BOMANN WA 5727 TL User manual

H
HH
H OUSEHOLD
OUSEHOLD OUSEHOLD
OUSEHOLD W
WW
W ASHING
ASHING ASHING
ASHING M
MM
M ACHINE
ACHINEACHINE
ACHINE WA
WAWA
WA 572
572572
5727
77
7 TL
TLTL
TL
Instruction Manual
Instruction ManualInstruction Manual
Instruction Manual

2
Contents
ContentsContents
Contents
Introduction ……………………..………………….………………………………………………….….... Page 3
General Notes …...……………………………………….……………………………………………..…. Page 3
Special safety Information for this Unit ……………………………...…………………………….......... Page 4
Transport and Unpacking the Appliance ….………………..…………………………………………… Page 5
Appliance Equipment ……………………..….………………………………………………………….... Page 5
Installation …...…………………………………………………………………………………………..…. Page 6
Startup / Operation ……………………..………………………………………..………………….......... Page 8
Cleaning and Maintenance …...……………………….…..………………………………………………
Page 12
Troubleshooting ……………………..………………......……………………………………………….... Page 13
Technical Data …...………………………………………...………..…………………...……………..…. Page 14
Disposal …...………………………………..………………..……………………………..……………… Page 14
EU Product Data Sheet .....………………………..………..……………………………..……………… Page 15

3
Introduction
IntroductionIntroduction
Introduction
Thank you for choosing our product. We hope you
will enjoy using the appliance.
Symbols in these Instructions for Use
Symbols in these Instructions for UseSymbols in these Instructions for Use
Symbols in these Instructions for Use
Important information for your safety is specially
marked. It is essential to comply with these instruc-
tions to avoid accidents and prevent damage:
WARNING:
WARNING:WARNING:
WARNING:
This warns you of dangers to your health and indi-
cates possible injury risks.
CAUTION:
CAUTION:CAUTION:
CAUTION:
This refers to possible hazards to the machine or
other objects.
NOTE
NOTENOTE
NOTE:
::
: This highlights tips and information.
General Notes
General NotesGeneral Notes
General Notes
Read the operating instructions carefully before put-
ting the appliance into operation and keep the in-
structions including the warranty and the receipt. If
you give this device to other people, also pass on the
operating instructions.
NOTE
NOTENOTE
NOTE:
::
:
Illustrations can deviate from the original appliance.
•The appliance is designed exclusively for private
use and for the envisaged purpose. This appli-
ance is not fit for commercial use.
•The appliance is only to be used as described in
the user manual. Do not use the appliance for any
other purpose. Any other use is not intended and
can result in damages or personal injuries.
•Do not use it outdoors. Keep it away from sources
of heat, direct sunlight and humidity.
•Do not operate the appliance without
withoutwithout
without supervision.
•When not in use, for cleaning, user maintenance
works or with disruption, switch off the appliance
and disconnect the plug (pull the plug itself, not
the lead) or turn off the fuse.
•The appliance and if possible the mains lead have
to be checked regularly for signs of damage. If
damage is found the appliance must not be used.
•For safety reasons, alterations or modifications of
the appliance are prohibited.
•In order to ensure your children’s safety, please
keep all packaging (plastic bags, boxes, polysty-
rene etc.) out of their reach.
WAR
WARWAR
WARNING
NINGNING
NING:
::
:
Do not allow small children to play with the foil.
There is a danger of suffocation!
danger of suffocation!danger of suffocation!
danger of suffocation!

4
Special safety Information for this Unit
Special safety Information for this UnitSpecial safety Information for this Unit
Special safety Information for this Unit
WARNING: Hot surface! Danger of burns!
WARNING: Hot surface! Danger of burns!WARNING: Hot surface! Danger of burns!
WARNING: Hot surface! Danger of burns!
During operation the temperature of the unit drum may be very hot.
•Before using the transportation locking screws must be removed, oth-
erwise it may cause serious damages.
•The dry weight of laundry must not exceed the max. loading of 7 kg
capacity.
•The unit must be connected with a new set of hoses to the water sup-
ply; old hose sets should not be reused.
•The maximum / lowest permitted water inlet pressure is 1.0 / 0.05 MPa.
•Do not use any flammable/explosive cleaning agents such as benzene
in the appliance.
•In the appliance bottom are located ventilation openings (depending on
model). These may not be blocked e.g. by carpet. Pay attention to free
circulation of air.
•If the unit is used in the bathroom, unplug the power cord after using as
the proximity of water presents a danger. This even applies when the
unit is switched off.
•This appliance can be used by children
children children
children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the
use of theuse of the
use of the a
aa
appliance
pplianceppliance
ppliance in a safe way and under-
stand the hazards involved.
•Children
ChildrenChildren
Children shall not play with the appliance.
•Children
ChildrenChildren
Children younger than 3 years should be kept away, unless they are
constantly supervised.

5
•Cleaning and user maintenance
user maintenanceuser maintenance
user maintenance shall not be made by children
childrenchildren
children unless
they are older 8 years and supervised.
•The appliance must be cleaned regularly. Follow the instructions in the
chapter "Cleaning and Maintenance".
• Do not try to repair the appliance on your own. Always contact an au-
thorized technician. To avoid the exposure to danger, always have
faulty cable be replaced only by the manufacturer, by our customer
service or by qualified person and with a cable of the same type. Do
not use the device if the device or plug is damaged.
Transport and
Transport and Transport and
Transport and Unpacking the Applian
Unpacking the ApplianUnpacking the Applian
Unpacking the Appliance
cece
ce
Transport the appliance
Transport the applianceTransport the appliance
Transport the appliance
The appliance has wheels which facilitate the
transport and installation of the appliance.
To do this, move the transport lever
below the unit base to the left.
Return the lever to its original
position after determining the final
location for the device.
Unpacking the appliance
Unpacking the applianceUnpacking the appliance
Unpacking the appliance
•Remove the appliance from its packaging.
•Remove all packaging material, such as foils, filler
and cardboard packaging.
•To prevent hazards, check the appliance for any
transport damage.
•In case of damage, do not put the appliance into
operation. Contact your distributor.
CAUTION: Transport protection!
CAUTION: Transport protection!CAUTION: Transport protection!
CAUTION: Transport protection!
Remove the transport protection
strips E
E E
E and F
F F
F (fixing the drum).
For this tilt the appliance carefully
forwards.
NOTE
NOTENOTE
NOTE:
::
:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance Equipment
Appliance EquipmentAppliance Equipment
Appliance Equipment
Appliance Overview
Appliance OverviewAppliance Overview
Appliance Overview
A
AA
A Appliance lid D
DD
D Control panel
B
BB
B Drum E
EE
E Filter cover
C
CC
C Detergent container F
FF
F Feet

6
Delivery scope
Delivery scopeDelivery scope
Delivery scope
1x Inlet hose, 1x bottom plate incl. 3x fixing clips,
2x transport locking covers, 1x hose retaining sheet
Installation
InstallationInstallation
Installation
WARNING:
WARNING:WARNING:
WARNING:
The unit must not be connected to the mains during
installing. Otherwise there is da
dada
dan
nn
nger to life
ger to lifeger to life
ger to life or electri
electrielectri
electric
c c
c
shock hazard
shock hazardshock hazard
shock hazard!
CAUTION:
CAUTION:CAUTION:
CAUTION:
For a correct operation the appliance must be con-
nected properly. The specifications for water supply
and drain as well as the electrical connection must
fulfill the required criteria.
Install the bottom plate
Install the bottom plateInstall the bottom plate
Install the bottom plate
The bottom plate is included in the scope of delivery
between the appliance rear and the packaging.
Align the plate in its
intended position
underneath the device and
fix it with the enclosed
clips.
Remove the transport locking screws
Remove the transport locking screwsRemove the transport locking screws
Remove the transport locking screws
CAUTION:
CAUTION:CAUTION:
CAUTION:
•Before using, all transport locking screws must be
removed from the appliance back. Otherwise it
may cause serious damages.
•Keep the transport locking screws for later use /
transport. Never transport the appliance without
properly attached transportation safety!
Remove the transport lock-
ing screws with a wrench.
Insert the supplied
transport locking covers.
Installation location
Installation locationInstallation location
Installation location
•The site should be located near the water inlet
and outlet, as well as near a properly grounded
power socket.
•Good ventilation around the appliance is required,
in order to dissipate the heat properly. Sufficient
clearance must be created for this purpose.
•The clearance to the top must be created so, that
the unit lid can open without being impeded.
•Make sure that the floor on which the appliance is
installed, is even, heat-resistant and clean.
•Take care of a solid and horizontal position of the
appliance. If the appliance is not horizontally lev-
eled, adjust the feet accordingly (see “Adjust the
feet”).
•Power cord and water hoses may not kinked or
squashed.
•The wall socket must be freely accessible.
•Avoid the installation:
Avoid the installation:Avoid the installation:
Avoid the installation:
-near heaters, next to a stove, direct sunlight
or any other heat sources;
-at locations with high humidity (e.g. out-
doors), as metal parts would be susceptible
to corrosion under such circumstances;
-in rooms where the temperature could drop
below freezing. Do not expose the appliance
any weather.
-near volatile or flammable materials (e.g.
gas, fuel, alcohol, paint, etc.).
Adjusting the feet
Adjusting the feetAdjusting the feet
Adjusting the feet
CAUTION:
CAUTION:CAUTION:
CAUTION:
The feet must never be removed. Do not restrict the
floor clearance through carpets, strips of wood or
similar. Danger of heat accumulation!
Danger of heat accumulation!Danger of heat accumulation!
Danger of heat accumulation!
Use the wrench to loosen the
lock nuts. Rotate the feet to
change the height.

7
Tighten the lock nuts with the wrench, if the unit is
aligned. The feet must have solid ground contact.
Check with a spirit level whether the appliance is
leveled horizontally. If the unit is not in balance, the
feet must be adjusted again.
Water connection
Water connectionWater connection
Water connection
CAUTION:
CAUTION:CAUTION:
CAUTION:
•The Installation of the water supply must conform
to the local laws and regulations.
•The appliance is not
notnot
not suitable for hot water supply.
•Use the new supplied hose set to connect the
appliance to the water supply. Do not reuse old or
used connection sets.
•If the water pipe is new or long time not used,
ensure before connecting to the water system,
that the water is clear and free from contamina-
tion.
Notes on inlet hose safety system (delivery scope
Notes on inlet hose safety system (delivery scope Notes on inlet hose safety system (delivery scope
Notes on inlet hose safety system (delivery scope
depending on model)
depending on model)depending on model)
depending on model)
The safety system consists of a double-walled inlet
hose. It guarantees to cut off the water supply when
leakage of the inner hose. Switching off the water
supply leads over an electronic contact.
If necessary, you can order an inlet hose safety sys-
tem from your dealer or in our online accessories
shop, www.bomann-germarny.de. To order, use the
reference number found under “Technical Data”.
Connect the water inlet hose (cold water connection)
Connect the water inlet hose (cold water connection)Connect the water inlet hose (cold water connection)
Connect the water inlet hose (cold water connection)
NOTE
NOTENOTE
NOTE:
::
:
The water pressure must be between 0.05-1.0 MPa.
With higher pressure: use a pressure regulator.
•Connect the water inlet hose to a
water thread with ¾“. Screw the
hose firmly in the direction of the
screw thread; pay attention for a
tight fit.
•Connect the other end of the inlet
hose to the inlet valve on the ap-
pliance back; pay attention for a
tight fit too
Connect the water drain hose
Connect the water drain hoseConnect the water drain hose
Connect the water drain hose
NOTE
NOTENOTE
NOTE:
::
:
The drain hose has a length of approx. 1.5 m and
can extend with a suitable hose and connecting
piece to a length of max. 4 m.
CAUTION:
CAUTION:CAUTION:
CAUTION:
In order to prevent backflow of contaminated water,
the free end of the hose must not come under the
water level of the drain.
•Connect the drain hose to a drain pipe with a
minimum diameter of 40 mm; alternatively the
drain hose can be fixed to a sink or directly to the
drainage.
•Always make sure that the hose is not bent or
squeezed. For this purpose use the supplied hose
retaining sheet.
•The hose must be installed at a height of min.
60 cm and max. 90 cm above the floor.
•Secure the hose securely in order to avoid a
change in position and with it a water leakage.
Electrical connection
Electrical connectionElectrical connection
Electrical connection
WARNING:
WARNING:WARNING:
WARNING:
•The installation to the mains supply must conform
to the local standards and regulations.
•Improper connection may cause to an electric
electric electric
electric
shock
shockshock
shock!
•Do not use multiple sockets or extension cords.
•It is not allowed to modify the plug provided with
the appliance! If the plug does not fit properly to

8
the outlet, let install a proper outlet by an author-
ized specialist.
•The accessibility of the power plug must always
be ensured in order to disconnect the device from
the power supply in case of an emergency.
•Make sure that the voltage supply matches the
specifications on the rating label (appliance back)
before connecting.
•Connect the mains cable to a properly installed
and earthed wall outlet.
•If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Prior using for the first time
Prior using for the first timePrior using for the first time
Prior using for the first time
•Make sure that all transport securing devices has
been removed.
•Remove the accessories and any material from
the drum.
•Allow the appliance to wash the first time without
any laundry, with the addition of some washing
agent in the program [Cotton 90°C] (see "Starting
the program").
Preparation of clothes
Preparation of clothesPreparation of clothes
Preparation of clothes
CAUTION
CAUTIONCAUTION
CAUTION
•Do not wash any items that are declared as non-
washable. Follow always the instructions on the
care label of your laundry.
•Do not wash clothes soaked in petrol, thinners,
alcohol or solvents.
•Foreign objects (e.g. nails, coins) can cause
damage to garments and components.
•Check the pockets of all garments on content and
empty them completely.
•Sort your fabrics by color and the symbols con-
tained on the care label. Separate white and col-
ored laundry. All new colored clothes should be
washed separately.
•Turn buttons and embroidery inside.
•Close zippers, buttons and hooks before washing.
Tie any loose straps and loops.
•Wash bras e.g. in a pillowcase to prevent leakage
of the steel bracket.
•Particularly delicate fabrics such as curtains, cro-
chet or small items (socks, handkerchiefs, neck-
ties, etc.) should be washed in a closed bag.
•Remove always all the hooks from curtains.
•Washing large and heavy parts such as bath tow-
els, jeans, lined jackets and the like can cause the
drum to run unbalanced. We recommend adding
one or two smaller parts; this especially helps with
the spinning cycle.
•The clothes which easily get fuzzed shall be
washed separately; otherwise the other articles
can be stained with dust and thrum etc. Prefera-
bly, black clothes and cotton clothes shall be
washed separately because they can easily get
stained with the thrums of other colors when be-
ing washed together.
•Clean away dusts, stains and pet hairs from the
clothes.
•For spot removing heavy soiling the laundry can
be treated with a special prewash spray. Follow
the operating instructions of the product packag-
ing.
Select proper detergent
Select proper detergentSelect proper detergent
Select proper detergent
CAUTION:
CAUTION:CAUTION:
CAUTION:
Always consider the dosage and storage recommen-
dations on the sales packaging.
WARNING:
WARNING:WARNING:
WARNING:
Keep detergent and additives out of reach for chil-
dren!
•Use only “slightly foaming” detergent for washing
machines according to type of fabric (cotton, syn-

9
thetics, lined or woolen products), color, washing
temperature and degree of soiling. Otherwise
foaming can cause overflowing.
•Bleach is alkaline and can damage your clothing,
preferably does not use bleach.
•Detergents often leave residue in the clothes,
which can cause bad odor if not rinsed properly.
•Detergent cannot easily get dissolved completely
if there is too much detergent or water tempera-
ture is rather low. It can remain in clothes, pipes
and washing machines to pollute the clothes.
•Washing shall follow the weight of clothes, dirty
degrees, local water hardness as well as the rec-
ommendations from the detergent manufacturers.
Consult the water company if you are not clear of
water hardness.
Dete
DeteDete
Detergent container
rgent containerrgent container
rgent container
CAUTION:
CAUTION:CAUTION:
CAUTION:
The dispenser is designed exclusively for the use of
detergents for washing machines!
NOTE
NOTENOTE
NOTE:
::
:
•Always add the detergent powder just before
starting the wash cycle, otherwise it could get
damp and will not dissolve properly.
•At the end of the wash cycle the container must
be empty.
IChamber for pre-wash detergent.
II
Chamber for main wash deter-
gent.
Chamber for detergent additive
(softener).
Do not exceed the MAX marks!
Foam detection
Foam detectionFoam detection
Foam detection
Excessive foam forms when too much detergent is
used. This affects the wash and rinse cycle. The
function automatically checks foaming; excessive
foam is removed by an extra rinse and spin cycle.
Fill in the laundry
Fill in the laundryFill in the laundry
Fill in the laundry
•Unravel the clothes before putting them into the
machine.
•Each load should correspond to the nominal ca-
pacity of the appliance. Do not overload the appli-
ance. Different strengths, sizes and types of laun-
dry can affect the actual loading capacity. It is ad-
visable to load the appliance just that a normal
circulation during washing is possible.
•Make sure that no laundries are caught between
the drum covers.
Closing the drum
Closing the drumClosing the drum
Closing the drum
CAUTION:
CAUTION:CAUTION:
CAUTION:
Always carefully open and close the drum to avoid
possible damage to the laundry and the appliance.
•Open the drum by holding both
parts of the drum cover with one
hand and pressing the button to
open with the other hand.
•After loading the laundry, close
the front cover and then the rear
cover. You hear a click sound.
Control panel
Control panelControl panel
Control panel
1
1 1
1 Program selector switch
Program selector switchProgram selector switch
Program selector switch
To select a wash program, turn the program selector
switch to the appropriate position. For details about
the programs, see the "Program table".

10
AUS
AUSAUS
AUS (Off)
To switch the unit off, turn the program selector back
to the AUS (Off) position.
2
2 2
2 Wash
WashWash
Wash temperature
temperaturetemperature
temperature
By repeatedly pressing the button, you select the
required wash temperature.
If the control lamps do not indicate a selection, the
wash temperature remains cold.
3
3 3
3 Speed
SpeedSpeed
Speed
By repeatedly pressing the button, you select the
speed for the spin cycle.
There is no spin in the spin stop setting , the
water is pumped out only.
4
4 4
4 Delay
DelayDelay
Delay
By repeatedly pressing the button, the program start
can be changed about 1 – 2 – 4 or 8 hours. Press the
Start/Pause button and the unit will start automatical-
ly after the selected time has elapsed
5
5 5
5 Extra
ExtraExtra
Extra Rinse
RinseRinse
Rinse
Use the button to select the option “Extra Rinse”.
6
6 6
6 Pre
PrePre
Pre-
--
-Wash
WashWash
Wash
Use the button to select the option “Pre-Wash”.
7
7 7
7 Start/Pause
Start/PauseStart/Pause
Start/Pause
Keep the button pressed for a few seconds to start /
stop the selected or running wash program.
8 Progra
8 Progra8 Progra
8 Program
m m
m status
status status
status in
inin
indicator
dicatordicator
dicator
Pre
PrePre
Pre-
--
-Wash
WashWash
Wash￫
￫￫
￫Wash
WashWash
Wash￫
￫￫
￫Rinse
RinseRinse
Rinse￫
￫￫
￫Spin
SpinSpin
Spin￫
￫￫
￫End
EndEnd
End
Depending on the program selector switch position,
the start cycle of the respective program lights up.
After the program has started, the control lamps
indicate the further program sequence and the end of
the program.
P
PP
Program ta
rogram tarogram ta
rogram table
bleble
ble
NOTE
NOTENOTE
NOTE:
::
:
The shown values are approximate and recommendations under standard conditions and therefore not bind-
ing. The consumption data can vary depending on water pressure, water hardness, water inlet temperature,
ambient temperature, type and quantity, as well as power supply and selected additional options from the
specified values.
Pr
PrPr
Pro
oo
ogram
gramgram
gram Program
Program Program
Program I
II
Information
nformationnformation
nformation max.
max.max.
max.
°C
°C°C
°C
max.
max.max.
max.
kg
kgkg
kg
max.
max.max.
max.
rpm
rpmrpm
rpm
max.
max.max.
max.
m
mm
min
inin
in
Baumwolle
1)2)
(Cotton) Recommended for durable, heat-resistant cotton textiles. 90 7.0 1200 180
Cotton
Standard*
Suitable for your daily laundry. Washing time is correspondingly
long and intense. Recommended for cotton articles such as e.g.
bed linen, duvet covers, gowns, underwear etc.
60 7.0 1200 200
40 7.0 1200 190
Pflegeleicht
1)
(Synthetics) Suitable for fine textiles, e.g. silk, satin, synthetic or blended fabric. 60 3.5 800 120
Jeans
1)
Suitable for jeans, colored and dark cotton fibers. 40 3.5 800 125
Oberhemden
(Shirts)
Suitable for shirts made of cotton and polyester. The washing time
is shortened and creasing is reduced. 40 1.5 500 55
Sport
1)2)
Especially gentle for slightly soiled sportswear made of cotton,
microfibres and synthetics. 40 3.5 800 110
Buntwäsche
1)2)
(Coloured) Suitable for slightly soiled, different colored cotton textiles. 30 7.0 1200 120

11
Pr
PrPr
Pro
oo
ogram
gramgram
gram Program Information
Program InformationProgram Information
Program Information max.
max.max.
max.
°C
°C°C
°C
max.
max.max.
max.
kg
kgkg
kg
max.
max.max.
max.
rpm
rpmrpm
rpm
max.
max.max.
max.
min
minmin
min
Antibakteriell
1)2)
(Antibacterial)
Suitable for e.g. baby clothes or people with allergies.
An additional rinse frees the laundry of detergent residues. 40 7.0 1200 240
Handwäsche
(Hand wash)
Suitable for delicate textiles characterized as "hand wash"
e.g. lingerie, lace underwear. 20 1.5 500 50
Kurzwäsche
(Quick)
Suitable for a small amount of textiles with light soiling without
noticeable stains. 30 3.5 800 20
Wolle
(Wool)
Suitable for "machine washable" wool. Observe the correct
washing temperature and use suitable detergent. 40 1.5 800 50
Mix
1)2)
Suitable for blended fabric textiles, means cotton mixed with
synthetic fibers. 20 3.5 800 100
Feinwäsche
(Delicates)
Gentle wash, also suitable for machine washable silk. Use
appropriate detergent. 30 1.5 500 55
Spülen
1)
(Rinse)
Separate rinse. For rinsing hand washed fabrics e.g. silk,
cashmere, lingerie. --- 7.0 1200 60
Schleudern
(Spin) Separate spin. The water is pumped out before the spin cycle. --- 7.0 1200 25
Note that the
Note that the Note that the
Note that the additional
additional additional
additional functions are program
functions are programfunctions are program
functions are program-
--
-dependent!
dependent!dependent!
dependent!
1)
Extra Rinse Additional rinse cycle to the previously set main wash program, detergent residues are rinsed out.
2)
Pre-Wash Additional wash cycle to the previously set main wash program, for particularly dirty laundry.
*
**
*Standard program
Standard programStandard program
Standard program:
: :
: Cotton
Cotton Cotton
Cotton Standard
Standard Standard
Standard /
With full and partial load, these are the standard wash programs to identify the information on the energy la-
bel. These programs are suitable to clean normally soiled laundry and of combined energy and water con-
sumption most efficiently.
Wash temperature
Wash temperatureWash temperature
Wash temperature
Select the temperature corresponding to the textiles
and pollution. Basically: the higher the temperature,
the higher the power consumption.
Temperature
TemperatureTemperature
Temperature Explanation
ExplanationExplanation
Explanation
90°C Heavily soiled pure white cotton or linen (e.g.
tablecloths, sheets and towels).
60°C Moderately soiled colored cotton, linen and
synthetic (e.g. shirts or underwear). Slightly
soiled whites (e.g. underwear).
40°C-30°C-
cold
Normally soiled laundry (including synthetic
and wool).
Capacity
CapacityCapacity
Capacity
Do not overload the appliance otherwise the laundry
is not getting clean. Refer to the information in the
"Pprogram table".
Starting the
Starting the Starting the
Starting the program
programprogram
program
•Connect the appliance to the power supply and
switch it on.
•The water supply must be opened up to the max-
imum pressure.
•Load your laundry and fill in the detergent, if nec-
essary.
•Close the drum covers and the unit lid properly.
•Set the required washing conditions.
•Start the operation.
Appliance
ApplianceAppliance
Appliance l
ll
lid
idid
id lock
locklock
lock
Once a wash program has been started, the appli-
ance lid cannot be opened.
When the wash cycle is finished, the lid lock will au-
tomatically be unlocked.

12
Changing the program
Changing the programChanging the program
Changing the program
•To make a program change, first interrupt the
washing process with the Start/Pause button.
•Set the program selector switch to the AUS(Off)-
position.
•Select the desired program and start the new
operation.
End of program
End of programEnd of program
End of program
At the end of the wash cycle several beeps are
sounded; a few minutes later, the unit goes into
standby mode. The unit lid lock will be unlocked.
Switching off
Switching offSwitching off
Switching off
•Switch off the appliance.
•Close the water supply!
•Leave the appliance lid slightly open until the next
wash cycle to avoid odors.
•If the appliance is not in use for an extended peri-
od, disconnect the mains plug or switch off or turn
out the fuse.
Energy saving tips
Energy saving tipsEnergy saving tips
Energy saving tips
•If possible avoid the selection of high wash tem-
peratures. Modern detergents achieve good
washing results even at low temperatures.
•Select the wash program depending on the type
of laundry and the required degree of washing.
•Take advantage of the maximum capacity of each
wash program.
•Clean the filter regularly to avoid excessive wash-
ing and high energy consumption.
•Ventilate the room well. The room temperature
should not rise above +35°C.
Cleaning and
Cleaning and Cleaning and
Cleaning and Maintenance
MaintenanceMaintenance
Maintenance
WAR
WARWAR
WARNING
NINGNING
NING:
::
:
•Always switch off the appliance and disconnect it
from the power supply before cleaning and user
maintenance.
•Allow the appliance to cool down sufficient before
cleaning. Scalding!
Scalding!Scalding!
Scalding!
•Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock!
Risk of electric shock!Risk of electric shock!
Risk of electric shock! Hot steam could damage
the plastic parts. The appliance must be dry be-
fore restarting operation.
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
•Do not use a wire brush or other sharp, abrasive
items.
•Do not use any acidic or abrasive detergents.
NOTE
NOTENOTE
NOTE:
::
:
Dirty or clogged filter degrades the washing result.
Regularly check the filter and clean them if neces-
sary.
Maintenance of the washing machine
Maintenance of the washing machineMaintenance of the washing machine
Maintenance of the washing machine
•Clean the appliance outer surfaces and the lid
sealing thoroughly with a soft, damp cloth. Use
only mild cleaning agent.
•Use a dampened cloth with a little white vinegar
or a special detergent for washing machines to
clean the appliance drum.
•Recommendation: allow the appliance to run
regularly without loading in the program [Cotton
90°C].
•Dry the outer surfaces thoroughly before taking in
operation again.
Cleaning the detergent container
Cleaning the detergent containerCleaning the detergent container
Cleaning the detergent container
•Press the release button above
the detergent container and
remove it at the same time.

13
•Wash the chambers thoroughly under running
water. If necessary, use a soft brush.
•Reassemble the detergent container properly.
Cleaning the inlet filter
Cleaning the inlet filter Cleaning the inlet filter
Cleaning the inlet filter
CAUTION:
CAUTION:CAUTION:
CAUTION:
•Close the water supply before cleaning!
•Always check if the water hoses are properly rein-
stalled and no water leaks.
Inlet fi
Inlet fiInlet fi
Inlet filter at the tap
lter at the taplter at the tap
lter at the tap
Clean the filter when not sufficient water is supplied
with opened water valve.
•Unscrew the inlet hose from the
water valve.
•Wash the inlet filter under running water. Recon-
nect the inlet hose firmly.
Inlet filter at the appliance
Inlet filter at the applianceInlet filter at the appliance
Inlet filter at the appliance
Clean the filter regularly, about every one to three
months.
•Unscrew the inlet hose from the
appliance back.
•Clean the filter with a small brush.
•Reconnect the inlet hose firmly.
Cleaning the filter of drain pump
Cleaning the filter of drain pumpCleaning the filter of drain pump
Cleaning the filter of drain pump
CAUTION:
CAUTION:CAUTION:
CAUTION:
The appliance must never be used without the filter.
The foreign body trap in the drain pump prevents the
flushed parts from closing off the pumping system.
Clean the pump regularly, approx. once a month;
depending on use.
•Open the cover in the base of
the unit. Caution!
Caution!Caution!
Caution! For this, the
use of a tool could be necessary.
•Place a drip tray under to catch possible leaking
water.
•Turn the cap counterclockwise. Look for leaking
water! Turn the filter not completely out!
Turn the filter not completely out!Turn the filter not completely out!
Turn the filter not completely out!
•Interrupt the water flow by turning the filter clock-
wise again.
•If the draining process is completed, turn out the
filter completely.
•Take off the filter and remove any dirt and foreign
objects.
•Insert the cap again and make sure it is tightened
well and no water can escape.
•Close the drain pump cover.
Troubleshooting
TroubleshootingTroubleshooting
Troubleshooting
Bef
BefBef
Before you contact an
ore you contact an ore you contact an
ore you contact an authorized specialist
authorized specialistauthorized specialist
authorized specialist
Trouble
TroubleTrouble
Trouble Possible cause / measure
Possible cause / measurePossible cause / measure
Possible cause / measure
Appliance does
not work
∙ Check the power supply. ∙ Is the
appliance switched on? ∙Is a program
selected? ∙ Consider the maximum
loading.
No water supply ∙ Tap is not open, water supply not
free or water pressure too low.
∙ Inlet filter blocked. ∙ Inlet hose is
blocked, kinked, squeezed.
Water is not
pumped out
∙ Drain hose is blocked, kinked,
squeezed, not correctly connected
∙ Drain pump is blocked.
Strong vibration ∙ Have the transport bolts been re-
moved? ∙ The appliance must stand
on a firm surface. ∙ Are the feet
aligned?
NOTE
NOTENOTE
NOTE:
::
:
If a problem still persists after following the steps
above, contact your distributor or an authorized tech-
nician.

14
Technical Data
Technical DataTechnical Data
Technical Data
Electrical conne
Electrical conneElectrical conne
Electrical connec
cc
ction
tiontion
tion………………..
………………..………………..
………………...
..
.…………………..
…………………..…………………..
…………………..
Connection voltage: …………......….220-240 V~ / 50 Hz
Connection power: …………..…………….……...2100 W
Dimension H x W x D / Weight…..…...………………..
Dimension H x W x D / Weight…..…...………………..Dimension H x W x D / Weight…..…...………………..
Dimension H x W x D / Weight…..…...………………..
Unit size: ………….....….……….…90.0 x 40.0 x 60.0 cm
Net weight: …………………………..……approx. 61.5 kg
Accessories available
Accessories availableAccessories available
Accessories available…………………………………..
…………………………………..…………………………………..
…………………………………..
Inlet hose safety system…………...Art.-No. 8900 400
The right to make technical and design modifications
in the course of continuous product development
remains reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
Disposal
DisposalDisposal
Disposal
Meaning of the “Dustbin” Symbol
Meaning of the “Dustbin” SymbolMeaning of the “Dustbin” Symbol
Meaning of the “Dustbin” Symbol
Protect our environment; do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will
no longer use to the collection points provided for
their disposal.
This helps avoid the potential effects of incorrect
disposal on the environment and human health.
This will contribute to the recycling and other forms of
reutilization of electrical and electronic equipment.
Information concerning where these can be disposed
of can be obtained from your local authority.
WARNING:
WARNING:WARNING:
WARNING:
Remove or disable any existing snap and bolt locks,
if you take the unit out of operation or dispose it.

15
EU Product Data Sheet
EU Product Data SheetEU Product Data Sheet
EU Product Data Sheet
Data sheet for household washing machines according regulation (EU) No. 1061/2010
Data sheet for household washing machines according regulation (EU) No. 1061/2010Data sheet for household washing machines according regulation (EU) No. 1061/2010
Data sheet for household washing machines according regulation (EU) No. 1061/2010
Brand
BrandBrand
Brand
Bomann
BomannBomann
Bomann
Model
ModelModel
Model
WA 57
WA 57WA 57
WA 572
22
27
77
7 TL
TLTL
TL
Rated capacity
Rated capacityRated capacity
Rated capacity kg
kgkg
kg
7
77
7.0
.0.0
.0
Energy efficiency class
Energy efficiency classEnergy efficiency class
Energy efficiency class
1)
1)1)
1)
A+
A+A+
A+++
++++
++
Annual energy consumption
Annual energy consumptionAnnual energy consumption
Annual energy consumption
2)
2)2)
2)
kWh
158
158158
158
Energy consumption of standard program
Energy consumption of standard programEnergy consumption of standard program
Energy consumption of standard program
- Cotton 60°C at full load kWh
0.72
- Cotton 60°C at partial load kWh
0.79
- Cotton 40°C at partial load kWh
0.57
Weighted power consumption: off mode W
0.46
Weighted power consumption: left-on mode W
0.46
Annual water consumption
Annual water consumptionAnnual water consumption
Annual water consumption
3)
3)3)
3)
l
ll
l
10340
1034010340
10340
Spin
SpinSpin
Spin-
--
-drying efficiency class
drying efficiency classdrying efficiency class
drying efficiency class
4)
4)4)
4)
C
CC
C
Maximum spin speed rpm
1200
Remaining moisture
- Cotton 60°C at full load %
51
- Cotton 60°C at partial load %
56
- Cotton 40°C at partial load %
56
Standard program
Standard programStandard program
Standard program
5)
5)5)
5)
C
CC
Cotton 60°C / 40°C
otton 60°C / 40°Cotton 60°C / 40°C
otton 60°C / 40°C
Program time of standard program
- Cotton 60°C at full load Min.
205
- Cotton 60°C at partial load Min.
207
- Cotton 40°C at partial load Min.
199
Duration of the left-on mode Min.
-
Airborne acoustical noise: washing dB(A) re1pW
60
Airborne acoustical noise: spinning dB(A) re1pW
78
Built-in appliance
-
1)A+++ (höchste Effizienz) bis D (geringste Effizienz).
2)Auf der Grundlage von 220 Standard-Waschzyklen für 60°C- und 40°C-Baumwollprogramme bei vollständiger und Teil- Beladung. Der tatsächli-
che Energieverbrauch hängt von der Art der Nutzung des Gerätes ab, sowie dem Verbrauch der Betriebsarten mit geringer Leistungsaufnahme.
3)Auf der Grundlage von 220 Standard-Waschzyklen für 60°C- und 40°C-Baumwollprogramme bei vollständiger und Teil- Beladung. Der tatsächli-
che Wasserverbrauch hängt von der Art der Nutzung des Gerätes ab.
4)Auf einer Skala von G (geringste Effizienz) bis A (höchste Effizienz).
5)Baumwolle 60°C / 40°C. Bei vollständiger und Teil- Beladung sind diese Standard-Waschprogramme zur Ermittlung der Angaben auf dem
Energielabel. Diese Programme sind zur Reinigung normal verschmutzter Wäsche geeignet und auf den kombinierten Energie- und Wasserver-
brauch am effizientesten.

16
C. Bomann GmbH
C. Bomann GmbHC. Bomann GmbH
C. Bomann GmbH
www.bomann
www.bomannwww.bomann
www.bomann-
--
-germany.de
germany.degermany.de
germany.de
Stand 01/18