Bolton Furniture 2 Shelf End Table User manual

4/12/17 1 of 2 2 Shelf end table
2 Shelf End Table
Thank you for purchasing our 2 Shelf End Table. We have found it helpful to have a second
person present in at least one step of the assembly.
2 Shelf End Table Assembly Instructions
Lay out all parts on a "non-abrasive"surface to avoid scratching furniture.
PARTS
A
B
C
D
QTY.
G
M6*20mm
BOLT 4
F
1
HEX WRENCH
4
M6*35mm
BOLT
E
DRAWING DESCRIPTIONNO.

4/12/17 2 of 2 2 Shelf end table
Step 1
Read through these instructions thoroughly before beginning assembly. We have found this to be of great
value when first assembling this product.
Step 2
Remove all parts and hardware from packing material. Wooden pieces should be placed on a non
abrasive surface (like the carton or carpet) to prevent damage to the finish.
Step 3, 4 and 5
Lay Top (A) upside down and attach 2 Posts (B) by using 2 M6 x 35 Hex Bolts (E).
Note: It will help to have a second person at this time to assist in assembly.
Put shelf (C) and bottom (D) into slots in Legs (B) and attach bottom (D) to Posts (B) by using 2 M6 x 20 Hex Bolts (F).
Attach two Posts (B) into Top Unit (A) using 2 M6 x 35 Hex Bolts (E) and bottom (D) using 2 M6 x 20 Hex Bolts (E).
CARE
Clean with mild soap and wipe dry.
For best service, to order replacement parts go to www.alaterrefurniture.com. Use the
order form on the web site to order your replacement parts. Thank You!
REPLACEMENT PARTS:
A
B
E
F