Boncare MH6100F-A User manual

USER'S MANUAL
RAPID-HEAT HEATING PAD
WITH DIGITAL CONTROL
A
DON'T INSERT THE cONTROLLER INTO OTHER
HEATING PAD THAN THE ORIGINAL PACKED
IF YOU HAVE 2 OR MORE PADS!
[phone]
[email protected]
www.amazon.com/boncare
Boncare
MH610OF-A
MH6101 F-A

1. Read all instructions.
2.
DANGER: TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, FIRE, AND PERSONAL INJURY,
THIS PRODUCT MUST BE USED IN ACCORDANCE WITH THE FOLLOWING INSTRUCTIONS:
3.
4.
5.
6.
7.
8.
IMPORTANT SAFETY INSTRUCTIONS
9.
11.
DO NOT DESTROY
Do not use while sleeping.
Do not use on an infant or an animal.
This pad is not to be used on or by an invalid, a sleeping or unconscious person, a
person with diabetes, or a person with poor blood circulation.
Do not use on areas of sensitive skin.
Burns can occur regardless of control setting. Check skin under pad frequently.
Do not use in an oxygen enriched environment or near equipment which stores or
emits oXygen.
Do not use pins or other sharp or metallic objects to fasten this pad in place.
Do not bunch, sit on or against or crush pad. Avoid sharp folds.
10. Never pull this pad by the power cord.
Do not use the cord as a handle.
+Boncare
12. This unit should not be used by children without adult supervision.
13. Place pad on top of and not under the part of the body needing heat.
14. Use this pad only on a 110-120 volt AC circuit. Unplug when not in use.
15. Do not tamper with this pad in any way.
16. There are no user-serviceable parts. If for any reason this pad does not function
satisfactorily, see warranty for consumer service information.
17. Do not use this pad with liniment, salve or ointment preparations, especially ones
that contain heat-producing ingredients. Skin burns could result.
18. Do not bend or pinch cord and do not use if cord is damaged.
19. Never leave the appliance unattended, especially if children are present.
20. Loop cord loosely when storing. Tight wrapping may damage cord and internal parts.
21. When not in use, store the heating pad in the original packaging, in a dark, cool, dry
22. Save these instructions.
This appliance has a polarized plug (one blade is wider than the other), To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper
outlet.
Do
not
attempt
to
modify
this plug
or
defeat
this safety
feature
in any
way.
02

Make sure the control connector is securely attached to the pad connector (Figure
1). Push both parts together for a tight fit. NOTE: Control must be connected to
heating pad before plugging unit into outlet.
1. After control is connected to pad, plug into 120V
AC electrical outlet. The LCD display lights up
and goes out immediately. This heating pad
features RAPID-Heat. With
this
unique
RAPID-Heat technology, you will feel heat in 30
seconds - for faster pain relief!
HOW TO USE YOUR HEATING PAD
2. To turn the pad on, press the power button. The
LCD
display
lights
up.
The
default
temperature
setting is the lowest setting (104°F) and the
default timer setting is 1 hour.
3.
Press TEMP button to select temperature settings.
4. Press TIMER button to select Auto-Off timing.
The default setting is 1 hour. The 6 timer settings
1hr/1.5hr/2hr/15mins/30mins/45mins.
When you release the button, the countdown
timer starts automatically by minute.
7.
are:
5. Press and hold TEMP button for 2 to 3 seconds
to switch between Celsius and Fahrenheit.
6. If there is no more selection on the settings, the
pad will turn into operation status, and reach out
equilibrium condition.
The setting grid increases one by one each time you press the button. The temperature
figure changes accordingly (104/113/122/131/140/149°F). The pad starts heating immedi
ately when you release the button. When heated to the temperature of selected seting, it
stays at stable status.
A
B
A: Control Connector
B: Pad Connector
A: Display
10. See additional warnings.
B: Timer Button
C:Temp Button
(°C/°F)
D: Power Button
(ON/OFF)
+Boncare
8. DURING USE, NEVER PLACE THE CONTROLLER UNDER THE PAD.
B
49F
Tlmac
I59
The pad will shut off automatically when the timer reaches the selected setting. LCD
display goes out as well.
C
9. THE CONTROLLER MUST MATCH CORRESPONDENT MODEL. NEVER APPLY CON
TROLLER OF STD SIZE TO A LARGE SIZE PAD, AND VICE VERSA.
03

1.
In some cases, you may find that moist heat therapy provides more comfort and
relief. When using moist heat therapy, you should protect furniture and clothing
from becoming damp.
2. Do not spray or dampen the pad connector (figure 3), DANGER: Do
not immerse the pad or wiring in water or place under running water.
Failure to comply may result in product failure and/or personal injury
USING MOIST HEAT THERAPY
Dampen either side of the heating pad with water by patting the
surface with a wet sponge or cloth or use a spray bottle to apply a fine
mist. Do not thoroughly soak pad.
connection.
NOTE: The electrical pad connector must be thoroughly dry before establishing electrical
3.
AUTO-OFF FEATURE
DO NOT DRY CLEAN! DO NOT BLEACH! DO NOT USE WRINGER
4.
Your heating pad controller includes a selectable auto-off feature. By pressing the TIMER
button, you can choose from 6 timer options. The default time is 1 hour. The 6 timer settings
are: 1hr/1.5hr/2hr/15mins/30mins/45mins. NOTE: After a power outage, the auto-off feature
automatically resets to the defaullt timer.
1. Disconnect pad from outlet.
WASHING INSTRUCTIONS
2. Detach pad connector from the control connector.
+Boncare
FC
H,o
Do not plug in pad and pad connector until they are completely dry.
Figure-3
Wash by hand or as follows in an automatic washer using slow agitation and normal spin
speed: Fill washer with warm water. Add minimum amount of all-purpose detergent,
agitate to dissolve. Add heating pad and soak five minutes. Agitate two minutes. Spin.
Fill for cool rinse, agitate one minute then spin. Dry in automatic dryer on high heat, five
minutes only, or line dry. Remove damp heating pad from dryer, reshape it, and hang to
finish air drying. Do not iron your heating pad.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
04