Bosch IXO User manual

Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 66B (2020.12) AS / 212
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
ar   
1 609 92A 66B
IXO

| 3
IXO
(1)
(2) (3)
(4) (5)
(6)
(11)
(7)(8)
(12)
(13)
(14)
A
Bosch Power Tools 1 609 92A 66B | (10.12.2020)

4 |
(1)
(2)
(3)
(8)
C
B
(1)
(10)
(9)
1 609 92A 66B | (10.12.2020) Bosch Power Tools

| 5
(15)
D
(16)
(17)
(18)
(19)
Bosch Power Tools 1 609 92A 66B | (10.12.2020)

6 |
(3)
F
E
(20)
1 609 92A 66B | (10.12.2020) Bosch Power Tools

English | 21
gesammelt und einer umweltgerechten Wiederverwendung zugeführt wer-
den.
Akkus/Batterien:
Li-Ion:
Bitte beachten Sie die Hinweise im Abschnitt Transport (siehe „Transport“,
Seite20).
uIntegrierte Akkus dürfen zur Entsorgung nur von Fachpersonal ent-
nommen werden. Durch das Öffnen der Gehäuseschale kann das
Elektrowerkzeug zerstört werden.
Um den Akku aus dem Elektrowerkzeug zu entnehmen, betätigen Sie das
Elektrowerkzeug so lange, bis der Akku vollständig entladen ist. Drehen Sie
die Schrauben am Gehäuse heraus und nehmen Sie die Gehäuseschale ab,
um den Akku zu entnehmen. Um einen Kurzschluss zu verhindern, trennen
Sie die Anschlüsse am Akku einzeln nacheinander und isolieren Sie anschlie-
ßend die Pole. Auch bei vollständiger Entladung ist noch eine Restkapazität
im Akku enthalten, die im Kurzschlussfall freigesetzt werden kann.
English
Safety instructions
General Power Tool Safety Warnings
WARNING Read all safety warnings, instructions, illustra-
tions and specifications provided with this power
tool. Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (cor-
ded) power tool or battery-operated (cordless) power tool.
Work area safety
uKeep work area clean and well lit. Cluttered or dark areas invite acci-
dents.
Bosch Power Tools 1 609 92A 66B | (10.12.2020)

22 | English
uDo not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
uKeep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
Electrical safety
uPower tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric
shock.
uAvoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
uDo not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
uDo not abuse the cord. Never use the cord for carrying, pulling or un-
plugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of elec-
tric shock.
uWhen operating a power tool outdoors, use an extension cord suit-
able for outdoor use. Use of a cord suitable for outdoor use reduces the
risk of electric shock.
uIf operating a power tool in a damp location is unavoidable, use a re-
sidual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
Personal safety
uStay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of inat-
tention while operating power tools may result in serious personal injury.
uUse personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non-skid safety shoes, hard
hat or hearing protection used for appropriate conditions will reduce per-
sonal injuries.
uPrevent unintentional starting. Ensure the switch is in the off-posi-
tion before connecting to power source and/or battery pack, picking
1 609 92A 66B | (10.12.2020) Bosch Power Tools

English | 23
up or carrying the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on invites acci-
dents.
uRemove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
uDo not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
uDress properly. Do not wear loose clothing or jewellery. Keep your
hair and clothing away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
uIf devices are provided for the connection of dust extraction and col-
lection facilities, ensure these are connected and properly used. Use
of dust collection can reduce dust-related hazards.
uDo not let familiarity gained from frequent use of tools allow you to
become complacent and ignore tool safety principles. A careless ac-
tion can cause severe injury within a fraction of a second.
Power tool use and care
uDo not force the power tool. Use the correct power tool for your ap-
plication. The correct power tool will do the job better and safer at the
rate for which it was designed.
uDo not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
uDisconnect the plug from the power source and/or remove the bat-
tery pack, if detachable, from the power tool before making any ad-
justments, changing accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting the power tool acci-
dentally.
uStore idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to oper-
ate the power tool. Power tools are dangerous in the hands of untrained
users.
uMaintain power tools and accessories. Check for misalignment or
binding of moving parts, breakage of parts and any other condition
that may affect the power tool’s operation. If damaged, have the
Bosch Power Tools 1 609 92A 66B | (10.12.2020)

24 | English
power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
uKeep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
uUse the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and
the work to be performed. Use of the power tool for operations differ-
ent from those intended could result in a hazardous situation.
uKeep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces do not allow for safe
handling and control of the tool in unexpected situations.
Battery tool use and care
uRecharge only with the charger specified by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk of
fire when used with another battery pack.
uUse power tools only with specifically designated battery packs. Use
of any other battery packs may create a risk of injury and fire.
uWhen battery pack is not in use, keep it away from other metal ob-
jects, like paper clips, coins, keys, nails, screws or other small metal
objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
uUnder abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If li-
quid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
uDo not use a battery pack or tool that is damaged or modified. Dam-
aged or modified batteries may exhibit unpredictable behaviour resulting
in fire, explosion or risk of injury.
uDo not expose a battery pack or tool to fire or excessive temperat-
ure. Exposure to fire or temperature above 130°C may cause explosion.
uFollow all charging instructions and do not charge the battery pack
or tool outside the temperature range specified in the instructions.
Charging improperly or at temperatures outside the specified range may
damage the battery and increase the risk of fire.
1 609 92A 66B | (10.12.2020) Bosch Power Tools

English | 25
Service
uHave your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the
power tool is maintained.
uNever service damaged battery packs. Service of battery packs should
only be performed by the manufacturer or authorized service providers.
Safety Warnings for Screwdrivers
uHold the power tool by insulated gripping surfaces, when performing
an operation where the fastener may contact hidden wiring. Fasten-
ers contacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
uUse suitable detectors to determine if there are hidden supply lines
or contact the local utility company for assistance. Contact with elec-
tric cables can cause fire and electric shock. Damaging gas lines can lead
to explosion. Breaking water pipes causes property damage.
uHold the power tool securely. When tightening and loosening screws be
prepared for temporarily high torque reactions.
uBefore any work on the power tool (e.g. maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the middle position. There is risk of injury from uninten-
tionally pressing the on/off switch.
uSecure the workpiece. A workpiece clamped with clamping devices or in
a vice is held more secure than by hand.
uAlways wait until the power tool has come to a complete stop before
placing it down. The application tool can jam and cause you to lose con-
trol of the power tool.
Protect the power tool against heat, e.g. against con-
tinuous intense sunlight, fire, water, and moisture.
There is a risk of explosion.
Safety instructions for power supply
uThis power supply is not intended for use by children or persons with
physical, sensory or mental limitations or a lack of experience or
knowledge. This power supply can be used by children aged 8 or
older and by persons who have physical, sensory or mental limita-
Bosch Power Tools 1 609 92A 66B | (10.12.2020)

26 | English
tions or a lack of experience or knowledge if a person responsible for
their safety supervises them or has instructed them in the safe oper-
ation of the power supply and they understand the associated
dangers. Otherwise, there is a risk of operating errors and injuries.
Do not expose the power supply to rain or wet conditions. Water
entering the power supply will increase the risk of electric shock.
uKeep the power supply clean. Dirt poses a risk of electric shock.
uAlways check the power supply before use. Stop using the power
supply if you discover any damage. Do not open the power supply
yourself, and have it repaired only by a qualified specialist using only
original replacement parts. Damaged power supplies increase the risk
of electric shock.
Product Description and Specifications
Read all the safety and general
instructions. Failure to observe the
safety and general instructions may
result in electric shock, fire and/or
serious injury.
Please observe the illustrations at the beginning of this operating manual.
Intended Use
The power tool is intended for screwing in and loosening screws.
Product features
The numbering of the product features refers to the diagram of the power
tool on the graphics page.
(1) Screwdriver bita)
(2) Tool holder
(3) Rubber cap
(4) Battery charge indicator
(5) Rotational direction switch
(6) Hole for attaching a strap
1 609 92A 66B | (10.12.2020) Bosch Power Tools

English | 27
(7) On/off switch
(8) Point lens
(9) Dispersing lens
(10) Worklight
(11) Handle (insulated gripping surface)
(12) Port for charging cable
(13) Charging cable
(14) Power supplya)
(15) Off-set angle adaptera)
(16) Angle screw adaptera)
(17) Torque setting adaptera)
(18) Torque presetting ringa)
(19) Mark for torque adjustmenta)
(20) Unlocking ringa)
a) Accessories shown or described are not included with the product as stand-
ard. You can find the complete selection of accessories in our accessories
range.
Technical Data
Cordless screwdriver IXO
Article number 3603JA80..
Rated voltage V= 3.6
No-load speed min-1 215
Max. torque, hard/soft screwdriving
application according to ISO5393
Nm 4.5/3
Max. screw diameter mm 5
Weight according to
EPTA-Procedure 01:2014
kg 0.30
Recommended ambient temperature
during charging
°C 0 to +45
Permitted ambient temperature dur-
ing operationA)B) and during storage
°C –20 to +50
Bosch Power Tools 1 609 92A 66B | (10.12.2020)

28 | English
Cordless screwdriver IXO
Rechargeable battery Li-ion
Capacity Ah 1.5
Energy Wh 5.4
Number of battery cells 1
Power supply
Article number 2 609 120 713 (EU)
1 600 A00 3RK (EU)
2 609 120 718 (UK)
1 600 A00 48V (UK)
2 609 120 717 (AUS)
1 600 A00 48U (AUS)
Max. charging time h 4
Protection class /II
For additional technical data, visit: www.bosch-do-it.com/ecodesign
Charging cable
Article number 1 607 000 CG9 (EU |
UK | AUS)
A) Limited performance at temperatures <0°C
B) Overheat protection stops the power tool at temperatures > +65 °C.
Noise/vibration information
Noise emission values determined according to EN62841-2-2.
Typically, the A-weighted sound pressure level of the power tool is less than
70dB(A). The noise level when working can exceed the volume stated.
Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty K determined ac-
cording toEN62841-2-2:
Screwdriving: ah <2.5 m/s2, K=1.5 m/s2
The vibration level and noise emission value given in these instructions have
been measured in accordance with a standardised measuring procedure and
may be used to compare power tools. They may also be used for a prelimin-
ary estimation of vibration and noise emissions.
1 609 92A 66B | (10.12.2020) Bosch Power Tools

English | 29
The stated vibration level and noise emission value represent the main ap-
plications of the power tool. However, if the power tool is used for other ap-
plications, with different application tools or is poorly maintained, the vibra-
tion level and noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total working period.
To estimate vibration and noise emissions accurately, the times when the
tool is switched off or when it is running but not actually being used should
also be taken into account. This may significantly reduce vibration and noise
emissions over the total working period.
Implement additional safety measures to protect the operator from the ef-
fects of vibration, such as servicing the power tool and application tools,
keeping their hands warm, and organising workflows correctly.
Assembly
uBefore any work on the power tool (e.g. maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the middle position. There is risk of injury from uninten-
tionally pressing the on/off switch.
Battery Charging (see figure A)
uDo not use any other charger. The supplied charger is matched to the
lithium-ion battery that is fitted in your power tool.
uPay attention to the mains voltage. The voltage of the power source
must match the voltage specified on the rating plate of the charger. Char-
gers marked 230 V can also be operated at 220 V.
Note: The battery is supplied partially charged. To ensure full battery capa-
city, fully charge the battery in the charger before using your power tool for
the first time.
The lithium-ion battery can be charged at any time without reducing its ser-
vice life. Interrupting the charging process does not damage the battery.
The li-ion battery is protected against deep discharge. When the battery is
discharged, the power tool is switched off by means of a protective circuit:
The application tool stops moving and you can hear a soft whistling sound.
uDo not continue to press the On/Off switch after the power tool has
automatically switched off. The battery can be damaged.
Bosch Power Tools 1 609 92A 66B | (10.12.2020)

30 | English
If the battery charge indicator (4) lights up red when you press the on/off
switch (7) half way in, the remaining battery capacity is less than 30% and
the battery should be charged.
To charge the battery, plug the charging cable (13) into the port (12) on the
bottom of the handle and into the power supply (14). Plug the power supply
(14) into the plug socket.
The charging process is interrupted when the on/off switch (7) is fully
pressed.
The battery charge indicator (4) indicates the charging progress. The indic-
ator lights up in green during the charging process. When the battery is fully
charged, the battery charge indicator (4) goes out.
During the charging process, the handle of the power tool will become
warm. This is normal.
If you are not planning to use the power tool again soon, disconnect the
charger from the mains.
The power tool cannot be used during the charging process. It is not defect-
ive if it does not work during the charging process.
uProtect the charger from moisture.
Follow the instructions on correct disposal.
Changing the tool (see figure B)
uDo not use two-sided screwdriver blades that are longer than 25mm.
Insert the screwdriver bit (1) directly into the tool holder (2).
Switching on the worklight (see figure C)
By turning the rubber cap (3), you can set the worklight (10) to focused or
diffused light as required. ➊ Remove the rubber cap by pulling it towards
you and ➋ place it back on the tool holder (2) with the appropriate lens.
Off-set Angle Adapter/Angle Screw Adapter/Torque Setting
Adapter (see figures C–F)
You can drive in screws close to edges using the off-set angle adapter (15).
The angle screw adapter (16) enables you to drive screws in hard-to-reach
areas.
1 609 92A 66B | (10.12.2020) Bosch Power Tools

English | 31
The torque presetting ring (18) on the torque setting adapter (17) can be
used to pre-select the required torque in 10 stages. When the correct set-
ting is used, the bit will be stopped as soon as the screw is driven flush into
the material or as soon as the set torque has been reached.
Fitting (see figures C–D)
To fit the adapters, pull off the rubber cap (3) towards you. Then the ad-
apters can be attached. It is possible to fit an adapter offset by 45°.
Removal (see figures E–F)
To remove an adapter, turn the unlocking ring (20) in rotational direction ➊
and pull the adapter off towards you. Then reattach the rubber cap (3).
Operation
Starting Operation
Setting the rotational direction
The rotational direction switch (5) is used to change the rotational direction
of the power tool. However, this is not possible while the on/off switch (7) is
being pressed.
uOnly operate the rotational direction switch (5) when the power tool
is not in use. Otherwise it may become damaged.
Clockwise rotation: To drive in screws, slide the rotational direction switch
(5) forward to the stop.
Anti-clockwise rotation: To loosen or unscrew screws, slide the rotational
direction switch (5) backwards.
Switching on/off
To start the power tool, press and hold the on/off switch (7).
The worklight (10) lights up when the on/off switch (7) is lightly or fully
pressed, allowing the work area to be illuminated in poor lighting conditions.
To switch off the power tool, release the on/off switch (7).
Fully automatic spindle lock (Auto-Lock)
The drill spindle is locked when the on/off switch (7) is not pressed.
This allows screws to be driven in even when the battery is discharged and
enables the power tool to be used as a screwdriver.
Bosch Power Tools 1 609 92A 66B | (10.12.2020)

32 | English
uIf the drill spindle is blocked, do not press the on/off switch (7) for
longer than 15 seconds. Otherwise, the power tool may become dam-
aged.
Practical advice
uOnly apply the power tool to the screw when the tool is switched off.
Rotating application tools can slip off.
Maintenance and Service
Maintenance and Cleaning
uBefore any work on the power tool (e.g. maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the middle position. There is risk of injury from uninten-
tionally pressing the on/off switch.
uTo ensure safe and efficient operation, always keep the power tool
and the ventilation slots clean.
If the battery is no longer working, please contact an authorised after-sales
service agent for Bosch power tools.
In order to avoid safety hazards, if the power supply cord needs to be re-
placed, this must be done by Bosch or by an after-sales service centre that
is authorised to repair Bosch power tools.
In all correspondence and spare parts orders, please always include the
10‑digit article number given on the nameplate of the product.
After-Sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance
and repair of your product as well as spare parts. You can find explosion
drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any ques-
tions about our products and their accessories.
In all correspondence and spare parts orders, please always include the
10‑digit article number given on the nameplate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
1 609 92A 66B | (10.12.2020) Bosch Power Tools

English | 33
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection
of a product in need of servicing or repair.
Tel. Service: [phone]
E-Mail: [email protected]
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The contained lithium-ion batteries are subject to the Dangerous Goods Le-
gislation requirements. The batteries are suitable for road-transport by the
user without further restrictions.
When shipping by third parties (e.g.: by air transport or forwarding agency),
special requirements on packaging and labelling must be observed. For pre-
paration of the item being shipped, consulting an expert for hazardous ma-
terial is required.
Disposal
Power tools, rechargeable batteries, accessories and pack-
aging should be sorted for environmental-friendly recycling.
Do not dispose of power tools and batteries/rechargeable
batteries into household waste!
Only for EU countries:
According to the Directive 2012/19/EU, power tools that are no longer us-
able, and according to the Directive 2006/66/EC, defective or used battery
packs/batteries, must be collected separately and disposed of in an environ-
mentally correct manner.
Battery packs/batteries:
Li-ion:
Please observe the notes in the section on transport (see "Transport",
page33).
Bosch Power Tools 1 609 92A 66B | (10.12.2020)

34 | Français
uIntegrated batteries may only be removed for disposal by qualified
personnel. Opening the housing shell can destroy the power tool.
Before you can remove the battery from the power tool, you will need to use
the power tool until the battery is completely discharged. Unscrew the
screws on the housing and remove the housing shell in order to remove the
battery. To prevent a short circuit, disconnect the connectors on the battery
one at a time and then isolate the poles. Even when fully discharged, the bat-
tery still contains a residual capacity which can be released in case of a short
circuit.
Français
Consignes de sécurité
Avertissements de sécurité généraux pour l’outil électrique
AVERTISSE-
MENT
Lire tous les avertissements de sécurité, les ins-
tructions, les illustrations et les spécifications
fournis avec cet outil électrique. Ne pas suivre les
instructions énumérées ci-dessous peut provoquer un choc électrique, un
incendie et/ou une blessure sérieuse.
Conserver tous les avertissements et toutes les instructions pour pou-
voir s'y reporter ultérieurement.
Le terme "outil électrique" dans les avertissements fait référence à votre ou-
til électrique alimenté par le secteur (avec cordon d’alimentation) ou votre
outil électrique fonctionnant sur batterie (sans cordon d’alimentation).
Sécurité de la zone de travail
uConserver la zone de travail propre et bien éclairée. Les zones en
désordre ou sombres sont propices aux accidents.
uNe pas faire fonctionner les outils électriques en atmosphère explo-
sive, par exemple en présence de liquides inflammables, de gaz ou de
poussières. Les outils électriques produisent des étincelles qui peuvent
enflammer les poussières ou les fumées.
1 609 92A 66B | (10.12.2020) Bosch Power Tools

Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 66B (2020.12) AS / 212
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
ar   
1 609 92A 66B
IXO