BORK B800 User manual

OPERATING MANUAL
BLENDER
B800

2 3
DESCRIPTIONDESCRIPTION
2 3
HIGH POWER AND PROFESSIONAL
SAFETY
High power of 2,000W combined with the Kinetix blade system and square jar
design allows for professional milling within a short period of time. Thanks to
the Ice/ Auto Pulse ice crushing and intensive processing function, the blender
easily turns ice into snow.
KINETIX BLADE SYSTEM
The arrangement of six blades of different shapes eliminates any “dead zones”,
ensuring that products are mixed throughout the entire volume of the jar.
Durable alloy steel blades guarantee the perfect result.
• The central blades cut and mill the product.
• The broad blades mix the product.
The reservoir with the semi-sphere bottom minimizes sticking of products.
For convenient cleaning the blades can be removed and washed in the
dishwasher.

4 5
DESCRIPTIONDESCRIPTION
4 5
POLYCARBONATE 2 L JAR
The capacious two-liter jar made of food grade tempered polycarbonate is
resistant to damage, durable and does not get cloudy over time. The square
shape of the jar facilitates efficient mixing and milling.
AUTOMATIC MODES
BLEND Mode
Meant for making drinks, cocktails, sauces,
marinades, mobile dough and other dishes
requiring light blending of ingredients, as well
as for cooking pureed soups, musses and air-
saturated dishes.
In the BLEND mode the speed remains uniform
during 2 minutes, after which the blender is
switched off.
SMOOTHIE Mode
Meant for desserts, thick drinks from fruit, ice-
cream and yogurt, as well as for making whipped
cream and milk shakes.
The SMOOTHIE mode combines uniform rotation
speed with rotation at low and high speeds, which
change automatically for several times during 1
minute.
ICE/AUTO PULSE Mode
This mode can be used for crushing of ice or solid
products, for example, nuts, as well as for mixing
drinks containing ice cubes or frozen fruit.
The blender operates in this mode by rotation at
low and high speeds during 1 minute.

6 7
CONFIGURATIONCONFIGURATION
BLEND mode button
POWER button
ICE/AUTO PULSE mode button
SMOOTHIE mode button
Lid with auxiliary ring
Internal removable lid
Polycarbonate 2 l jar
KINETIX blade system
Base with motor
Blade set removal key

8 9
CONFIGURATIONCONFIGURATION
• Set the jar on the base with the motor.
The handle of the blender’s jar can be placed from
any convenient side.
• Plug in the blender. Press the POWER button.
• Place products in the blender’s jar and tightly
close the lid.
Make sure that the jar’s filling level does not exceed
the Max mark.
Do not take off the main lid when the blender is on.
• Place the transparent internal lid into the
blender’s main lid and turn it clockwise to fix it.
In order to add ingredients during mixing take off
the internal lid.
• Press the necessary mode button (BLEND,
SMOOTHIE, ICE/AUTO PULSE).
During operation hold the blender by the lid.
In case the blade set stalls, the blender will
automatically stop. Unplug the blender and clean
the blades and the blender’s jar with running water
and a special blade.
• In order to finish operation press the button of
the used mode.
• After usage switch off the blender by pressing
the POWER button and unplug it.

10 11
MAINTENANCE AND CLEANINGCONFIGURATION
REMOVAL OF BLADES
Blades can be removed for convenient cleaning.
Turn the blade set clockwise on the bottom side of
the blender’s jar with the special key and remove
the blades carefully.
The blender’s blades are very sharp and require
extremely careful handling.
SAFETY SYSTEM
In order to prevent the motor’s wear the blender
will automatically stop after one-two minutes of
continuous operation.
Operation mode Programmed time
BLEND 120 seconds
SMOOTHIE 60 seconds
ICE/AUTO PULSE 60 seconds
Never immerse the blender, the power cord or the
plug of the power cord in water or any other liquid.
Avoid formation of water condensate thereon,
do not use the blender in places with increased
humidity.
Clean the blender right after usage.
• Switch off and unplug the appliance.
• Take off the blender’s jar from the base.
• Wash all parts with warm soapy water.
• Turn the blade set clockwise on the bottom side
of the blender’s jar with the special key and
remove the blades carefully.
The blender’s blades are very sharp and require
extremely careful handling.
• Wash the blade set with running water and place
it in the jar base after preliminary putting on the
silicone seal.

12 13
SAFETY PRECAUTIONS
• Turn the blade set counterclockwise against the
stop to fix it tightly in the jar.
For easy cleaning pour some water into the
blender’s jar, add a drop of the cleaning agent and
switch on for several seconds. Then rinse with clear
water.
CLEANING OF THE BLENDER’S CASING
The outside part of the blender’s casing can be first
wiped with a wet napkin soaked with soapy solution
and then with a soft dry napkin or use a special
agent for cleaning of metal surfaces.
When cleaning the blender do not use wire
wools, chemical agents, abrasive cleaning agents
containing sulfanilic or citric acid.
STORAGE OF THE BLENDER
Store the appliance assembled in the vertical
position.
• The blender is meant for blending of liquids and
food. Use the blender for the purpose specified.
• This appliance shall be used only in home
conditions.
• The blender shall not be used by unattended
children.
• Before usage make sure that the appliance is
properly and entirely assembled.
• Place the appliance only on a dry even horizontal
surface. Do not place the blender on a gas or
electric oven, and in a close proximity to sources
of heat.
• Never immerse the base with the motor, the
power cord or the plug of the power cord in water
or any other liquid. Avoid formation of water
condensate thereon, do not use the blender in
places with increased humidity.
• Do not leave the operating blender unattended.
• Do not overload the blender’s jar – do not fill
it above the maximum level mark. Excessive
amount of products can stop the motor.
• Do not mix hot products and liquids in the
blender. Let them cool down before placing them
in the jar.
• Always unplug the appliance after use, as well as
before assembly, dismantling and storage.
• The blender’s blades are very sharp and require
extremely careful handling. Do not place your
hands in the blender’s jar when it is plugged.
• Avoid hanging of the cable down the edge of the
table, do not lay in on heating surfaces, avoid
cable jam.
• Do not move the operating blender. Do not
remove the blender’s lid and jar from the base
during operation.
• Do not place any parts of the blender into
a microwave oven.
• Do not use the jar for storage of products.
• Do not switch on the blender without food or
liquids.
• In order to ensure the blender’s safety and
correct operation use only BORK’s original parts.
• Regularly inspect the power cord, the plug of
the power cord and the blender for damages.
Upon detection of any damages immediately
suspend operation of the blender and bring it to
the nearest service center for testing, repair or
replacement.
• For safety reasons all operations on repair
and maintenance of the blender, except for
cleaning, shall be performed only by authorized
representatives of BORK certified service
centers.

14 15
TROUBLESHOOTINGADVICE AND RECOMMENDATIONS
Failure Solutions
The motor is not switched on, the blades
do not rotate.
• Make sure of correct placement of the blender’s jar
• Make sure that the appliance is plugged in.
Products are blended unevenly • Cut ingredients into equal pieces of 2-3 cm
• In order to avoid excessive processing of products control the received texture
• If necessary, use ICE/AUTO PULSE button
• Do not fill the blender’s jar above the maximum level mark
The blender is overloaded • Remove some mixture, cut products into smaller pieces or process a smaller amount of ingredients at a time
• If automatic switch off is activated, unplug the blender and let it cool down for 30 minutes until the motor gets entirely cold.
• Before switching on the blender check safety of
the jar’s fixation. Do not use the blender without
the lid. If you need to add ingredients into the jar
during operation take off the internal lid and add
all necessary ingredients though the opening in
the lid.
• When making pureed vegetables or fruit (boiled
or fresh) cut them preliminary into pieces of 2-3
cm – this will simplify the process of blending.
• Do not exceed 1,8 l liquid level for light texture
(bullion, milk shake) and 0,8-1,2 l for thick
texture(pureedsoups,sauces,watereddough.•
When mixing ingredients of different texture first
mix liquids and then add dry ingredients, unless
otherwise specified in the recipe.
• In order to avoid blade damage remove
kernels from fruit and bones from meat before
processing.
• Wash the blender right after use.
• Do not process very hot products in the blender.
Cool them down before blending.
• Chop hot ingredients using ICE/AUTO PULSE
mode.
• The blender is not meant for making thick dough
and mashed potatoes.
• In order to avoid excessive processing of
products control the received texture.
• If necessary, periodically take off the lid and
clean the mixture from the side surfaces of the
jar using a special blade. Before taking off the lid
make sure that the blades have fully stopped.
• When switching on the blender and operating at
maximum speed hold the blender’s jar.
• In order to prevent the motor’s wear the blender
will stop automatically after two minutes of
continuous operation.
• When blending thick mixtures do not use the
blender for more than 10 seconds.

16
SPECIFICATIONS
Voltage: 230–240 V
Frequency: 50 Hz
Power: 1 850–2 000 W
Weight: 5 kg
Caution! The manufacturer reserves the right
to make changes to specifications as a result of
continuous product updating without additional
notice thereon.
CONFIGURATION
Blender: 1 pc.
Blade set removal tool: 1 pc.
Operating manual with guarantee card: 1 pc.