Redback lasers Unilevel ung6631 User manual

Green Multi 360 Line Laser Instruction Manual

The UNG6631 is an auto levelling 360 degree green multi-line laser. The laser provides horizontal

levelling, Vertical alignment, 90 degree square and plumb up and down. The laser features a class

3r <5mW green output. The UNG6631 is ideal for all manner of internal t out applications and

can be used outdoors with an OPTIONAL LLR705 Line Receiver. The laser comes with a magnetic

mounting base which also allows the laser to mount on to either a survey or camera style tripod if

required. The laser is powered by a Li-ion rechargeable battery or standard “AA” cells.

Soft Carry Bag

Magnetic Mount with

Adjustement

Locking Switch

Operation

First insert the Li-ion rechargeable battery making sure the three

terminal are facing inside the battery compartment. The battery is

charged using the supplied charger or any USB A output. To charge

remove battery from the laser and plug directly into the battery.

Alternatively you can charge the battery inside the unit using the USB

C socket below the battery compartment. You can also use standard

“AA” batteries if required with the standard battery holder.

www.redbacklasers.com.au

UNG6631

Green 360 Horizontal and

Vertical Multi-Line Laser

Top Mount for Magnetic

Bracket (another mounting point is

also located on base of laser)

Li-ion Battery & “AA” Holder

Low battery

warning light

Horizontal/Verti-

cal Line Switch

Pulse Mode / Flash

Mode Button

USB Charging Cable

& Charger

Remote Control

Elevating Platform Laser Target

Horizontal

Switch

Pulse Mode

Vertical Switch

The UNG6631 has an out of level alarm which comprises of a loud beeping sound and the lasers ashing. This indicates the laser

is outside of self levelling range. To get into range place the laser on a more level surface. Once in self leveling range the beeping

and ashing will stop and the laser lines will be solid.

To power up simply ick the pendulum locking switch to the on position. The Horizontal 360 degree line comes on automatically.

Press the H/V button to toggle through all the lines to select the ones you want. To power o simply ick the lock switch back to

o.

The UNG6631 features pulse mode which allows the laser to use an OPTIONAL suitable line receiver allowing outdoor use over a

40m range (suitable line receiver the RedBack LLR705). To enable pulse mode simply power the laser up as normal and then press

the P button on the control panel, you will see the lasers dim slightly. A suitable laser receiver will now be able to pick up the laser

line. A second press of the P button enable ash mode, this may make it more visible in some situations.

The UNG6631 comes with a wide range of accessories which provide a wide degree of mounting options. The Magnetic bracket

can be mounted either on the top of the laser or on its base depending on your needs. The laser can also be mounted on a cam-

era style tripod. The laser comes with an elevating platform this is useful to ne adjust the height of the horizontal line, particu-

larly for oor levelling applications. There is also a metal plate for magnetically mounting onto wooden studs.

Warranty Information – CMI Industries Pty Ltd

The Principles behind our warranty.

• Duration of warranty is xed and automatic, when we advertise 1 year on a particular model, its two years. No drop down to a lesser time if you forget to register, registration is NOT

required just proof of purchase showing date. Please check your specic model for duration of warranty, see the end of this document.

• Although the duration of our warranties are for a particular period it does not mean we will charge you for a genuine warranty failure a month or two outside that warranty period, we

believe in a fair go.

• Even though a product shows signs of accidental damage, scratches and the like, we will not automatically fail the warranty claim, if the fault is NOT caused by a drop or misuse and is

a genuine warranty failure then we will cover it.

• Our aim is to return repaired or replaced products as soon as possible as we know that being without your tool can be inconvenient. Our goal is a 72 hour turnaround (3 working

days) after receiving it. Sometimes, however, a product with an intermittent fault may need extended testing to make sure we have made a full repair.

• Calibration is not covered by warranty much the same as the wheel balance on your car is not covered by warranty.

Now The Details and Legals

CMI Industries Pty Ltd provides consumers with a warranty to our products, this is in addition to the requirements of any relevant legislation such as the Competition and Consumer Act 2010.

Denitions:

“CMI”, “We” or “Our” refers to CMI Industries Pty Ltd (ABN 29 102 713 922) of Unit 2 181-183 Thompson Rd, Bell Park, Victoria 3215 ph 1800 769 858

“You” or “Consumer” refers to the initial purchaser of the product.

“Product” refers to goods manufactured by or for CMI Industries Pty Ltd under the brands of RedBack Lasers, Level1Laser and UniLevel and include Laser and Optical Levels, Measuring tools and

accessories.

“Material” refers to material or component used in the construction and manufacture of the product.

“Workmanship” refers to handling, assembly and manufacturing processes done by or for CMI Industries Pty Ltd in order to manufacture the products.

“Warranty Period” varies depending on brand and model sold by CMI please see table at end for your products warranty period. Warranty period is from original purchase date only, no extension is

made in the event of warranty replacement products being supplied or time spent being repaired.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

CMI warrants that our products will be free from defects in material and workmanship for the stated period for the product supplied (see “warranty period” following)

CMI promises to repair or replace, free of charge, the product or part of product if found to be faulty due to defective workmanship or materials within the duration of the warranty stated as long as

the following terms and conditions are met;

• Product must not have been misused or abused, must not have incurred accidental damage or had un-authorised repair or tampering that has caused or contributed to its fault or

failure.

• You must contact CMI by phone, mail or email immediately when a fault or defect has become apparent and within the warranty period.

• Product must be returned to store of purchase or directly to CMI, we will cover cost of postage only when sent by our reply paid Australia Post service (Australian Mainland and

Tasmania only) details provided upon phone, post or email with us.

• CMI will cover cost of freight back of repaired or replaced product to original purchase store or you directly (depending on how it was sent Australian Mainland and Tasmania only).

• CMI will determine whether repair or replacement of product or part of product will be made on the merits of each case.

• Further exclusions in this warranty include damage or defect caused by use of non-original accessories or parts, damage in transportation, normal wear and tear, damage through

moisture, damage due to electric surge, failure due to neglect or damaged caused by adjustments not outlined in CMI’s instructions.

Subject to the requirements of all applicable Australian Acts or legislation and to the extent permitted by law, CMI accepts no liability (whether expressed or implied) of any nature whatsoever for

any loss of earnings, hiring of replacement equipment, Inaccurate work carried out by the consumer or agent, damage or injury arising as a result of any fault in the product. It is the consumer’s

responsibility to maintain good working practices and regularly test their tools for accuracy and serviceability.

Calibration of the product is not covered by warranty subject to the requirement of all applicable Australian Acts or legislation and to the extent permitted by law.