6 | English
uKeep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
uUse the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
uKeep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Battery tool use and care
uRecharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of bat-
tery pack may create a risk of fire when used with another
battery pack.
uUse power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
uWhen battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
uUnder abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the bat-
tery may cause irritation or burns.
uDo not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
uDo not expose a battery pack or tool to fire or excess-
ive temperature. Exposure to fire or temperature above
130°C may cause explosion.
uFollow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
Service
uHave your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
uNever service damaged battery packs. Service of bat-
tery packs should only be performed by the manufacturer
or authorized service providers.
Safety instructions for blower
uDo not blow any harmful substances, e.g. beech or oak
wood dust, rock dust or asbestos. These substances are
classified as carcinogenic.
uDo not blow any liquids. The penetration of liquids in-
creases the risk of an electric shock.
uPay attention that bystanders are not injured by for-
eign objects that are blown off by the product.
uKeep your fingers away from the openings of the
power tool during operation. Only operate the blower
with a nozzle attached. The rotating fan can injure you.
uEnsure that the workplace is well ventilated.
uDo not let children use the power tool unsupervised.
Children are at risk of injuring themselves this way.
uWear additional personal protective equipment such
as protective glasses and a protective mask. Wearing
personal protection equipment appropriate to the condi-
tions reduces your exposure to hazardous substances.
uIn case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
uDo not open the battery. There is a risk of short-circuit-
ing.
uThe battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
uOnly use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for blowing away non-harmful
substances (e.g. sawing debris, metal chips, stone dust,
etc.) produced during sawing, drilling or grinding. Drill holes
can also be blown out with the appropriate accessories.
The power tool is not suitable for blowing hot, flammable or
explosive materials.
1 609 92A 4YE | (05.09.2019) Bosch Power Tools
