Bolton Furniture Mission User manual

4/12/17 1 of 2 Mission Chairside End Table
Mission Chairside End Table
Thank you for purchasing our Mission Chairside End Table. We have found it helpful to have a
second person present in at least one step of the assembly.
Mission Chairside End Table Assembly Instructions
Lay out all parts on a "non-abrasive"surface to avoid scratching furniture.
PARTS
A
B
C
1
1
1
TOP
C
B
A
QTY.DRAWING DESCRIPTIONNO.
SHELF
POST
E1
HEX WRENCH
12
M6*35mm
BOLT
F
D
QTY.DRAWING DESCRIPTIONNO.
1
2
G

4/12/17 2 of 2 Mission Chairside End Table
Step 1
Read through these instructions thoroughly before beginning assembly. We have found this to be of great
value when first assembling this product.
Step 2
Remove all parts and hardware from packing material. Wooden pieces should be placed on a non
abrasive surface (like the carton or carpet) to prevent damage to the finish.
Step 3,4 and 5
Remove drawer from Top Unit (A). Lay Top Unit upside down and attach 2 Posts (B) by using 2 M6 x 35mm Bolts (D).
Note: It will help to have a second person at this time to assist in assembly.
Put shelf (C) into slots in Legs (B) and attach to Legs (B) using 2 M6 x 35 Hex Bolts (D).
Attach remaining 2 Posts (B) to Top Unit (A) and Shelf (C) using 4 M6 x 35 Hex Bolts (D).
Step 6
Place End Table right-side up.
Attach Handle (F) using 2 Handle Screws (G).
CARE
Clean with mild soap and wipe dry.
For best service, to order replacement parts go to www.alaterrefurniture.com. Use the
order form on the web site to order your replacement parts. Thank You!
REPLACEMENT PARTS:
DB
C
F