Bosch WEU PLC 10 User manual

Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
www.bosch-pt.com
1 619 929 J69 (2011.08) T / 45 WEU
WEU WEU
OffOffOff OnOnOn
OffOffOff OnOnOn
Off
Off
On
On
Off
Off
On
On
PCL 10
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Ðñùôüôõðï ïäçãéþí ÷ñÞóçò
tr Orijinal işletme talimat
ar
fa
ΕΎϤϴϠόΗϞϴϐθΘϟ΍ΔϴϠλϷ΍
Ϡλ΍ έΎ ίήσ ΎϤϨϫ΍έ
OBJ_BUCH-693-003.book Page 1 Friday, August 5, 2011 8:57 AM

| 3
Bosch Power Tools 1 619 929 J69 | (5.8.11)
OffOffOff OnOnOn
OffOffOff OnOnOn
Off
Off
On
On
Off
Off
On
On
1
7
6
6
8
2
3
4
9
10
11
5
6
2 607 990 031
PCL 10
OBJ_BUCH-693-003.book Page 3 Friday, August 5, 2011 9:01 AM

1 619 929 J69 | (5.8.11) Bosch Power Tools
4|
Off On
Off On
OffOffOff OnOnOn
Off On
>4°
>4°
OffOffOff OnOnOn
Off On
>4°
±4°
±4°
OffOffOff OnOnOn
Off On
DC
B
A
OBJ_BUCH-693-003.book Page 4 Friday, August 5, 2011 9:01 AM

| 5
Bosch Power Tools 1 619 929 J69 | (5.8.11)
XX
F
E
OBJ_BUCH-693-003.book Page 5 Friday, August 5, 2011 9:01 AM

8| English
1 619 929 J69 | (5.8.11) Bosch Power Tools
Kundendienst und Kundenberatung
Der Kundendienst beantwortet Ihre Fragen zu Reparatur und
Wartung Ihres Produkts sowie zu Ersatzteilen. Explosions-
zeichnungen und Informationen zu Ersatzteilen finden Sie
auch unter:
www.bosch-pt.com
Das Bosch-Kundenberater-Team hilft Ihnen gerne bei Fragen
zu Kauf, Anwendung und Einstellung von Produkten und Zu-
behören.
www.bosch-do-it.de,dasInternetportal für Heimwerkerund
Gartenfreunde.
www.dha.de,daskompletteService-AngebotderDeutschen
Heimwerker Akademie.
Deutschland
Robert Bosch GmbH
Servicezentrum Elektrowerkzeuge
Zur Luhne 2
37589 Kalefeld – Willershausen
Tel. Kundendienst: [phone]*
Fax: [phone]*
(*Festnetzpreis 14 ct/min, höchstens 42 ct/min aus Mobil-
funknetzen)
E-Mail: Servicezentrum.Ele[email protected]
Tel. Kundenberatung: [phone]
(Festnetzpreis 9 ct/min, höchstens 42 ct/min aus Mobil-
funknetzen)
Fax: [phone]
E-Mail: [email protected]
Österreich
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Schweiz
Tel.: [phone]
Fax: [phone]
Luxemburg
Tel.: [phone]
Fax: [phone]
E-Mail: outillage.gere[email protected]
Entsorgung
Messwerkzeuge, Zubehör und Verpackungen sollen einer
umweltgerechten Wiederverwertung zugeführt werden.
Werfen Sie Messwerkzeuge und Akkus/Batterien nicht in den
Hausmüll!
Nur für EU-Länder:
Gemäß der europäischen Richtlinie
2002/96/EG müssen nicht mehr ge-
brauchsfähige Messwerkzeuge und gemäß
der europäischen Richtlinie 2006/66/EG
müssen defekte oder verbrauchte Akkus/
Batterien getrennt gesammelt und einer
umweltgerechten Wiederverwendung zu-
geführt werden.
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt
abgegeben werden bei:
Deutschland
Recyclingzentrum Elektrowerkzeuge
Osteroder Landstraße 3
37589 Kalefeld
Schweiz
Batrec AG
3752 Wimmis BE
Änderungen vorbehalten.
English
Safety Notes
Working safely with the measuring tool is
possibleonlywhentheoperatingandsafety
information are read completely and the in-
structions contained therein are strictly fol-
lowed. Never make warning labels on the
measuring tool unrecognisable. SAVE
THESE INSTRUCTIONS.
fCaution – The use of other operating or adjusting
equipmentor the application of otherprocessing meth-
ods than those mentioned here, can lead to dangerous
radiation exposure.
fThe measuring tool is delivered with a warning label in
German language (marked with the number 7 in the rep-
resentation of the measuring tool on the graphic page).
fBefore putting into operation for the first time, attach
the supplied sticker in your national language over the
German text on the warning label.
fDo not direct the laser beam at persons or animals and
do not stare into the laser beam yourself. This measur-
ing tool produces laser class 2 laser radiation according to
IEC 60825-1. This can lead to persons being blinded.
fDo not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tionofthe laser beam, buttheydo not protect againstlaser
radiation.
fDonotusethe laser viewing glassesassun glasses orin
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
fHave the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
fDo not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
OBJ_BUCH-693-003.book Page 8 Friday, August 5, 2011 9:01 AM

English | 9
Bosch Power Tools 1 619 929 J69 | (5.8.11)
fDonotoperate the measuringtool in explosiveenviron-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
Product Description and
Specifications
Intended Use
The measuring tool is intended for determining and checking
horizontal and vertical lines.
The measuring tool is suitable exclusively for operation in
enclosed working sites.
Product Features
The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1Exit opening for laser beam
2Automatic levelling indicator
3On/Off switch
4Latch of battery lid
5Battery lid
6Contact surface
7Laser warning label
8Tripod mount 1/4"
9Protective pouch
10 Laser viewing glasses*
11 Tripod*
* The accessories illustrated or described are not included as
standard delivery.
Technical Data
Assembly
Inserting/Replacing the Battery
Alkali-manganese batteries are recommended for the meas-
uring tool.
Toopen thebattery lid5, presson the latch 4and fold the bat-
tery lid up. Insert the batteries. When inserting, pay attention
to the correct polarity according to the representation on the
inside of the battery compartment.
Always replace all batteries at the same time. Only use batter-
ies from one brand and with the identical capacity.
fRemove the batteries from the measuring tool when
not using it for extended periods. When storing for ex-
tended periods, the batteries can corrode and discharge
themselves.
Operation
Initial Operation
fProtectthe measuring tool against moisture and direct
sun light.
fDo not subject the measuring tool to extreme tempera-
tures or variations in temperature. As an example, do not
leave it in vehicles for longer periods. In case of large varia-
tions in temperature, allow the measuring tool to adjust to
the ambient temperature before putting it into operation.
fAvoid heavy impact to or falling down of the measuring
tool. Damage to the measuring tool can impair its accuracy.
After heavy impact or shock, compare the laser line with a
known horizontal or vertical reference line.
fSwitch the measuring tool off during transport. When
switching off, the levelling unit, which can be damaged in
case of intense movement, is locked.
Switching On and Off
To switch on the measuring tool, push the On/Off switch 3to
the “On” position. Immediately after switching on, the meas-
uring tool sends two laser beams out of the exit opening 1.
fDo not point the laser beam at persons or animals and
do not look into the laser beam yourself, not even from
a large distance.
To switch off the measuring tool, slide the On/Off switch 3to
the “Off” position. When switching off, the levelling unit is
locked.
fDonotleavethe switched onmeasuring tool unattended
and switch the measuring tool off after use. Other per-
sons could be blinded by the laser beam.
Working with Automatic Levelling (see figures A–B)
Position the measuring tool on a level and firm support, hold
itby the contactsurfaces 6against avertical surfaceor attach
it to a tripod 11.
After switching on, the levelling function automatically com-
pensates irregularities within the self-levelling range of ±4°.
The levelling is finished as soon as the laser beams do not
move any more. The indicator 2lights up green.
Cross-line Laser PCL 10
Article number 3 603 K08 1..
Working range to approx. 10 m
Levelling Accuracy ±0.5 mm/m
Self-levelling range, typically ±4°
Levelling duration, typically 4s
Operating temperature +5 °C...+40 °C
Storage temperature –20 °C...+70 °C
Relative air humidity, max. 90 %
Laser class 2
Laser type 635 nm, <1 mW
C6>10
Tripod mount 1/4"
Batteries 2x1.5VLR06(AA)
Operating life time, approx. 15 h
Weight according to
EPTA-Procedure 01/2003 0.4 kg
Dimensions (length x width x height) 108x66x92mm
Please observe the article number on the type plate of your measuring
tool. The trade names of the individual measuring tools may vary.
OBJ_BUCH-693-003.book Page 9 Friday, August 5, 2011 9:01 AM

10 | English
1 619 929 J69 | (5.8.11) Bosch Power Tools
If the automatic levelling function is not possible, e. g. be-
cause the surface on which the measuring tool stands devi-
ates by more than 4° from the horizontal plane, the indicator
2lights up red and the laser is automatically switched off. In
thiscase,bringthemeasuringtooltothelevelposition or hold
it by the contact surfaces 6straightly against a vertical sur-
face, and wait for the self-levelling to take place. As soon as
the measuring tool is within the self-levelling range of ±4°
again, the indicator 2lights up green and the laser beams are
switched on.
When not within the self-levelling range of ±4°, working with
the measuring tool is not possible, because it cannot be as-
sured that the laser beams run at a right angle to each other.
In case of ground vibrations or position changes during opera-
tion, the measuring tool is automatically levelled in again. To
avoid errors, check the position of the horizontal and vertical
laser line with regard to the reference points upon re-levelling.
Working Advice
Working with the Tripod (see figure C)
A tripod 11 offers a stable, height-adjustable measuring sup-
port.Place the measuring tool via the tripod mount 8ontothe
1/4" male thread of the tripod and screw the locking screw of
the tripod tight.
Holding Laterally against a Wall or Object (see figure D)
For quick checking of heights, the measuring tool can be held
by the contact surfaces 6laterally against a vertical wall, cab-
inets, etc. Take care to hold the measuring tool straightly and
calmly.
Laser Viewing Glasses (Accessory)
The laser viewing glasses filter out the ambient light. This
makes the red light of the laser appear brighter for the eyes.
fDo not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tionofthe laser beam, buttheydo not protect againstlaser
radiation.
fDonotusethe laser viewing glassesassun glassesorin
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
Maintenance and Service
Maintenance and Cleaning
Store and transport the measuring tool only in the supplied
protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Regularly clean the surfaces at the exit opening of the laser in
particular, and pay attention to any fluff of fibres.
If the measuring tool should fail despite the care taken in man-
ufacturing and testing procedures, repair should be carried
outby anauthorised after-sales service centre for Bosch pow-
er tools. Do not open the measuring tool yourself.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the measuring tool.
In case of repairs, send in the measuring tool packed in its
protective pouch 9.
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can
also be found under:
www.bosch-pt.com
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of
products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: [phone]
Fax: [phone]
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: [phone]
Fax: [phone]
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: [phone]
Fax: [phone]
Inside New Zealand:
Phone: [phone]
Fax: [phone]
Outside AU and NZ:
Phone: [phone]
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: [phone]
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
OBJ_BUCH-693-003.book Page 10 Friday, August 5, 2011 9:01 AM

English | 11
Bosch Power Tools 1 619 929 J69 | (5.8.11)
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Bosch Headquarters
Midrand, Gauteng
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
People’s Republic of China
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: [phone]
Fax: [phone]
E-Mail: [email protected]
www.bosch-pt.com.cn
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King’s Road
North Point, Hong Kong
Customer Service Hotline: [phone]
Fax: [phone]
E-Mail: [email protected]
www.bosch-pt.com.hk
Indonesia
PT. Multi Mayaka
Kawasan Industri Pulogadung
Jalan Rawa Gelam III No. 2
Jakarta 13930
Indonesia
Tel.: [phone]
Fax: [phone] 23
E-Mail: [email protected]
www.bosch-pt.co.id
Philippines
Robert Bosch, Inc.
28th Floor Fort Legend Towers,
3rd Avenue corner 31st Street,
Fort Bonifacio Global City,
1634 Taguig City, Philippines
Tel.: [phone]
Fax: [phone]
[email protected]
www.bosch-pt.com.ph
Bosch Service Center:
9725-27 Kamagong Street
San Antonio Village
Makati City, Philippines
Tel.: [phone]
Fax: [phone]
[email protected]
Malaysia
Robert Bosch (S.E.A.) Pte. Ltd.
No. 8A, Jalan 13/6
G.P.O. Box 10818
46200 Petaling Jaya
Selangor, Malaysia
Tel.: [phone]
Fax: [phone]
[email protected]
Toll-Free: 1800 880 188
www.bosch-pt.com.my
Thailand
Robert Bosch Ltd.
Liberty Square Building
No. 287, 11 Floor
Silom Road, Bangrak
Bangkok 10500
Tel.: [phone] – 18 88 (10 lines)
Fax: [phone]
Robert Bosch Ltd., P. O. Box 2054
Bangkok 10501, Thailand
Bosch Service – Training Centre
2869-2869/1 Soi Ban Kluay
Rama IV Road (near old Paknam Railway)
Prakanong District
10110 Bangkok
Thailand
Tel.: [phone] – 4
Fax: [phone]
Fax: [phone]
Singapore
Robert Bosch (SEA) Pte. Ltd.
11 Bishan Street 21
Singapore 573943
Tel.: [phone]
Fax: [phone]
[email protected]
Toll-Free: 1800 333 8333
www.bosch-pt.com.sg
Vietnam
Robert Bosch Vietnam Co. Ltd
10/F, 194 Golden Building
473 Dien Bien Phu Street
Ward 25, Binh Thanh District
84 Ho Chi Minh City
Vietnam
Tel.: [phone] ext. 413
Fax: [phone]
[email protected]
www.bosch-pt.com
OBJ_BUCH-693-003.book Page 11 Friday, August 5, 2011 9:01 AM