The Bogen CS1EZ is a pre-assembled 1-watt single-tap ceiling speaker designed for use with 70V amplifier
systems. Comprised of an 8" cone speaker and 13" diameter steel ceiling grille finished with white enamel, the
CS1EZ includes a rear-mounted screw terminal board for fast, easy installation. An accessible volume control
knob is located on the faceplate.
•1W single-tap design
• Screw terminal connections for fast installation
• Works with 70V amplifier outputs
• 8" cone speaker for excellent audio quality
• Heavy-duty, wire-wound volume control with knob
• Pre-assembled for faster installation
• Tile bridge (Model TB8) available to support the
weight of the speaker (not included)
Easy Design®
Ceiling Speaker
Model CS1EZ
Description
Features
Specifications subject to change without notice.
© 1999 Bogen Communications, Inc.
Part No. 54-8006-01B Printed in U.S.A. 0408
Power Rating (RMS): 1watt continuous
Frequency Response: 50 Hz to 12 kHz
Impedance: 4900 ohms (for use on 70V amplifier outputs)
Sound Pressure Level: 95 dB @ 4 ft. with a 1-watt input on axis
Dimensions: 13" Dia. X 3-1/4" D
Product Weight: 3 lb.
Finish: Semi-gloss white enamel
Technical
Specifications
The ceiling speaker shall be a Bogen Model CS1EZ, or
approved equivalent ceiling speaker. The frequency
response shall be 50 Hz to 12 kHz. The on axis sound
pressure level shall be 95 dB, at least four feet with
one watt input. Rated power output shall be 1watt,
RMS continuous. The unit shall have an impedance of
4900 ohms.
The ceiling speaker shall be comprised of an eight-inch
cone speaker with a 70V matching transformer
mounted on a steel ceiling grille painted with white
enamel. The unit shall measure 13" Dia. by 3-1/4" D.
Product weight shall be 3 lb.
Architect &
Engineer
Specifications
50 Spring Street, Ramsey, New Jersey 07446, U.S.A.
201-934-8500 FAX: 201-934-9832
Web Site: www.bogen.com
