Bosch PSR 7 User manual

Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
www.bosch-pt.com
2 609 005 644 (2011.09) O / 190 WEU
WEU WEU
PSR 7,2 LI
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Ðñùôüôõðï ïäçãéþí ÷ñÞóçò
tr Orijinal işletme talimat
ar
ΕΎϤϴϠόΗϞϴϐθΘϟ΍ΔϴϠλϷ΍
OBJ_DOKU-13451-004.fm Page 1 Tuesday, September 6, 2011 3:11 PM

| 3
Bosch Power Tools 2 609 005 644 | (6.9.11)
A
3
5
89
7
10
64
12
5
11
PSR 7,2 LI
OBJ_BUCH-781-004.book Page 3 Tuesday, September 6, 2011 3:13 PM

2 609 005 644 | (6.9.11) Bosch Power Tools
4|
C
B
1
1
2
9
9
OBJ_BUCH-781-004.book Page 4 Tuesday, September 6, 2011 3:13 PM

English | 19
Bosch Power Tools 2 609 005 644 | (6.9.11)
English
Safety Notes
General Power Tool Safety Warnings
Read all safety warnings and all instructions. Fail-
ure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work area safety
fKeep work area clean and well lit. Cluttered or dark areas invite acci-
dents.
fDo not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools cre-
ate sparks which may ignite the dust or fumes.
fKeep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
Electrical safety
fPower tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodifiedplugs andmatching outletswill reduceriskof
electric shock.
fAvoid body contact with earthed or grounded surfaces, such as
pipes,radiators, rangesand refrigerators. Thereisan increased risk
of electric shock if your body is earthed or grounded.
fDonot expose power tools to rain or wet conditions. Waterentering
a power tool will increase the risk of electric shock.
fDo not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges and moving parts. Damaged or entangled cords increase the
risk of electric shock.
WARNING
OBJ_BUCH-781-004.book Page 19 Tuesday, September 6, 2011 3:13 PM

2 609 005 644 | (6.9.11) Bosch Power Tools
20 | English
fWhen operating a power tool outdoors, use an extension cord suit-
able for outdoor use. Use of a cord suitable for outdoor use reduces
the risk of electric shock.
fIf operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD re-
duces the risk of electric shock.
Personal safety
fStay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
orundertheinfluenceof drugs,alcohol ormedication. Amoment of
inattention while operating power tools may result in serious personal
injury.
fUse personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
fPrevent unintentional starting. Ensure the switch is in the off-po-
sition before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your finger
on the switch or energising power tools that have the switch on invites
accidents.
fRemoveanyadjusting keyor wrench beforeturning the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
fDo not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
fDress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from movingparts. Loose clothes,
jewellery or long hair can be caught in moving parts.
fIf devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly
used. Use of dust collection can reduce dust-related hazards.
Power tool use and care
fDonot force thepower tool. Usethecorrectpower tool for your ap-
plication. The correct power tool will do the job better and safer at the
rate for which it was designed.
OBJ_BUCH-781-004.book Page 20 Tuesday, September 6, 2011 3:13 PM

English | 21
Bosch Power Tools 2 609 005 644 | (6.9.11)
fDo not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
fDisconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments, chang-
ing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
fStore idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to op-
erate the power tool. Power tools are dangerous in the hands of un-
trained users.
fMaintain power tools. Check for misalignment or binding of mov-
ing parts, breakage of parts and any other condition that may af-
fect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly main-
tained power tools.
fKeep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier to
control.
fUse the power tool, accessories and tool bits etc. in accordance
withthese instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
Battery tool use and care
fRecharge only with the charger specified by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk of
fire when used with another battery pack.
fUse power tools only with specifically designated battery packs.
Use of any other battery packs may create a risk of injury and fire.
fWhen battery pack is not in use, keep it away from other metal ob-
jects,like paperclips,coins, keys, nails, screws orother small met-
al objects, that can make a connection from one terminal to anoth-
er. Shorting the battery terminals together may cause burns or a fire.
fUnder abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
OBJ_BUCH-781-004.book Page 21 Tuesday, September 6, 2011 3:13 PM

2 609 005 644 | (6.9.11) Bosch Power Tools
22 | English
Service
fHave your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
Safety Warnings for Screwdriver
fHold power tool by insulated gripping surfaces, when performing
an operation where the fastener may contact hidden wiring. Fas-
teners contacting a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric shock.
fHold the machine with a firm grip. High reaction torque can briefly
occur while driving in and loosening screws.
fAlways wait until the machine has come to a complete stop before
placingit down.The tool insert can jamand lead toloss of controlover
the power tool.
fBefore any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational di-
rection switch to the centre position. Unintentional actuation of the
On/Off switch can lead to injuries.
Protect the power tool against heat, e. g., against continu-
ous intense sunlight, fire, water, and moisture. Danger of
explosion.
fIncaseofdamage andimproper useofthe battery,vapoursmaybe
emitted. Provide for fresh air and seek medical help in case of
complaints. The vapours can irritate the respiratory system.
Safety Warnings for battery chargers
Keep the battery charger away from rain or moisture. Pen-
etration of water in the battery charger increases the risk of an
electric shock.
fOnly charge Bosch lithium ion batteries or batteries installed in
Bosch products with the voltages listed in the technical data. Oth-
erwise there is danger of fire and explosion.
fKeep the battery charger clean. Contamination can lead to danger of
an electric shock.
fBefore each use, check thebattery charger,cable andplug. If dam-
age is detected, do not use the battery charger. Never open the
OBJ_BUCH-781-004.book Page 22 Tuesday, September 6, 2011 3:13 PM

English | 23
Bosch Power Tools 2 609 005 644 | (6.9.11)
battery charger yourself. Have repairs performed only by a quali-
fied technician and only using original spare parts. Damaged bat-
tery chargers, cables and plugs increase the risk of an electric shock.
fDo not operate the battery charger oneasily inflammable surfaces
(e. g., paper, textiles, etc.) or surroundings. The heating of the bat-
tery charger during the charging process can pose a fire hazard.
fSupervise children. This will ensure that children do not play with the
charger.
fChildrenor personsthatowing totheirphysical, sensory ormental
limitations or to their lack of experience or knowledge, are not ca-
pable of securely operating the charger, may only use this charger
undersupervision orafterhaving beeninstructed bya responsible
person. Otherwise, there is danger of operating errors and injuries.
Products sold in GB only: Your product is fitted with an BS 1363/A ap-
proved electric plug with internal fuse (ASTA approved to BS 1362).
Ifthe plugis not suitableforyour socket outlets,it should be cut off and an
appropriate plug fitted in its place by an authorised customer service
agent. The replacement plug should have the same fuse rating as the orig-
inal plug.
The severed plug must be disposed of to avoid a possible shock hazard
and should never be inserted into a mains socket elsewhere.
Product Description and Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Intended Use
The machine is intended for driving in and loosening screws.
Product Features
The numbering of the product features refers to the illustration of the ma-
chine on the graphics page.
1Screwdriver bit*
2Tool holder
OBJ_BUCH-781-004.book Page 23 Tuesday, September 6, 2011 3:13 PM

2 609 005 644 | (6.9.11) Bosch Power Tools
24 | English
3Torque preselection ring
4Indicator for right rotation
5Battery charge-control indicator
6Indicator for left rotation
7“PowerLight”
8On/Off switch
9Rotational direction switch
10 Handle (insulated gripping surface)
11 Battery charger
*Accessories shown or described are not part of the standard delivery scope of
the product. A complete overview of accessories can be found in our acces-
sories program.
Technical Data
Cordless Screwdriver PSR 7,2 LI
Article number 3 603 J57 7..
Rated voltage V= 7.2
No-load speed min-1 0–230
Max. torque for hard/soft screwdriving
application according to ISO 5393 Nm 10/6
Max. screw dia. mm 6
Weight according to EPTA-Procedure
01/2003 kg 0.5
Battery Li-Ion
Capacity Ah 1.3
Number of battery cells 2
Battery Charger
Article number 2 607 225 553 (EU)
2 607 225 555 (UK)
Charging time h5.0
Protection class /II
Please observe the article number on the type plate of your machine. The trade names
of the individual machines may vary.
OBJ_BUCH-781-004.book Page 24 Tuesday, September 6, 2011 3:13 PM

English | 25
Bosch Power Tools 2 609 005 644 | (6.9.11)
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product is less than
70 dB(A). Uncertainty K =3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values ah(triax vector sum) and uncertainty K determined
according to EN 60745:
Screwdriving without impact: ah<2.5m/s2, K =1.5 m/s2.
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a pre-
liminary assessment of exposure.
The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibration emission may differ.
This may significantly increase the exposure level over the total working
period.
Anestimation of thelevel of exposureto vibration should alsotake into ac-
count the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator from the ef-
fects of vibration such as: maintain the tool and the accessories, keep
hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product described un-
der “Technical Data” is in conformity with the following standards or
standardization documents: EN 60745 (battery powered products) and
EN 60335(battery chargers)accordingtothe provisionsofthedirectives
2011/65/EU, 2006/95/EC, 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
08
OBJ_BUCH-781-004.book Page 25 Tuesday, September 6, 2011 3:13 PM

2 609 005 644 | (6.9.11) Bosch Power Tools
26 | English
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
01.09.2011
Assembly
fBefore any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational di-
rection switch to the centre position. Unintentional actuation of the
On/Off switch can lead to injuries.
Battery Charging (see figure A)
fDo not use other battery chargers. The supplied battery charger is
designed for the Lithium-Ion battery in your machine.
fObserve the mains voltage! The voltage of the power supply must
correspond with the data given on the nameplate of the battery charg-
er. Battery chargers marked with 230 V can also be operated with
220 V.
Note: The battery is supplied partially charged. To ensure full capacity of
the battery, completely charge the battery in the battery charger before
using your power tool for the first time.
The lithium-ion battery can be charged at any time without reducing its
servicelife. Interrupting thecharging proceduredoesnotdamagethe bat-
tery.
The lithium-ion batteryis protected against deep discharging by the“Elec-
tronic Cell Protection (ECP)”. When the battery is empty, the machine is
switched off by means of a protective circuit: The inserted tool no longer
rotates.
Do not continue to press the On/Off switch after
the machine has been automatically switched
off. The battery can be damaged.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
WARNING
OBJ_BUCH-781-004.book Page 26 Tuesday, September 6, 2011 3:13 PM

English | 27
Bosch Power Tools 2 609 005 644 | (6.9.11)
The charging procedure starts as soon as the main plug of the battery
charger is inserted into the socket and the cordless screwdriver is after-
wards placed on the battery charger 11.
The battery charge-control indicator 5indicates the charging progress.
During the charging procedure, the indicator flashes green. The battery
is fully charged when the indicator lights up green continuously.
During the charging procedure, the handle of the machine warms up. This
is normal.
Disconnect the battery charger from the mains supply when not using it
for longer periods.
The power tool cannot be used during the charge procedure; it is not de-
fective when inoperative during the charging procedure.
Observe the notes for disposal.
Changing the Tool (see figure B)
fDo not use double-sided screwdriver blades that are longer than
25 mm.
Insert the screwdriver bit 1directly into the tool holder 2.
Operation
Starting Operation
Reversing the Rotational Direction (see figure C)
Therotationaldirectionswitch9isusedtoreverse therotationaldirection
of the machine.However, this is not possible with the On/Off switch 8ac-
tuated.
Rightrotation: For drivingin screws, pushtherotational direction switch
9left to the stop.
The indicator for right rotation 4lights up when the On/Off
switch 8is actuated and the motor is running.
Left Rotation: For loosening or unscrewing screws, push the rotational
direction switch 9right to the stop.
The indicator for left rotation 6lights up when the On/Offswitch
8is actuated and the motor is running.
OBJ_BUCH-781-004.book Page 27 Tuesday, September 6, 2011 3:13 PM

2 609 005 644 | (6.9.11) Bosch Power Tools
28 | English
Setting the Torque
With the torque preselection ring 3, the required torque can be preselect-
ed in 10 steps. The inserted tool is stopped as soon as the set torque is
reached.
Position 1:
Lower torque for screwing in screws with small diameter or into soft ma-
terials.
Position 10:
Higher torque for screwing in screws with large diameter or into hard ma-
terials.
Switching On and Off
To start the machine, press the On/Off switch 8and keep it pressed.
The power light 7lights up when the On/Off switch 8is slightly or com-
pletely pressed, and allows the work area to be illuminated when lighting
conditions are insufficient.
To switch off the machine, release the On/Off switch 8.
Adjusting the Speed
The speed of the switched on power tool can be variably adjusted, de-
pending on how far the On/Off switch 8is pressed.
Light pressure on the On/Off switch 8results in a low rotational speed.
Further pressure on the switch results in an increase in speed.
Fully automatic spindle locking (Auto-lock)
When the On/Off switch 8is not pressed, the drill spindle and thus the
tool holder are locked.
This enables screws tobe screwed in, even when the battery is empty and
allows for the machine to be used as a screwdriver.
Temperature Dependent Overload Protection
Whenusing as intended for,the power toolcannotbe subject tooverload.
When the load is too highor the allowable battery temperature of 70 °C is
exceeded, the electronic control switches off the power tool until the tem-
perature is in the optimum temperature range again.
OBJ_BUCH-781-004.book Page 28 Tuesday, September 6, 2011 3:13 PM

English | 29
Bosch Power Tools 2 609 005 644 | (6.9.11)
Protection Against Deep Discharging
Thelithium-ion batteryis protected againstdeep dischargingby the “Elec-
tronic Cell Protection (ECP)”. When the battery is empty, the machine is
switched off by means of a protective circuit: The inserted tool no longer
rotates.
Working Advice
fApply the power tool to the screw only when it is switched off. Ro-
tating tool inserts can slip off.
Maintenance and Service
Maintenance and Cleaning
fBefore any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational di-
rection switch to the centre position. Unintentional actuation of the
On/Off switch can lead to injuries.
fFor safe and proper working, always keep the machine and venti-
lation slots clean.
When the battery is no longer operative, please refer to an authorised af-
ter-sales service agent for Bosch power tools.
If the machine should fail despite the care taken in manufacturing and
testing procedures, repair should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order, please always include the
10-digit article number given on the type plate of the machine.
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concerning mainte-
nance and repair of your product as well as spare parts. Exploded views
and information on spare parts can also be found under:
www.bosch-pt.com
Our customer service representatives can answer your questions con-
cerning possible applications and adjustment of products and accesso-
ries.
OBJ_BUCH-781-004.book Page 29 Tuesday, September 6, 2011 3:13 PM

2 609 005 644 | (6.9.11) Bosch Power Tools
30 | English
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: [phone]
Fax: [phone]
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: [phone]
Fax: [phone]
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: [phone]
Fax: [phone]
Inside New Zealand:
Phone: [phone]
Fax: [phone]
Outside AU and NZ:
Phone: [phone]
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: [phone]
OBJ_BUCH-781-004.book Page 30 Tuesday, September 6, 2011 3:13 PM

English | 31
Bosch Power Tools 2 609 005 644 | (6.9.11)
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Bosch Headquarters
Midrand, Gauteng
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Transport
The contained lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements. The user can transport the batteries by road
without further requirements.
When being transported by third parties (e.g.: air transport or forwarding
agency), special requirements on packaging and labelling must be ob-
served. Forpreparation of the item being shipped, consulting an expert
for hazardous material is required.
Disposal
The machine, rechargeable batteries, accessories and packaging
should be sorted for environmental-friendly recycling.
Do not dispose of power tools and batteries/rechargeable batteries into
household waste!
OBJ_BUCH-781-004.book Page 31 Tuesday, September 6, 2011 3:13 PM

2 609 005 644 | (6.9.11) Bosch Power Tools
32 | English
Only for EC countries:
According to the European Guideline 2002/96/EC,
power tools that are no longer usable, and according to
the European Guideline 2006/66/EC, defective or
used battery packs/batteries, must be collected sepa-
rately and disposed of in an environmentally correct
manner.
Batteries no longer suitable for use can be directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: [phone]
Fax: [phone]
E-Mail: [email protected]
Battery packs/batteries:
Li-ion:
Please observe the instructions in section “Trans-
port”, page 31.
fIntegrated batteries may only be removed for disposal. Opening
the housing shell can damage or destroy the power tool.
When removing the battery from the machine, actuate the On/Off switch
8until the battery is completely discharged. Unscrew the screw in the
casing and take off the casing shell. Disconnect the connections on the
battery and remove the battery.
Subject to change without notice.
OBJ_BUCH-781-004.book Page 32 Tuesday, September 6, 2011 3:13 PM