2) to the base front (1) with
two bolts (H12-13), four
washers (W12) and two nuts
(N12).

Assembly Instructions
W12
3
4
N12
H12-18
H12-18
N12
W12
1
16 CF800
Step 2: Assembly of the Rails
1. Attach the right rail (3) to the base front (1) with two bolts (H12-18), four washers (W12) and
two nuts (N12).
2. Attach the left rail (4) to the base front (1) with two bolts (H12-18), four washers (W12 and two
nuts (N12).

21
22
23
24
5
N10
H10-15H10-2
W10
W10
H10-15
W10
N10
W10
H10-2
1
17
Step 3: Assembly of the Foot Platform
1. Screw one pop pin (23) into the outer foot platform adjuster (22), then insert the inner foot
platform adjuster (24) into the outer foot platform adjuster (22) and lock it into place with the
pop pin (23).
2. Attach the outer foot platform adjuster (22) to the base front (1) with one bolt (H10-15),
two washers (W10) and one nut (N10).
3. Attach the foot platform (5) to the inner foot platform adjuster (24) with one bolt (H10-15),
two washers (W10) and one nut (N10).
4. Attach the foot platform (5) to the base front (1) with one foot platform axle (21), two bolts
(H10-2) and two washers (W10).

Assembly Instructions
Page 10
STEP 4
1.Mount Weight Carrier (#9) to Carriage (#6) with three bolts (A10-2) and three washers (W10).
2.Mount Shoulder Pad Mount (#8) to Carriage (#6) with two bolts (H10-17), four washers (W10)
and two nuts (N10).
3.Connect Carriage (#6), Shoulder Pad Mount (#8) and Weight Carrier (#9) with two bolts (H10-13),
four washers (W10) and two nuts (N10).
9
38
A10-2
H10-17
H10-13
8
W10
N10
W10
638
W10 W10
A10-2
N10
18 CF800
Step 4: Assembly of the Weight Carrier, Carriage and Shoulder Pad Mount
1. Attach two rubber bumpers (38) to the weight carrier (9).
2. Attach the weight carrier (9) to the carriage (6) with three bolts (A10-2) and three washers (W10).
3. Attach the shoulder pad mount (8) to the carriage (6) with two bolts (H10-17), four washers
(W10) and two nuts (N10).
4. Attach the weight carrier (9) to the carriage (6) and the shoulder pad mount (8) with two bolts
(H10-13), four washers (W10) and two nuts (N10).

Assembly Instructions
Page 12
STEP 5
38
17
10
1.Mount Two End Caps (#17) to Rear Upright (#10).
2.Put two Rubber Bumpers(#38) on the sleeves of Rear Upright (#10).
19
Step 5: Assembly of the Rear Upright
1. Attach two end caps (17) to the rear upright (10).
2. Attach two rubber bumpers (38) to the sleeves of the rear upright (10).

10
H12-18
W12
N12
N12
W12
W12
6
36
W12
H12-13
43
2
20 CF800
Step 6: Assembly of the Carriage and the Upright Frame to the Rails
1. Slide the carriage stop tube (36) in between the right and left rails (3 & 4).
2. Slide the carriage (6) in between the right and left rails (3 & 4).
3. Attach the rear upright (10) to the base connector (2) with two bolts (H12-13), four washers
(W12) and two nuts (N12).
4. Attach the rear upright (10) to the right and left rails (3 & 4) with one bolt (H12-18), two washers
(W12) and one nut (N12) each.