Bogen MultiVOIP MVP130BG User manual

•1-, 2-, 4-, or 8- analog ports for communication over an
existing IP network or the Internet
•Ethernet connectivity and full IP compatibility with
existing routers and WAN infrastructure
• Overhead voice paging to multiple locations within a
facility, nearby or branch office buildings, or to remote
locations
• Single- or multi-zone paging at any or all locations when
used with Bogen’s Multi-Zone telephone paging
interface (UTI312)
• Efficiently communicate company-wide emergency
alerts or general announcements
• FXS/FXO connectors on each port for direct connec-
tion to Bogen’s telephone paging interfaces
•Configuration and management using a
Web
browser or Microsoft Windows®
• Utilizes the H.323 or SIP protocols to provide
complete interoperability with other Internet telephony
solutions
•Multi-port models provide contact closure Receive &
T
ransmit in E&M mode
• Connects directly to telephone or PBX
•Single Port Protocol (SPP) allows the use of
dynamic IP addresses
• Voice compression to 5.3K bps per call with
support for multiple algorithms, including ITU G.723
and G.729
•Minimum requirements: Ethernet network, WAN
connection, IP addresses
• Supports H.450 supplementary services to provide for
call transfer, call forwarding, call hold, call waiting and
name identification
• T.38 real-time fax relay for interoperability among other
VOIP equipment
• PSTN fail-over automatically routes calls over the
PSTN network if the IP network is down
• Two-year warranty
Features
Description
Specifications subject to change without notice.
© 2005 Bogen Communications, Inc.
Part No.54-8023-25A Printed in U.S.A. 0507
VOIP Gateways for
Paging
Models MVP130BG, MVP210BG,
MVP410BG, & MVP810BG
Bogen’s voice over IP gateways (Models MVP130BG, MVP210BG, MVP410BG, and MVP810BG) allow
paging communications to be sent over the Internet or Intranet. FXS pass through expands the paging
capabilities of Bogen’s PCM zone paging system by providing a continuous connection between buildings using
a Local- or Wide-Area Network.
Bogen’s VOIP gateways are available in models ranging from 1to 8 ports. Each gateway connects directly to
Bogen paging systems and equipment to provide overhead paging to all locations within a facility or across a
campus without running new lines. The 1-port model supports FXS and FXO. Multi-port models support FXS,
FXO, and
provide contact closure Receive & Transmit in E&M mode .
The VOIP gateways are easily managed locally using a Windows®-based software application or remotely with a
web browser or SNMP.
Bogen’s VOIP gateways can also be used for toll-free voice or fax communications when connected to phones,
fax machines, key systems, PSTN lines, or a PBX to provide real-time, toll-quality voice connections to any office
on your VOIP network.
MVP130BG
MVP210BG
MVP410BG
MVP810BG

Bogen’s VOIP gateways (Models MVP130BG,
MVP210BG, MVP410BG, and MVP810BG) are 1,2,4,
and 8 analog port voice over IP gateways that shall
allow paging communication to be sent over an exist-
ing IP network or the Internet.
All models shall include FXS/FXO for direct connec-
tion to Bogen’s telephone paging interfaces.
All models shall utilize the H.323 or SIP protocols to
provide complete interoperability with other Internet
telephony solutions and shall support SPP protocol
for the use of dynamic IP addresses.
All models shall incorporate PSTN fail-over to auto-
matically route calls over the PSTN network if the IP
network is disabled and shall provide call transfer, call
forwarding,call hold, call waiting, and name identification.
Configuration and management shall be possible using
a Web browser or Microsoft Windows®.
All models shall have a two-year warranty.
The MVP130BG shall measure 4-3/8" W x 1" H x 5-
5/8" D and weigh less than 1lb.The MVP210BG shall
measure 6-1/4" W x 1-1/2" H x 9" D and weigh 2 lb.
The MVP410BG and MVP810BG shall measure 17-
1/2" W x 3-7/8" H x 8" D and weigh 8 lb.
(For Use with Multi-port Models):
The
VOIP Gateway shall provide contact closure
Receive & Transmit in E&M mode.
Architect and
Engineer
Specifications*
50 Spring Street, Ramsey,NJ 07446, U.S.A.
201-934-8500 FAX: [phone]
Web Site: www.bogen.com
Technical
Specifications
Number of Ports: 1,2, 4 or 8
Port Interface: FXO, FXS & E&M support on
each port (MVP130BG supports
FXS and FXO only)
FXS Interface: KTS, telephone set, or fax;
ground and loop start
FXO Interface: PBX station; CO line, loop start,
2-wire
E&M Interface: PBX E&M trunk; 2- or 4-wire
E&M Signal Types: I through V
Dialing: DTMF or pulse
Connectors: 1RJ-48 (E&M); 1RJ-11
(programmable FXS or FXO)
per port
LAN Port
Format: Ethernet/Ethernet II or SNAP
Interface: 10/100BaseT
Command Port
1- & 2-Port Interface: RS-232C/D; RJ-45
(RJ-45 to DB9 cable included)
4- & 8-Port Interface: RS-232C/D; DB25
(DB9 to DB25 cable included)
Speed & Format: 115.2K bps asynchronous
Protocols: H.323 V4, SIP, H.450.2, H.450.4,
H.450.6 & H.450.8, RTP, RTCP,
SMTP, Q.931,T.38 &
Group 3 fax relay, DTMF
out-of-band (RFC 2833)
Bandwidth Management: G.711, G.723, G.726, G.727,
G.729, & proprietary voice
compression, silence
suppression,VAD, CNG
Voice Quality: DiffServ, G.165, G.168, adaptive
echo cancellation, forward error
correction, bad frame
interpolation, tunable latency,
dynamic jitter buffers
Management: Web browser,Windows®,
SNMP agent
Power
Voltage & Frequency: 115V/240V AC, 47/60 Hz
Power Consumption: 1-Port - 4.5 W, 2-Port - 19 W;
4- & 8-Port - 46 W
Dimensions (W x H x D)
MVP130BG: 4-3/8" x 1" x 5-5/8"
MVP210BG: 6-1/4" x 1-1/2" x 9"
MVP410BG/MVP810BG: 17-1/2" x 3-7/8" x 8"
Product Weight
MVP130BG: less than 1lb.
MVP210BG: 2 lb.
MVP410BG/MVP810BG: 8 lb.
Certification
EMC: FCC Part 15 Class A,
EN55022, EN55024,
EN61000-3-2, EN61000-3-3
Safety: CE, UL 60950, EN60950, cUL,
ACA TS-001
Telecom: FCC Part 68, CS-03,TBR21
* Architect and Engineer Specifications are available online in a
Microsoft®
Word document to assist you with preparing your bids.