BodyTrain T103 User manual

1
MOTORIZED TREADMILL
BodyTrain Walking Elite
INSTRUCTION
Thank you very much for purchasing our product.
Please read this instruction carefully before use it and keep the instruction at proper place.

2
1. CAUTION
To avoid any hurts, please read this manual carefully before using.
For safety purpose do not stand on running belt while start.
Please stop immediately for any feeling of vomit、jerky during using.
Please speed up slowly if needed.
Adjustment of belt is prohibited during using.
It is suggested to wear sports shoes when using the machine.
Children、elder、pregnant women、patients are prohibited to use the machine.
Please clip the safety key on your clothing during using.
Please firmly hold the hard bars during using.
2. SAFETY AND NOTIICE
Please put the machine on flat ground. It is unsuitable to put the machine at following
places:
①Outdoors.(The machine is specially designed for indoor use only)
②Slant ground or slant places on balcony.
③Sunlight area or near heater.
④Big noisy places.
The proper power for the machine is a.c 230V.
Error may be appeared if the power is not stable. Please do not use the same socket
together with computer、air conditioner etc.
It is suggested to wear sports shoes and gym suit when use the machine.
Please speed up or speed down slowly.
Be careful of children or other objects while fold and unfold the machine.
Do not put the machine near to wet object. Error maybe caused by waterdrop.

3
3. CAUTION DURING USE
If you do not feel well before using, please consult with your doctor or coach.
It is not our company’s responsibility for any improper use by user to cause body
injured.
Please pull up plug after using.
Please pull out plug for any movement or change parts for the machine.
Children、elder and pregnant women are prohibited to use the machine. Patients need
doctor’s consultant before using.
Please place the machine on flat places. Do not locate any objects 2M behind the
machine.
Do not start the machine when it is folded.
Waterdrop is prohibited to run into the machine , especially to motor, power line and
plug.
Danger may cause if wearing long dress or other unsuitable dresses during use.
Encloser spaces, air uncirculated places and with flammability places are prohibited to
use the machine.
Do not put any objects on the machine.
Put away the plug from heated place or fire seat.
Please switch off all functions and pull out plug after using.
Please do not stand directly on the belt while starting the machine.
Do not disassemble the machine without conduct of professional person.
Please make sure the running belt is fastened before using.
4. TECHNICAL SPECIFICATION
Product Name
BodyTrain Walking Elite
Power
500W
Voltage
230V
Frequency
50Hz
Speed
1-6Km/H
Net Weight
25Kg
Maximum Weight
100Kg

4
5. ASSEMBLY PARTS
NO
Name
Specification
Pcs
1
Main Frame
1
2
Handrail Control
Panel
1
3
Wheel
2
4
Fix Knob
M12*45
1
5
Hex Wrench
1
6
Screw
M8*50
2
7
Arc Washer
Φ8
2
8
Silicone Oil
1
9
Handrail cap
2
10
Safety Key
1

5
6. Assemble Instruction
1. Put the machine on flat ground.
2. Open the frame.
3. Assemble the handrail,the fast connect plug wire
4. The second by handrail put the frame, fix by screws on handrail.
5. Install the two wheels into the frame and fix by screws.
6. Fix by locking knob and Put on safety key,finished assembly.

6
7.Control Panel
1. Plug in the power, open the power switch（display“ERR”）， put on safety key
（display“OFF”）
2. Screen display“OFF”，Press“ON/OFF”key, the machine will start by 1km/h after 3
seconds。And then press“ON/OFF”key，the machine will stop。
3. Press “+”key for speed up and “-” for slow down，the lowest speed is 1.0KM/H，the fastest
is 6.0KM/H。
4. Press“MODE”key，the screen will display from SCAN、PACE、TIME and CAL。
5. Please pull out safety key，the machine emergency stop。
6. The machine working 30 minutes auto stop，please the machine after using。
8. Unfold Fold and Move

7
Fold：After use, please fold the machine and insert the fix knob. If the long time does not
use the machine can be pushed to the idle position space saving.
Unfold：Put the machine on the ground smoothly, open the fix knob.
9. USAGE OF SILICONE OIL
Pull up tightly of the running belt. Then put the silicone oil
to running board. Then start the machine to running 3
minutes without loading. It is better to maintain like this
every 30 hours working of the machine. This can save
lifetime of parts properly.
10. Runbelt Adjustion

8
(1) Running belt deviate to left
Start the machine by speed at 2-3Km/h without loading, use die nut to make the screw
go 1/4 circle(see fig1). Then make the machine running without loading 1-2 minutes.
Please adjust like this to make the belt till to mid place.
(2) Running belt deviate to right
Start the machine by speed at 2-3Km/h without loading, use die nut to make the screw
go 1/4 circle(see fig2). Then make the machine running without loading 1-2 minutes.
Please adjust like this to make the belt till to mid place.
(3) Running belt logjam
If the running belt is in dead condition, use die nut to make the screw 1/2 circle both left
and right till this logjam solved.
11. Daily Maintain
1. Please switch off and cut off power before checking the machine or clearance.
2. Clear belt and dial plate after used, one time every week at least.
3. Check and tight screws and spines at fixed period.
4. Do not hang up clothes etc to the machine,