Bolton Furniture AWTR2927 User manual

ASSEMBLY INSTRUCTIONS
Coat Hook With Shelf
REPLACEMENT PARTS
Please do not contact the company purchased from as we can help you faster.
Order replacement parts and hardware at"boltonfurniture.com"
www.boltonfurniture.com
Tool Included
. Use of power tool to assemble
this product will invalidate any
claim and damage this product
making it unsafe!!!
. Please assemble on a clean soft
surface to avoid damage. 20 minutes
. Use of power tool to assemble
this product will invalidate any
claim and damage this product
making it unsafe!!!
. Please assemble on a clean soft
surface to avoid damage. 20 minutes
. Use of power tool to assemble
this product will invalidate any
claim and damage this product
making it unsafe!!!
. Please assemble on a clean soft
surface to avoid damage. 50 minutes
!
12
11
10
9
8
7
6
5
4
3
2
1
!
12
11
10
9
8
7
6
5
4
3
2
1
!
12
11
10
9
8
7
6
5
4
3
2
1
(Not included)
2021/10/22 Page 1of 3 AWTR2927 Coat Hook With Shelf

Part List-Coat Hook With Shelf
A
Identifying the hardware-Identify the hardware using the illustrations below.
www.boltonfurniture.com
B02 C02
2021/10/22 Page 2of 3 AWTR2927 Coat Hook With Shelf

Step 1
Measure the distance between the two holes of the key hole center.
Mark the desired location on the wall there you want to hang the Coat Hook With Shelf.
Step 2
Drill 1/8"pilot hole 2" deep. This marks location for screws to hang the Coat Hook With Shelf.
Step 3
Note: Do not drive screws all the way in, have head of screws out about 3/8".
Step 4
If hole locations do not align with the stud, install the plastic anchors(C).
Tap the plastic anchors(C) into the drywall completely.
If hole location is aligned with stud in the wall, secure the screws(B）
directly into the stud.
3
8"
B
C
Step 5
Secure screws(B) into plastic anchors.
Note: Do not drive screws all the way in, have head of screws out about 3/8".
Step 6
Hang the Coat Hook.
C
3
8"
C
B
B
B
2021/10/22 Page 3of 3 AWTR2927 Coat Hook With Shelf