BOMBAY The Tobias Table User manual
The Tobias Table
BO_4090_A3_EN_11.01.14
For questions or comments about your product, please contact us at
1-800-876-7336.
We guarantee that every product we sell will stand up
to the supreme test — our customers’ satisfaction.
A B C
Tobias Base Tray
111
D E F G H
Small Flat Washer Large Flat Washer Spring Washer Small Allen Bolt Long Allen Bolt
12112
LARGE PIECES
SMALL PIECES
I
Allen Wrench
1
TOOLS
ASSEMBLY INSTRUCTIONS
1. Secure the base (B) to Tobias (A) with
the two long Allen bolts (H) and the two
large at washers (E) using the Allen
wrench (I).
2. Position the tray (C) on top of Tobias’s
hand so that the peg on the bottom of
the tray ts into the small peg hole, Y
(see diagram).
3. Use the small Allen bolt (G), spring
washer (F), small at washer (D), and
Allen wrench (I) to attach the tray to
Tobias’s hand through the larger hole,
X (see diagram).
A
B
E
H
I
E
H
C
D
F
G
I
A
XY
WARNING
• This table is intended for decorative use only, maximum capacity 7 lbs. (3.18 kg).
• This table is NOT designed to hold excessive weight or to be used as a
seating surface.
• Improper use may result in damage to the table and/or bodily harm.
CARE AND MAINTENANCE
• Do not use harsh chemicals when cleaning the surface of the unit. Doing so will damage
the nish. It is best to wipe clean with a damp cloth.
• If you are located in a freeze/frost climate (32°F and below), store indoors for the
winter months.
ASSEMBLY NOTES
• Please make sure that you have all the parts indicated before you begin assembly.
• Items should be assembled on a soft surface to avoid scratching during assembly.
• This product may need periodic tightening. We recommend tightening every 6 months.
• Caution: Do not overtighten.
ATTENTION
Read all instructions before assembly and use of this product. Failure
to follow these instructions and warnings could result in injury
or damage to the item. Keep these instructions for future reference.
