Bosch VIP X1 User manual

Video | VIP X1 Single-channel Video Encoder
VIP X1 Single-channel Video Encoder
www.boschsecurity.com
uSingle-channel encoder with Dual Streaming
uHigh-quality MPEG‑4 from QCIF to 4CIF
uUSB and iSCSI recording
uUltra-compact size
uMulticast and Internet streaming
The VIP X1 features DVD-like quality MPEG‑4 video, at
up to 25/30 images per second, over IP networks. This
unit supports PAL and NTSC sources.
The audio models of the VIP X1 provide bidirectional
audio communication in parallel to video. Besides the
standard line level interface, built in amplifiers allow
direct connection to microphone and speaker.
The VIP X1 Power-over-Ethernet models can be power-
fed via the network cable.
The VIP X1 provides Dual Streaming. It is able to
generate two independently configurable MPEG‑4
video streams. The VIP X1 is ultra-compact, so it is
perfect for any application that depends on space-
saving solutions.
Functions
Viewing
The VIP X1’s video can be viewed on a PC using a
simple Web browser such as Internet Explorer or the
Bosch Video Management System. It can also be
integrated into other video management systems using
the Bosch VideoSDK.
By routing the IP video to a high-performance VIP XD
video decoder or a VIDOS Monitor Wall you can
present the video with ultimate clarity on an analog
CCTV or large, flat-screen VGA monitor or TV.
Recording
The VIP X1 offers unparalleled recording options—
locally on a USB hard disk, network-attached utilizing
iSCSI devices, and of course centrally using Network
Video Recorders. The iSCSI RAID storage enables the
VIP X1 to act as a conventional DVR as well as to
stream high-performance live video across the
network.
Dual Streaming
The VIP X1 uses Dual Streaming to generate two
independent IP video streams per channel if sufficient
computational power is available. This allows viewing
and recording at two different quality levels to save
disk space and bandwidth. On alarm, it may send out
e‑mail with JPEG images attached.
Access Security
The VIP X1 encoders offer various security levels for
accessing the network, the unit, and the data
channels. As well as password protection with three
levels, they support 802.1x authentication using a
RADIUS server for identification. You can secure Web
browser access by HTTPS using a SSL certificate that
is stored in the unit. For total data protection, each
communication channel—video, audio, or serial I/O—
can be independently AES encrypted with 128‑bit
keys, once the Encryption Site License has been
applied.

Intelligence
With built-in video content analysis, VIP X1 supports
increased intelligence at the edge. VIP X1 comes with
MOTION+ video motion detection built-in.
MOTION+ is a pixel-change-based motion detection
algorithm that includes object size filtering capabilities
and sophisticated tamper detection capabilities
including:
• video loss
• image too bright (detect blinding)
• image too dark (hooding, spray painting)
• image too noisy (camera defocused)
• gross scene change (camera repositioned)
More advanced video content analysis (VCA)
applications are offered with Bosch’s Intelligent Video
Motion Detection (IVMD). A licensable option, the
IVMD algorithm is based on digital imaging technology
and uses multi-level image analysis of pixel, texture,
and motion changes.
IVMD dynamically adapts to global lighting changes
and weather conditions (e.g. rain, snow, blowing
leaves, etc.). IVMD detects objects entering or leaving
an area (detector field) and includes user definable
filters for object size, direction of travel (single and
dual), and speed. IVMD includes the same tamper
detection filters as MOTION+.
These powerful devices represent the cutting edge of
high-performance Video-over-IP for CCTV today.
Easy Upgrade
Remotely upgrade the VIP X1 encoders whenever new
firmware becomes available. This ensures up-to-date
products, thus protecting investment with little effort.
Certifications and approvals
Approvals
Safety
Region Number
IEC 60950
System
Region Number
IEC 62676-2
EN50132-5-2
Electromagnetic Compatibility
Region Number
EU EN55103‑1 Video and audio equipment
EN55103‑2 Video and audio equipment
EN50130‑4 Alarm systems
EN55022 ITE
EN55024 ITE
EN61000‑3‑2
EN61000‑3‑3
US FCC 47 CFR Chapter 1 Part 15
Region Certification
Europe CE VIP X
CE VIP-X-PS
USA UL VIP X
UL Bosch UL online certifications directory
(link)
Installation/configuration notes
Dimensions in mm (inches)
Front Connectors and Indicators
Non-audio models
1Video In 1
2 | VIP X1 Single-channel Video Encoder

Audio models
1Video In 1 3 Microphone in , speaker out
2 Line In 4 Line Out
Rear Connectors and Indicators
All models
1USB port 5 LED Link
2 Reset: factory default 6 LED Traffic
3 Alarm in, relay out, power,
COM (RS‑232/422/485)
7 10/100 Base‑T Fast
Ethernet
4 LED Power
Rack Mounting Kit (Optional)
Parts included
Quantity Component
1VIP X1 single-channel video encoder, or
VIP X1A single-channel video/audio encoder, or
VIP X1P single-channel video encoder with PoE, or
VIP X1AP single-channel video/audio encoder with PoE
1 International plug-in power supply
1 RS‑232 null modem cable
1 Quick Installation Guide
1 CD-ROM with software and documentation
Technical specifications
Electrical
Power supply VIP‑X‑PS included in the box
Input voltage 12 to 24 VDC
Power consumption Approx. 6 VA
PoE models
additionally
802.3af, class 2
• power output 2.5 W max
Input/output
Video 1 x input
• connector BNC
• impedance 75 ohm, switchable
• signal Analog composite, 0.7 to 1.2 Vpp, NTSC or
PAL
Audio (audio versions
only)
1 x mono line in, 1 x mono line out, 1 x
microphone input, 1 x speaker output
• connector 2 x 3.5 mm stereo jack, 1 x CombiCon
• signal line in 9 kohm typical, 5.5 Vpp max
• signal line out 16 ohm min, 3.0 Vpp max
• signal
microphone
2 kohm typical, 2.8 Vpp max at -20 dB,
2.3 Vpp typical
• signal speaker 4 ohm min, 6 Vpp max, 1 W RMS
Alarm 4 x input
• connector Clamp (non-isolated closing contact)
• activation
resistance
10 ohm max
Relay 1 x output
• connector Clamp
• signal 30 Vpp, 2 A
COM port Clamp, RS‑232/422/485
Video
Standards MPEG‑4, M‑JPEG, JPEG
Data rates 9.6 kbps to 6 Mbps
Resolution Horizontal x vertical PAL/NTSC
• 4CIF 704 x 576/480 (25/30 ips*)
• 2CIF 704 x 288/240 (25/30 ips*)
• 2/3 D1 464 x 576/480 (25/30 ips*)
3 | VIP X1 Single-channel Video Encoder

• 1/2 D1 352 x 576/480 (25/30 ips*)
• CIF 352 x 288/240 (25/30 ips*)
• QCIF 176 x 144/120 (25/30 ips*)
* Depending on picture content and
movement
GOP structure I, IP
Overall IP delay 120 ms
Frame rate 1 to 50/60 (PAL/NTSC)
Audio (audio versions
only)
Standard G.711; 300 Hz to 3.4 kHz
Data rate 80 kbps at 8 kHz sampling rate
Network
Ethernet 10/100 Base‑T, auto-sensing, half/full
duplex, RJ45
Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,
FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP,
SNTP, SNMP, 802.1x
Encryption TLS 1.0, SSL, AES (optional)
Control
Software update Flash ROM, remote programmable
Configuration Configuration Manager or Web browser
Connections
USB port 1 x USB 2.0 high-speed port, 2.5 W max
feed
Mechanical
Dimensions (H x W x D) 26 x 85 x 107 mm (1.02 x 3.35 x 4.21 in)
Weight Approx. 0.17 kg (0.37 lb)
Environmental
Operating temperature 0 °C to +50 °C (+32 °F to +122 °F) ambient
temperature
Relative humidity 20 to 80% atmospheric humidity, non-
condensing
Thermal value 21 BTU/h max
Ordering information
VIPX1
MPEG-4 dual-stream 1-channel encoder, USB, serial
I/O, alarm in, relay
Order number VIPX1
VIPX1A
MPEG-4 dual-stream 1-channel encoder, USB, audio,
serial I/O, alarm in, relay
Order number VIPX1A
VIPX1P
MPEG-4 dual-stream 1-channel encoder, USB, PoE,
serial I/O, alarm in, relay
Order number VIPX1P
VIPX1AP
MPEG-4 dual-stream 1-channel encoder, USB, audio,
PoE, serial I/O, alarm in, relay
Order number VIPX1AP
Accessories
VIPRMK1HU
VIP X/10/1000 rack-mount kit for 5 units (1HU)
Order number VIPRMK1HU
VIP‑X-PS
Power supply
Order number VIP-X-PS
DVA-12T-04100RA iSCSI Diskarray 12-bay
4 HDD, 4 TB
Order number DVA-12T-04100RA
DVA-12T-12100RA iSCSI Diskarray 12-bay
12 HDD, 12 TB
Order number DVA-12T-12100RA
Software Options
VIP‑X1‑FS1
VIP X1 IVMD 1.0 VCA software license
Order number VIP-X1-FS1
SFT-VASA Hybrid IP - Analog/Matrix Video over IP Inte-
gration Software
Order number SFT-VASA
BVIP AES 128 Bit Encryption
One-time installation licence for BVIP AES 128‑bit
encryption site. Enables encrypted communication
between BVIP devices and management stations.
Order number MVS-FENC-AES
4 | VIP X1 Single-channel Video Encoder

5 | VIP X1 Single-channel Video Encoder
Represented by:
Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.us
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[email protected]
www.boschsecurity.com
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.asia
Bosch (Shanghai) Security Systems Ltd.
201 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone [phone]
Fax: [phone]
www.boschsecurity.com.cn
Robert Bosch Ltda Security Systems Division
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.com
© Bosch Security Systems 2013 | Data subject to change without notice
1544925323 | en, V1, 04. Oct 2013